EP. 8 - CUSTOM EXHAUST - Radial Airplane Motor Volkswagen + VERY SPECIAL GUEST **
Vložit
- čas přidán 22. 08. 2024
- On this episode we are designing and creating the exhausts, or headers. Being a rear mounted motor theres not much length- And only three cylinders its a pretty basic setup. So, to add the 'custom' we split each Exhaust flange into two. Making six individual pipes. A last minute idea to angle each pipe and flare the tip will really create a different design and add another small 'Aircraft' detail! Plus, we hang out with good friend Karl Fisher from Make it Kustom and put him to work!!
SHOUT US A BEER HERE!: www.paypal.com...
MERCHANDISE STORE
bennettscustom...
FOLLOW ON INSTAGRAM
@bennettscustomsco
www.instagram.... - Auta a dopravní prostředky
![NEW! Most Affordable Aircraft Engine! ZD Zongshen [FULL INTERVIEW] Clone Wars Rotax Vs. ZD CKD Aero](http://i.ytimg.com/vi/2RhL6DeMGYI/mqdefault.jpg)
Of all the hot rod channels I reckon you explain your reasoning and how to execute it the best, it also helps that you have a great sense of hot rod styling.
I appreciate that Craig! Thank you
A proud Canadian watching 2 of my favourite Canadian fabricators/designers "down unda". Nice anthem. Cheers
Right on! Thanks Dave!
Nice.
#STAYSAFE
#PHILLYPHILLY 🇺🇸
Nice Video. Looking Forward to seeing both if your Video of the Class.
#STAYSAFE
#PHILLYPHILLY 🇺🇸
Hello Jordan. So you’re telling me that Karl traveled all that way and forgot to pack one of those little air chamfer tools. So good to see old friends get together and have fun and games. O and the pipes turned out nice. I like the way you make sure every piece is square so that the fit and finish is much better. You show lots of love( in a manly way) cheers all the best. Tim.
Thanks Tim! It’s great having him here
Thanks for the Shout out Guys... gotta watch out for those inter galactic Laser Beams... could take an eye out.. More Mugs Soon!
Thank you again for those Mugs! We had a fair few coffees outta those already!
This was awesome! Seeing the whole crew together and the way you collaborate is absolute entertainment! Can't wait for the next videos from both you and Karl! That bespoke exhaust is turning out fantastic, truly a work of art and engineering! Josh was on camera so much I drank a six pack! Go Bennetts Customs and Japhands, keep moving forward!
Thank you as always Murdoc! Josh said drink up haha
Or you could slide in some miniature glass packs into the 6 inches of your straight pipe when it comes out. You can make your own Miniature glass packs for each pipe. take a piece of stainless smaller diameter and flange each end of it drill a bunch of holes in it wrap, fiberglass around the outside.
The bromance is strong 👍🏽
Good to see Karl finally made it over to OZ. Oh, and nice work on the exhaust system, too, JB!
Nice work again Jordan, and good to see Karl is back again, Aero engines are usually pretty loud and im guessing this one will be too, it will be interesting to see if it eventually passes inspection..... but it looks cool. I am glad you chose metal work instead of singing as your career lol. Cheers Greg
Thanks Greg, she will be waking up neighbourhoods soon
This episode should be called "Bennetts Customs - The Musical" 😂👍 Awesome as always! 🙌
Fantastic work as always, great supportive team, the quality is excellent
killer project!
Wow, great work!
I´m looking forward to hear the enginesound.
at 6;26 i did not like the way you were cutting pipe if something happened that cutting disc would go right through your wrist then next shot in the vice not worth the risk put it in the vice to start
Yep I agree. Made me think the same if the disc grabbed and shot forwards.
@@timferriss905 i was welding a gate had a guard on grinder needed to move guard done it when disc was slowing down like a thousand times before this time finger slipped cutting disc went through thick leather gloves into pad of index finger down to bone silly stupid and so now even more careful
We all take shortcuts but it says it there cuts.
Really great taste for hotrod detail, as always, and nice workshop! I await new videos with trepidation! 😃
Thank you very much Denny
looking good.
I like that exhaust. Great idea keeping with aircraft idea. Great to see Karl in your shop.
Great seeing Karl Made it down there! Looking forward to great content from both of you!
It’s been great having him!
Love that engine , informative exhaust tutorial, but best of all , having a laugh with your mates .
Glad you enjoyed it Sean!
Outstanding work on the exhaust!! Two of my favorite builders under the same roof! Wish I was there! Take care and have a great time!
Thank you Dale!
Don't you try to keep the pipes all the same lenght, especially with this type of engine ? I would also strongly recommend insulating the pipes, at least up to just before the bumper. They run very close to the cylinder heads.
otherwise brilliant work and thanks for the content. Greets from germany
That exhaust is a bloody work of art, but I see no attempt at mufflerising that lot. If it does turn out to be a bit too vocal for the locals could you possibly squeeze a 4 say inch common collector with baffles along the whole 6 pipes, so instead of each of the 6 pipes going straight out, they go into the side of the 4 inch then out the other side, via a baffle. Or maybe the cops don't care in WA so straight pipes it is.
They will run inserted mufflers
You really do a fantastic job,and I enjoy watching your videos thanks Eric from Edmonton 👍👍👍👍👍
Awesome, thank you Eric!
Excellent work and design Jordan on the EXHAUST and Great job Karl and good luck with the Course
Much appreciated John!
Brilliant work Jordan, that exhaust system is going to be so cool, love the tail pipe jig you made up too, great idea! Looks like you’re having fun with Karl !
Thanks! 👍
Creative and practical, wonderful combination to watch and be inspired by! Many thanks.
Thank you! Cheers!
Can’t wait to hear that thing braap-braap-braaping!
Me too!
Beautiful exhaust, excellent work on floor
This bus is pure art.
I just did the 45° pipe cut last week...angled laser...easy peacy...👍🤙
Nice work!
Unusual to see Karl wearing a singlet, not very often Canadian weather permits it ??????
I thought you were going to pop the tailpipes throught the bumper, like how it comes throught the body work of the planes, that would look so cool. Awesome work regardless 😎💪
Had thought about that! Still not completely out of the question
Funny you start singing 🎶 when Karl turns up,
Funny
On the karombus at last
Caution: Master Fabricators at Work - Enter at your own risk!
Espectáculo... 😍👌
Arte & Engenho elevado ao expoente máximo 💪😉
Parabéns e obrigado por estas partilhas
Pretty, EXCEPT: You just doubled the exhaust heat problem inside that compartment, plus it's too close to the heads.How do you plan to cool it?
The exhaust will be ceramic coated. And will have enough ducting to cool it
Jordan instead of having them out the back I think three out each side behind the back wheels on an angle
That would be more of an airplane thing
Just my thinking, your doing great 👍
Do you think the lower pipes went to the opposite side to try and keep all the pipes the same length as the two top pipes
Tuned length maybe
I think you are so skilled and that exhaust is so beautiful. It’s artistry at its best. How are you going to heat the Volkswagen? Could you just put a fan sucking air right out of the engine compartment maybe it’s gonna be pretty hot with all the exhaust in there?
Electric heater/air con unit
Hi, when you said you were going to make the pipes like old aircraft exhaust, I thought the pipes will come out from the sides of the van, like over dish ingrave into the body and pipes come out rest in the dish.
Did you ever think about sliding some beveled washers inside some of the straight sections to kind of make it like a sound suppressor like a silencer and a gun?
It will have removable mufflers
exhaust looks trick
....😳...no kidding....😝
I know that you can, but I question why? The engine was designed to run with three exhaust pipes, probably to run into a common collider/ heat exchange/ muffler unit. The idea of running an aircraft engine in an automobile is a recurring theme in custom cars, I can see the novelty of that. But hanging feet of “extra “ pipes I can’t grasp. And the torque of the engine will be trying to reposition the pipes, allowing everything to place undesired pressure on the joints. I figure that you are the designer and have a great answer for this misunderstanding soul?
Mr. Bennett? You here? I am not trying to be critical, just trying to understand your thoughts.
You’re gonna port match the exhaust Flange to the engine, right, so you have a smooth flow, maybe polish the exhaust port?
Port matching is not needed. The flange is almost exactly the size
It will be loud.
Header tube lengths seem to be off by what trig table predicted.
will a split in exhaust restrict or "un" restrict exhaust..maybe too lil back pressure just curious..cool ass idea though
You doubled your exhaust capacity by making six pipes, so you could reduce it with those beveled washers and it wouldn’t really hurt your horsepower any.
👍😎👍
Hi Jordan, very nice motor, I like it. What do you think how adjust the valves? The exhaust-pipes seems to be a problem. As well the heat in the engine-compartment will be very high by running the motor.. Is there a fan for cooling the cylinders in future or a oil-cooler to bring down the temp.
JORDAN,
That's a pretty high powered helper you've got there.
When laying out something big, which one of you holds the dumb edge of the tape measure? 😜😜😜😜😜😜😜😜😜😜😜😜😜😜
Those pipes are really sexy.
Hahah it’s usually me haha
@@bennettscustomsco I guess you caught my mistake. I meant the dumb END of the tape measure. That was always my job wiht my Dad, now it's my job with my son!
Gunna turn out sweet! Is the plan to run 1 pipe from each cylinder to each side? That would be more balanced and sound the best.
That's the plan!
👍🏼👍🏼
How do these motors cool? No kind of cooling fan on them?
>>No kind of cooling fan on them?
@@frankschwartz7405 I've only ever seen these fitted to Buggies, where there's a lot more airflow. I had an idea the makers were selling them for automotive use as a way to test reliability for aircraft.
Water cooled.
hey its all cool.....till your stuck in traffic
It’s water cooled..
🇨🇦👍
38:00 Dead Poets Society, a barbaric yawp.
Pity you and Karl are on the wrong side of Australia
Pity they're on the wrong side of the planet, but we're happy to share our Canadians with you! ❤ 🇨🇦
I think they're in one of the nicest towns on the planet!
Y are hare and forbes sending stuff to an american channel?
Why**
on fire!!!!