This was helpful and I got the info on the shell plate tightening info I needed but my 650 must be screwed up. Something binds up in the priming system when indexing. I just got this thing and I hope I can make it work.
Do you need the alignment tool or you have to align the head and the primary feeder and everything will be OK. You also might have the rotating black pipe tightened too much you might have to loosen that a little bit.
Verry Verry good. I’ve done it several times and yet I always learn something new. Thank you😅
More detailed vid and info about how to replace the indexer spring may help, since that's the most difficult phase. Thank you
Thank you for this video.
Just what I needed!
Dillon customer service is A1
This was helpful and I got the info on the shell plate tightening info I needed but my 650 must be screwed up. Something binds up in the priming system when indexing. I just got this thing and I hope I can make it work.
You forgot to readjust the powder drop die...but that's ok it was still a great video.
Do you need the alignment tool or you have to align the head and the primary feeder and everything will be OK. You also might have the rotating black pipe tightened too much you might have to loosen that a little bit.
Which direction does the pawl go?
What is the part number of the piece you use to center the machine with the dies?