BMW G650gs F650gs Fix 4 common Fuel Pump Problems

Stand By For Revised Video. www.euromotoelectrics.com/pro... is source for rubber mounts: If you repair or replace the Fuel Pump or Reserve Light Float Switch in your BMW 650 Single, you will run into these 4 problems. 1. If the rubber vibration isolators that hold your fuel pump housing together are Toasted Unobtanium... the you will find my "elegant" 50 cent fix here. 2. If your fuel reserve light is always on or won't work, you will find out how to test and fix it here. 3. if you don't know how to remove the lock ring to get at your fuel pump..or 4. seal the tank while you work on internals... it's here too.
Please like and subscribe. Thanks for watching.

[@rickmo970]

Thank you, this is very well done and very good REAL world information!
;-]

[@captlarry-3525]

Thank you...

[@tnt4563]

5:08 is it .5" ID or OD fuel line you're using? Thanks for the video.

[@captlarry-3525]

which fuel line ? internal or external. it is metric size... stock bmw...ask them.

[@tnt4563]

Thanks for your response, I was asking what size fuel line you're using for the rubber isolation damper work around.

[@COOLCABMAN]

Plz can u share the link for buying the fuel pump kit.

[@captlarry-3525]

tomorrow.

[@captlarry-3525]

EuroMotorElectrics.com
www.euromotoelectrics.com/category-s/1805.htm?searching=Y&sort=7&cat=1805&show=60&page=1

[@eyemallears2647]

@@captlarry-3525I see the little rubber spacers on that page too!!

[@nathansmith7153]

The white cap to the float is a snap in. I made a V cut in the rim and got it out so I could replace all the wire.

[@captlarry-3525]

That's a good thing to know ! Thanks Nathan.

[@nathansmith7153]

@@captlarry-3525 The wire connections are solderable underneath the crud that built up. Getting the right connecting hose seems to be a problem. Mine is 9mm at each end and about 220mm.