Reciprocating sander / DIY
Vložit
- čas přidán 5. 04. 2023
- Since one day, I've been getting tired of the tools I use on a daily basis.
Even sawing may be paying off the efforts of brands that have made them use band saws, jigsaw, and cut saws.
It's true that the annoyance and the desire for improvement that we feel when we do repetitive work have created and developed a lot of inventions.
I got tired of sanding wood on sandpaper.
With the touch of an experienced craftsman, it is of course important to grab the wood and rub it against the sandpaper to match the desired fine angle and size. It's also the delicate art of carpentry.
But sanding repeatedly is not a very pleasant task.
Alternative tools have also been developed. A swivel sander or belt sanding machine is an example.
I made a device that can automatically sandpaper.
The wood is fixed, and the sandpaper is made to do a reciprocating motion.
It was designed and assembled so that it could be like moving by hand.
We've been sanding trees with our hands, and it's a device that allows trees to stay still and sandpaper to make a round trip.
There are many structures that can do reciprocating motion, but I specifically used circular gears and flat gears to make them that can turn rotational force into reciprocating motion.
By controlling the speed of the motor, the sandpaper can be controlled at the speed of the round trip,
The sandpaper was attached to a flat magnet to allow it to be replaced so that it could stick to the bottom surface of the metal ruler.
And I made a jaw on all sides of the floor of the moving sandpaper so that it could act as a guide bar to hold the wood.
If you enjoyed watching the video, please subscribe and click like. Thank you.
#DIY #sanding - Jak na to + styl
Since one day, I've been getting tired of the tools I use on a daily basis.
Even sawing may be paying off the efforts of brands that have made them use band saws, jigsaw, and cut saws.
It's true that the annoyance and the desire for improvement that we feel when we do repetitive work have created and developed a lot of inventions.
I got tired of sanding wood on sandpaper.
With the touch of an experienced craftsman, it is of course important to grab the wood and rub it against the sandpaper to match the desired fine angle and size. It's also the delicate art of carpentry.
But sanding repeatedly is not a very pleasant task.
Alternative tools have also been developed. A swivel sander or belt sanding machine is an example.
I made a device that can automatically sandpaper.
The wood is fixed, and the sandpaper is made to do a reciprocating motion.
It was designed and assembled so that it could be like moving by hand.
We've been sanding trees with our hands, and it's a device that allows trees to stay still and sandpaper to make a round trip.
There are many structures that can do reciprocating motion, but I specifically used circular gears and flat gears to make them that can turn rotational force into reciprocating motion.
By controlling the speed of the motor, the sandpaper can be controlled at the speed of the round trip,
The sandpaper was attached to a flat magnet to allow it to be replaced so that it could stick to the bottom surface of the metal ruler.
And I made a jaw on all sides of the floor of the moving sandpaper so that it could act as a guide bar to hold the wood.
If you enjoyed watching the video, please subscribe and click like. Thank you.
#DIY #sanding
Great thinking. I have been flattening small items for 15 years standing by a 6x48 belt sander. I could have been setting by your sander doing the second operation while your machine did the first. Great thinking.
취미로 나만의것을 만들어 본다는건 항상 즐거움 입니다.
좋은작품 잘 보았습니다.
그 기쁨을 누구보다 잘 알고 있으실분 같습니다.
저도 특허를 20여가지 가지고 있습니다.
소통에서 더 많은걸 이룰수 있다고 생각합니다.
감사합니다.
얼마전부터 알게되어 영상 잘 보고 있습니다.
개인적으로 유튜브 채널 중에 제일 재미있게 보고 있습니다!! 창의적인 발명제품 항상 응원합니다!!
리뷰 채널과 DIY채널을 분리하느라 요즘 많이 힘들었는데, 기운이 납니다.
응원 말씀 덕분에 에너지가 충만해지는 느낌입니다.
더 유익한 영상을 만들수 있도록 노력하겠습니다.
감사합니다.
Brilliant piece of engineering. Great for us arthritics!
Thank you for the undeserved words of praise. I'm trying out a lot of different things. I will try to show you a new world of DIY. And, I think it might be really good for arthritis.
Coolest thing I seen on CZcams.
Thank you very much for your kind words. The hard feeling of making the work disappears like snow melting at your praise. I will try harder.
Amazing🤯🤯
Thanks for your praise!!!
now this is wicked cool !!!!
Thank you for your words of praise. I will work even harder. I promise to invite you to a new DIY world.
Verynice, just wish you would have made the enclosure out of acrylic!
That's a sharp point. I also tried to make an outer case with acrylic so that the inside could be seen, but I thought it would create a lot of dust during sanding, so I just made it out of wood. Thank you for your words.
Love your hand weights. Are they filled with sand or cement? Do you really have all those parts on hand, or do you source them, put them in a drawer, and then film taking them out of the drawer to make the video better? ;)
I get misunderstood sometimes. I have over 1,000 drawers full of parts. My goal is to use all of these parts that I have collected over 10 years. There are a lot of people who are curious, so I'll have to take a video of the parts someday. thank you!
Wonderfull
Thanks for your words!
trop top !!!
Thanks for your interest 🫡🫡
روووووووعه تسلم ايدك
Thanks for your kind words!
Hi there why buy something expensive when you biuld something much much cheaper amazing. X
Because I don't know that. One reason it may seem that way is because I try to use what I already have first. thank you!
Praticamente inviável, mas serve como um bom vídeo de entretenimento ✌
That's an accurate point. There may be limitations in practical use and utilization. However, there are many things to be gained in the process of these works. We can hone our skills, and also taste the joy of our designs and ideas being realized. Many people enjoy watching the process on video. Besides, I enjoy all these situations. thank you!
Brilliant! Thanks for sharing 🙂 the only feedback I have is I would not use that connector, but rather a standard iec320 for the power. But you are probably better at not misplacing cables than me 😅
The shapes of connectors vary greatly by region. I like this connector. A video of unifying all the wired tools I have with this connector will be uploaded soon. Thank you very much for your kind words. Let's go on a trip to the world of DIY with me.
@@Kynosys_ Oh, didn't think about that, I love the connector you use, but didn't know it handles AC well. I have only used it for 12VDC myself. :) I am probably only a bit biased towards the other connector because I have amassed an unhealthy amount of spares over the years :-P
It's so beautiful, can I buy the drawing?
When I work, I don't actually draw detailed drawings. By the way, many people have talked about it, so I'm thinking of making a precision blueprint and posting it on my homepage. I plan to reorganize www.kynosys.com soon. thank you
Very interesting design! I do like the slow speed! Well done! Columbus Michigan 🇺🇸
Интересно на сколько долговечная эта игрушка?
На основе подробных чертежей существуют изделия, изготовленные на станках с ЧПУ с использованием стальных или алюминиевых материалов. Вы говорите, что эти продукты не игрушки? Истинный дух DIY заключается в том, чтобы наслаждаться процессом изготовления. И менее чем за неделю, Долговечность, которую вы цените, еще не доказана. Когда у меня будет возможность, я дам вам знать позже.
Based on detailed drawings, there are products made by CNC using steel or aluminum materials. Are you saying those products aren't toys? The true spirit of DIY is to enjoy the process of making. And, in less than a week, The durability you value is still unproven. When I get a chance, I'll let you know later.
Спасибо большое
Хороших выходных!