The chicken stick in your PM bag has a slot on the tip that fits inside of a receptacle. The chicken stick should only light on the smaller slot. If you want to check for proper wiring just put the meter on AC Volts on its highest setting. Stick your leads in the slots on the receptacle and check the voltage. Then move the lead from the larger slot to the ground and you should have the same reading. If you have no voltage when you move from the larger slot to ground you have either no ground or hot and neutral are reversed. Put the lead back in the larger slot and move the lead from the smaller slot to ground. If you get 120v the receptacle is wired backwards. If you still get nothing there is no ground. If you are suspicious about the wiring you should be suspicious about the voltage as well. Remember neutral and ground are tied together at the service. So reading from neutral or ground to hot should be the same. Fluke leads are actually slotted to do this. Now you checking like an electrician and don't need that outlet tester.
All I can say bro is u seem so damm cool, the Rockies thing going on and the part u mentioned about your wife at the hair salon haha . Life is good man . Ur so chill . Keep up more great videos bro . I wish I was as skilled as you . I'm only starting out right now on installs!!!! Do you have season tickets for the Rockies? I live in Detroit Michigan so I'm a tigers fan but I love the Rockies too, there my second favorite. Take care brother
Subscribed because we have alot in common it seems. Since you like flashlights check out the harbor freight braun slim bar folding light. For $20 they beat all my tube lights. Plus its rechargeable
Nice set up but yeah I’ll agree with some of the guys here; some redundancy going on there. You could shed a couple pounds imo. Anyway, dude, you should check out Olights! I’m a flashlight GEEK. Had many Fenix’s and loved em. This Xmas I got an Olight and I’m devoted now. I wear a had ALWAYS at work. This light clips on a cap has a magnet and at night i charge it next to my phone so can save on batts. Check outta review on it if your up for a new light. Here’s the point: no having to keep up with a headlamp and it’s always clipped in your pocket so you always have it. Just my opinion. Good vid👍🏻 Olight S1R-Baton ll
Try out the snap on adjustable wrenches (basically re branded bahco) but they have teeth to prevent any slippage. I will never use another crescent again.
Conservative America do you have knipex linemans? I’m trying to decide if i should buy some or not. I have Klein but have heard great things about the knipex.
I just bought the knipex linesman and I love them. I had the kleins for 4 years and I had beat up the cutting edges to the point of being unusable. I tried the knipex dykes after having quality issues with the klein and got the linesman about 2 weeks ago. They're fantastic quality and I love how there's no break-in period unlike my klein. If you're thinking about it, I'd go ahead and grab a pair. You'll love them!
Those adjustable spanners are made in Spain. I know I would rather something were made in Japan by Japanese engineers than in Spain by Spanish engineers. I've lived in both countries, trust me.
I understand the Chinese tool aversion, but fear made in Japan is far superior to most tosh made in Europe outside of Germany. LOL. Try KTC. It is very good stuff.
I live in continental europe. And I gotta tell you: tools made in japan are generally better quaity than tools made in italy. there is a massive difference between china and japan.
And the winner for the most heavy tool bag is...
Nice Tools bro,Nice bag.
Thank you for taking the time to show us new guys you tool bags. Helps me get a idea of what to start get a little of as i go.
Awesome setup sir... thanks for the bag and tool info... always great to see how other technicians set up their tools and bags...👍👍👍
Great video... been in this field for 39 years, nice set up.
Good video, thanks. I use a backpack and a MC too, cool to see another mechanic’s tool load.
Dude, I love that Fenix MC11 flashlight too. I clip it onto my hat all the time
Dang carrying the whole shop lol
Best load out of this bag and really nice tools respect
Like the video. Am always into Quality tools, good review and nice set up.
Quality tools man. I'm a Streamlight man myself. I've got 2 Strions and a Stylus Pro for back up haha.
That light in the tools bag is a great idea
I love your tools and ure veto pro I do Apt maintenance and I love knipex 2
Awesome video and tools. I’m a tool but myself. Go cubs!
I like those bags. Good video
Good job .... From Kim The Cajun Goldwing Rider. 👍
The chicken stick in your PM bag has a slot on the tip that fits inside of a receptacle. The chicken stick should only light on the smaller slot.
If you want to check for proper wiring just put the meter on AC Volts on its highest setting. Stick your leads in the slots on the receptacle and check the voltage. Then move the lead from the larger slot to the ground and you should have the same reading. If you have no voltage when you move from the larger slot to ground you have either no ground or hot and neutral are reversed. Put the lead back in the larger slot and move the lead from the smaller slot to ground. If you get 120v the receptacle is wired backwards. If you still get nothing there is no ground.
If you are suspicious about the wiring you should be suspicious about the voltage as well.
Remember neutral and ground are tied together at the service. So reading from neutral or ground to hot should be the same.
Fluke leads are actually slotted to do this.
Now you checking like an electrician and don't need that outlet tester.
7:20 I have that little needle nose as well. Great tool!!
All I can say bro is u seem so damm cool, the Rockies thing going on and the part u mentioned about your wife at the hair salon haha . Life is good man . Ur so chill . Keep up more great videos bro . I wish I was as skilled as you . I'm only starting out right now on installs!!!! Do you have season tickets for the Rockies? I live in Detroit Michigan so I'm a tigers fan but I love the Rockies too, there my second favorite. Take care brother
Yeah I have the same Milwaukee flashlight and it bugs the hell out of me that the magnet is not included....ended up fabricating my own
Hey man. So far the best video showing how much stuff you can fit in that bag. Thanks!!!
Luis Romero I agree
That's for sure best load out of this bag
I have one the same tools back but I don't like it is to heavy! I believe your main packet has over 40 pound. Good video brother.
Knipex wrench the best quality and strong tool👏
Great video.
Subscribed because we have alot in common it seems. Since you like flashlights check out the harbor freight braun slim bar folding light. For $20 they beat all my tube lights. Plus its rechargeable
Your set up is so similar to mine
Minus the knipex
If you can find online get Milwaukee fastback 2 keeps extra blades also but flips and is solid
Wish my tools would stay like new
Nice set up but yeah I’ll agree with some of the guys here; some redundancy going on there. You could shed a couple pounds imo.
Anyway, dude, you should check out Olights!
I’m a flashlight GEEK.
Had many Fenix’s and loved em.
This Xmas I got an Olight and I’m devoted now.
I wear a had ALWAYS at work.
This light clips on a cap has a magnet and at night i charge it next to my phone so can save on batts. Check outta review on it if your up for a new light.
Here’s the point: no having to keep up with a headlamp and it’s always clipped in your pocket so you always have it.
Just my opinion.
Good vid👍🏻
Olight S1R-Baton ll
When I heard you say your into flashlights I have to recommend Zebralight, check them out.
When u coming out with another video bro.....
Nice bag 👌👌👌
Almost like my bag for commercial HVAC but I love how you called them K nipex lol k is silent
Not in Germany it isn't.
Try out the snap on adjustable wrenches (basically re branded bahco) but they have teeth to prevent any slippage. I will never use another crescent again.
I will never use another adjustable wrench instead I use Knipes pliers wrench.
I love my knipex!
Conservative America do you have knipex linemans? I’m trying to decide if i should buy some or not. I have Klein but have heard great things about the knipex.
great review
Like the video! I like a lot of the same tools. Going to get me some insulated screwdrivers I think now.
how much does your back pack weights ?
Nice bag honestly I prefer Chanel locks over the knipex just don’t think they bite down like the Chanel lock brand and Chanel lock is a lot cheaper
Your tool bag is just like mine except mine is all Klein
Those channel locks are great... however, I prefer Japanese tools over Italian any day
awesome
I need that small bag were you get it
Would you choose Klein or knipex linemans? I have Klein and I’m trying to decide if i should get the knipex ones
I just bought the knipex linesman and I love them. I had the kleins for 4 years and I had beat up the cutting edges to the point of being unusable. I tried the knipex dykes after having quality issues with the klein and got the linesman about 2 weeks ago. They're fantastic quality and I love how there's no break-in period unlike my klein.
If you're thinking about it, I'd go ahead and grab a pair. You'll love them!
Go Klein buddy
does your company pay for your tools or you pay out of pocket ?
Small diagnostics bag? That’s a full size bag!
Those adjustable spanners are made in Spain. I know I would rather something were made in Japan by Japanese engineers than in Spain by Spanish engineers. I've lived in both countries, trust me.
Is this your own business? If not.....what does your employer supply???
I understand the Chinese tool aversion, but fear made in Japan is far superior to most tosh made in Europe outside of Germany. LOL. Try KTC. It is very good stuff.
To many tools bro, overkill
tools never used ?
I live in continental europe.
And I gotta tell you: tools made in japan are generally better quaity than tools made in italy.
there is a massive difference between china and japan.
The Klein channnel kicks are made by nws
Locks sorry
Doesn’t want made in China tools, buys Milwaukee 😂
To be fair most all small power tools are made in China. Not much choice.
Japan made tools got quality to em, just China is 50/50
That bag is so fuckin weighed down
lol. 45 lbs. I didn't see the whole video when I comment. sorry
Lee Valley carries cup and magnet sets. www.leevalley.com/en/wood/page.aspx?p=58750&cat=1,42363,42348
Its Klein....not Klein’s
Your CHANNEL LOCK Code Blue are Made In Spain....! FYI
Do you use your tools bro!! You probably work in the office or something,.....there is no way there so clean.
Sidewayz Xrunner the guy that works in the office but has all the top of the line shit but never uses it
Too much
Most inefficient tool bag I've ever seen. All brand new tools too. Must be new! The longer you're in the trade, the smaller your bag gets.
Na, just a preferance thing. To each his own.
Although i would never carry that beast on my back. I like my Tech-MC.