Extremely Rusty Wrench Restoration - Antique Adjustable Wrench Restoration
Vložit
- čas přidán 18. 03. 2023
- Restoration Video Overview
This restoration video took a lot of hard work and a lot of time.This old wrench we found under the soil was heavily battled and looked like it was twenty years old.First of all we took off its rust and separated all its parts And each part thoroughly cleaned and polished like glass.In the end it turned out great, now it's usable
#restoration #restorationvideos #restoring #antique #repair #rescue #antiquerestoration #asmrrestoration #restoringoldtools #oldtools #rusty #rustyrestoration #restorationvideos #restoringoldthings - Zábava
Моё мнение таково - 1. Мастер поторопился с полировкой, надо было ещё поработать мелкой шкуркой, видны риски. 2. Почему не выпрямлена деталь ключа? 3. Надо было лучше обработать зубцы. И заведите себе пескоструй, будет легче. В целом неплохо!
Right But We have not sandblaster ...
*_this channel is a masterpiece. no loud intros no annoying music or talking. It is absolute mastery at its finest. Thank You._*
Thanks restoration solution☺😍
...but we get fake sound effects.
@@jensumayer yes, that's annoying.
@@jensumayer fhxnxnfbfhhfg677uz❤zhhggjvfgfgfghbvccvvvmxllcllm mmmbmbmllllllllll,,,,m,,,,lnkkkm,lmnjmkjjbnnnbnnnnnnkmmklllööööpppölkkkkklkkkjjjjjjjjkö.äääääää
Sure am glad you showed us how to insert the tube into the spray rust can. That's where I moved on to other restoration videos.
Good work made in England amazing
Shine like a diamond, perfect👍👍👍
Ahan thanks bro☺
supar restoration work 👍
impecable!!!!!! ( el video, espectacular !!! )
Adjustable jaw should be parallel with fixed jaw. Adjustable jaw was obviously bent and needed to be straightened. Otherwise it won't grip pipe properly. Nice work otherwise.
Thanks William Styers for information.☺☺
Lol shut up
I believe that the angle of the jaws is intentional. If they were truly parallel it wouldn’t allow for the jaw to let go when turning the opposite way. I could be wrong but when you google photos of a pipe wrench hardly any are parallel.
Why not start with the wire brush instead of a screwdriver?
Good work ❤
Thank you! 😊
Could u restore this world please? Thanks
Très beau travail!!! BRAVO👏👏👏👏
Thanks bro
Good very good 👏👏🌹🍀🍀
Thank you very much
good work
This tool appeared to be caked in mud and dirt, rather than rust.
Got to agree. If that had been badly rusted there would marks where the rust had penetrated.
Nicely done.👍🇺🇸👍
thanks Frank
Those upper and lower jaws should fit together. The upper jaw/thread assembly needs straightening.
Very Nice Project #Greatprocess
Thanks
wow
Good job. You cleaned and polished, but you forgot an important thing. The teeth are corroded, so it will not work well
Thank you very much for telling In Sha Allah next time will fix it.😊
Beautiful!
It is sad, from the industrial revolution to the financial center to the restoration of old things made in England, and in the background you can hear the Mosque as the last nail in the coffin of England
Soap and water would been cheaper that $50 worth of wd40 you wasted washing that mud not rust off
Wrong
Really a Masterpiece 🤩
Thanks StJ faCt😍
Bravo, maestro!
Thanks
Bravo, bravo, abs. good work, video and product, respectful from old BG.
Many thanks! Bro😊
Good job, I just don't understand why all that sanding on the first piece ...
Muy buen trabajo. Felicitaciones. Saludos de Uruguay.
Thanks Bro
You put in some serious time and elbow grease 👌. Great job
Yes, thanks bro
What's the point of the sandpaper if you use the polisher afterwards?
Is that chromed steel? If not, won't it rust if you don't coat it with something like True Blue?
Nice work refurbishing this pipe wrench (monkey wrench). Since you polished it out so nice and shiny, maybe you need to nickel plate it to keep it from rusting now... Thumbs Up!
Thank you so much gary muncher.
Them magnet fishers pull rusty old tools like that constantly!
Dang. That took some patience!!
Nice.😊
Thanks RA😊
I like the ppe
WOW! You did one heck of a great job. I could tell how hard that was, man that tool was tempered HARD. But You did awesome working with that. You pretty much polished a file lol. I'll bet it had to be a 60+ rockwell hardness
You did very well.
Thanks Masi
Good job 👍
Thank you! Cheers!
Пыточный инструмент однако! Выдиратель позвонков 😮 или ломатель хрящей 😂 Главное, что сделано в Англии! Знак качества и долгие годы работы обеспечены 👏 Терпению мастера 🏅😂😂😂
Зачем выпускать воздух с шприца если он не предназначен для вены? Да и от маленького пузыря воздуха если даже в вену то нечего страшного 😂😂😂
Just curious why didn’t you go at thus with wire wheel to start?
Fabulous...
Thanks zak for watching
Nice work! Respect!
Thank you! Cheers!
FICOU MAIS QUE NOVA PARABENS
Thanks bro
It is very new to show extreme close up of the cleaning process, loved it.
Thanks HM☺
Awesome job
Thank you! Cheers!
The appearance was restored perfectly, but the key remained inoperable, because the retractable part remained bent.
Thanks D.O☺
It remained bent and didn't filled in the worn teeth on the retractable jaw
عمل جميل جدا جدا وعاشت اليدي ❤
Thanks
Ok.god luck
Thanks Magali
good job . But the restoration of the tool costs much more than buying a new tool
En el minuto 20,58 y 59 MN y segundo creería que no estoy equivocado disculpen gracias
Thank yoy
Esta herramienta útil cual es es stilsson basulosa es sueca pero esta es inglesa alli dice su fábrcacion
U got your self anuver sub 👍👍
Good job
Thanks
And it's still worn out.
Awesome
good job
Thanks
Where do you get new pivot pins once you punch the old ones out? I don’t have the machinery to make them.
Originalmente la muela móvil que se ajusta con la tuerca redonda, tiene 90 grados con respecto a su espiga dentada. La que muestra el video se encuentra curvada, ésto indica que fue sometida a una palanca extrema de tracción, utilizando un tubo para extenter el mango. (Ësta herramienta, demuestra que sufrió fatiga de material)
Thanks brother for information
Where you found it ?
Great job ! 👍
Thanks bro
@@betarestoration You're welcome !
EU ACHEI TAMBEM
Really 😍🤔
Just came across your channel. You did an outstanding job cleaning and polishing this wrench, however I would suggest either nickel plating or cold bluing it for future rust protection. Also, was there a reason you didn't straighten out the bent part? Looking forward to more content!
Great suggestion!
Also some of the teeth that engage the adjustment Nut are broken, the moving jaw needs a lot of attention before it will be "useable"
Iso falta algo la barra espigada o roscada esta falseada o doblada asia arriba porque vi otros trabajos que no tenían ésa curvatura gracias
What is the red abrasive rotary pad you are using?
I think its bent. It needs to be straightened out first.
Un tutorial de como sacar brillo a un fierro viejo... Nada mas. Se desperdicia una cantidad preocupante de WD40, se puede usar agua caliente y un poco de detergente, al final le estan aplicando un cepillo de alambre y su carda correspondiente. Esperaba ver que enderezara la muela movil. Resultado: una herramienta antiguo reluciente pero inservible 😢.
عمل جميل
Thanks
Rất tốt ❤
Thanks
いい感じの!エイジング。!だねー。
Good restoration but you dont repair broken tooth
In Sha Allah next time i will definitely repair them ☺
Pipe wrenches are not supports to be smooth polished, they are supposed to be somewhat rough. Also, you could easily see that it was originally painted blue - an actual "restore" would have included painting it blue again. You've made a decoration out of it, not a working wrench.
Yes - very nice but did it really need all that polishing? It didn't come out of the factory looking like that.
Ahan
ну я все понимаю, но нахрена вдшкой смывать жижу после кордщетки???
1 cuestión don't fix the last part with fire? , AND I like ir the channel
Thanks bro
2:25 третья рука! 😁
😂
una lástima que no hayas enderezado la pieza movible, hubiera quedado como original
Bu tip restore videolarını seviyorum ve çok çeşitli you Tuber arkadaşları takip ediyorum,ancak hepinizin ilgi çekmek mi,seyir zevkini yükseltmek mı diyelim,çok ucuz numaralar yapiliyor,birincisi bu kadar adeta yıllarca toprak altında kalmış alet ve edavati nereden buluyorsunuz,bence eski ve hurda malzemeyi çamura bulayıp,toprağa gömüyorsunuz,ikincisi beş dakikada ılık veya kaynar suya atsanız üstündeki çamuru cikaracaginiz alete mütemadiyen işlem yapıyorsunuz,aslında bu göz boyayici hareketler, yapmış olduğunuz restore işini öldürmekten öte bir şey değil,yoksa sanatiniza ve ustalığını saçlarım yok,selamlar
Thanks for the information I will try better next time.☺☺
Fraudulent? 😠
Świetn jest zrobiona robota i bardzo świetnie jest to odrestaurowane ten zabytkowy klucz francuski pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍
Thanks Andrzed
Ne ho anch'io una uguale
Waoo great
😮
Oi amigão você só restaurou a marcenaria, e o resto porquê não? Iria ficar lindo todo restaurado e uma observação esse rádio precisa de uma antena pra funcionar ok
thank you very much my friend.☺
I would have sandblasted the parts initially, then used anti rust .....additionally, smoothing out the surfaces renders the tool more slippery. In my opinion, the tool should have the coarse surfaces, as a part of its character and for better grippage.
👍👏👍👏👍👏👍👏👍👏👍👏👍👏👍👏👍
Thanks bro.
The best work i've ever seen about restoration. A real love for this revival. You're the best of all the restorators. Precautious, patient, efficient... Congratulations !
How long did you work on this ?
Thanks Frederic
👍🌹
Bravo. You can take it to the dentist.
4 years later
You spent a lot of hours restoring a common pipe wrench, it looks great, but its still a piece of junk that wont work. The teeth will never work properly. Sandblasting would have been much faster.
Bel lavoro, ma bastava una semplice sabbiatura. Tutta questa lavorazione, portarlo ad un acciaio lucido, é stata inutile, perché si é fortemente limitata la ruvidità tipica dello strumento, che consente una presa sicura. Renderlo lucido lo rende scivoloso ed é solo vanità.
Above expectations......................
a lost wrench from Titanic
Красивая, но бестолковая работа. Ключ не восстановлен, а только почищен. Искривление не выравнено, сломанные зубья на резьбе не восстановлены. Такой ключ работать не будет. Время потрачено зря!!!
Yo no se porque este hombre desperdicia tanto aceite eso no es necesario con el cepillo se cae todo 3l oxido e impurezas.
Ahan great information brother
Коли є шліфмашина, але немає розуміння як виправити криву залізяку.
Looks like AA hands😅
It is also our channel bro.
😡 ~ I’ve been click-bated, the monkey-wrench in the thumbnail looks like it has rust photoshoped onto it
Pipe ranch , not monkey ranch.
Плохая реставрация. Много лишней и не нужной работы. И почему то не стал выпрямлять вторую половину ключа. Она так и осталась кривой...
🙄😶
Hmmm..przede wszystkim facet używa kilku rodzajów papieru do 100 włącznie,żeby potem używać szlifierki mechanicznej ...nie ma żadnego sensu.
zresztą taniej kupić w sklepie nowy
Brother it is not my hobby to buy them, it is my hobby to fix old things.☺
Frame it.