The Power of a One Step - Replay Live on 2022 04 14
Vložit
- čas přidán 13. 04. 2022
- You've all been asking, where’s Mike and Yancy?
Guess what! They’re BACK!
LIVE Detailing Classes hosted by Mike Phillips and Yancy Martinez have returned. In this first episode Mike and Yancy will be sharing the POWER of two GREAT one step polishes (AIO’s) - 3D SPEED and 3D 505 Correction Glaze!
__________________________________________________________
Shop Products shown
SPEED - 3dproducts.com/collections/co...
505 - 3dproducts.com/collections/co...
__________________________________________________________
Don't forget to Follow, Like, Share, Subscribe and be sure to click the bell to get notified!
** Follow 3D Car Care **
3D Facebook - / 3dproducts
Instagram - / 3dcarcare
CZcams - / 3dcarcare
Detailing Society Group - / 3dcarcare
** Follow Mike Phillips **
Facebook - / mikephillips3d
Instagram - / mikephillips3d
** Follow Yancy Martinez **
Facebook - / michealangelo1
Instagram - / michealangelo
#3dcarcare #3dcarcareproducts #cardetailingproducts #detailersofinstagram #autodetailing - Auta a dopravní prostředky
I have been detailing more years then I car to remember, however I always look forward to Mike's no- nonsense approach. 👍🇨🇦
Detailing isn't that complicated and Mike makes it easy to understand how to do it. Thanks for watching - Yancy
Mike Phillips is the man! Glad he’s with 3D
The man, the myth, the machine! lol - Yancy
This is EXACTLY what I needed to understand the concept of each polishing approach-I’m soooo glad I came across the video! You guys rock!!!!
Thank you so much Mike!!
Very welcome! That is why we do these videos to help you all out. Thanks for watching - Yancy
at last! Mike and Yancy...thanks god you are back! best educational duo on polishing, all over the world! please guys make a video on defects that need wetsanding first. it would be very interesting. thank you
On it! - Yancy
Great information Mike thank you!!
Glad it was helpful! - Yancy
I don't understand the language, but I do understand the concepts that Jancy and Mike convey. I hope the subtitles are available. Great video, lots of information.
Thank you, greetings from Chile
Captions should be generated by CZcams and will find out if it can be translated. Thanks for watching - Yancy
Bead it up, great to see you guys are back
Just did that on our last LIVE feed - Thanks for tuning in - Yancy
if I add a rubbing compound a polishing compound and a wax together and use it do I still need to wax after and will that work as a all in one
Great info thank you. Before starting the project, would the amount of clear coat be in question, given the age and condition of the clear coat?
Excellent video.
I normally used a microfiber pad with a one step polish and I end up doing a 2 or 3 step polish.
Thanks for watching - Yancy
I plan on doing a 1 step on my 2015 Black mustang.. I have 3dOne and just ordered the light purple 3d Pad. I know you said about doing the whole car then wipe off, but would I be able to do that with the 3done Product? Very informative video by the way!!!
Yes same easy wipe off, thanks for watching - Yancy
I tried to watch it live, but life happens. It's 0051=12:51 am
Thanks Mike and Yancy and of course 3D
That is what the replay is for - next time hopefully you can make it. Thanks for watching - Yancy
a question. What is the name of the polisher that you used in minute 20? Please, I would really appreciate it. Thank you
Will the aio take out 300 grit sanding marks?
Hi from South Australia
Awesome job
Thanks for the visit - Yancy
The light purple 3D pad is about as course as an orange Lake Country? I don’t have any history with 3D pads. I used 3D speed with a orange in one application and white Lake Country, wondering if the light purple pad would have been good for both. Testimonial, I used 3D Speed, with a top coat of Poxy machine applied with a black LC pad. Let is cure overnight and put a layer of 3D Bead It Up. Looked like ceramic when I was done! Used 3D One on another car, great product!
do you have distributors for 3D products in nigetia
One step is my fav type of enhancing the car
Me too - get in and get out - rather be driving than polishing! - Yancy
Hi i just recently purchased 3D1 and Aca 520 how would that compare to the 3d speed thanks
ONE is exactly the same as SPEED except it leaves no protection behind. And 520 is a polish that again leaves no protection behind. I will have Mike post up more in-depth info for you. Thanks for watching - Yancy
@@3DCarCare ok thanks I should probably finish with 3d poxy great video
3 step is my worst nightmare as a mobile detailer because you can not put the vehicle on a lift outdoors. Bending down and balling up into crazy positions for each panel is the back killer. Thank god for 1 step. How do you sign up and pay for classes?
You can find info about the classes here - 3dproducts.com/collections/detailing-classes - Yancy
I have become loyal to 3D. I’ve never felt, with their product line or their marketing, that I am being sold snake oil. Their products simply perform every time. Plus, made in USA. 🇺🇸
Thanks for that great comment. Hence the reason why Mike and I are here, truly believe in the products and they just work. Results speak for themselves. Thanks for watching - Yancy
fantastic news
Thanks for watching - Yancy
I watch you live, great content. Can I use one step in direct sunlight?
Yes you can! But I would wipe off in sections instead of doing the entire car then wiping off like Mike said in the video. Thanks for watching - Yancy
I was wondering . I am a diy what is better da or rotary
DA
DA - not as much power as a rotary but a lot safer to begin on. - Yancy
👍👍👍
Do you still have on site classes?
Will be getting back to the live classes before too long, on a few big projects right now and we have our classes that we hold here in Florida still. - Yancy. Link to classes - 3dproducts.com/collections/detailing-classes-2022
👍👍👍👍👍👍👍👍👍
LOL take it you liked it - Thanks for tuning in - Yancy
Top
Hello
Bead It Up
Thanks for your input and watching - Yancy
Bead it Up
Noted! - Yancy
dear 3D, i dont know what you are paying these guys but triple their salary so you can keep them for the rest of their career. If you lose the legendary Mike nobody will remember the name 3D and you know why
LOL, now that would be nice for sure, always could use more money lol! We enjoy working here and there are many great things coming to the 3D universe. Stay tuned! Thanks for watching - Yancy
get rid of the tech guy, very annoying, mike however is awesome and very patient