How would you determine which wafers are at top and bottom or are they in order like on the lishi for example I picked a 2019 f 250 and 10 was at the bottom and 9 was at the top. I'm guessing there is no chart or website that determines this information.
I’ve ran into some that have two on bottom then two on top and some that just alternate. The way to tell is insert tool with no tension and just feel where they are
Usually when I’m having hard time with lishi hu101 and can’t pick it I pay third party to decode but for ford high security 2015 and up all 3 companies I’m dealing with cannot decode the lock. Is there another way? Is there a code on the door lock or any other company that can actually decode them Thanks
Having trouble with hu101, I am getting to the point where all of them are springing and can’t get any clicks and lock won’t open. Any tricks when that happens? Or do I just apply to much pressure?
Excellent video. I have been working to get more consistent with the HU101 pick and this is the best video on CZcams by far. Much appreciated.
glad it helped it! and thank you so much for the donation!
Is the hu101 the most difficult? Iv heard theirs a Manuel with best sequences to save doing numbers multiple time is this Correct ? Great video man 👍
@@richardmathers7238what’s the manual called?
Great explanation. The HU101 has kicked my ass. I watched this today, and had one picked in a few minutes.
Awesome! glad it helped!
I never comment on CZcams but this was extremely helpful
Glad it helped!
Lishi master lol. Supper interesting buddy enjoy watching the videos and actually learning something from. Each video .thanks for sharing. 😎
SUNCOAST PICKER lol thanks man
Youre more of a hero than you know!!! Thank you sir
Lol
Thanks
Dope thanks for the tips
thanks for checking it out!
Very nicely done Mate
《THUMPER》 Lock Picking thanks man
Gonna try holding the middle. I think sometimes I already do but gonna make it a habit. Actually prefer one arm lishi
if you have the choice of single or twin lifter always go with the twin. they're generally more accurate. examples are HU66 and HU92
@@BoredLockpicker
Thanks for the tip, new to lishi. Always would pick the ignition on gm or do the door. Tired of taking crap apart.
Muito obrigado
you're welcome
THANKS
You’re welcome
How would you determine which wafers are at top and bottom or are they in order like on the lishi for example I picked a 2019 f 250 and 10 was at the bottom and 9 was at the top. I'm guessing there is no chart or website that determines this information.
I’ve ran into some that have two on bottom then two on top and some that just alternate. The way to tell is insert tool with no tension and just feel where they are
Usually when I’m having hard time with lishi hu101 and can’t pick it I pay third party to decode but for ford high security 2015 and up all 3 companies I’m dealing with cannot decode the lock. Is there another way? Is there a code on the door lock or any other company that can actually decode them
Thanks
Nope. Pick it and decode or take the lock apart
Does it matter that the letters & numbers are upside down, is the lock 🔒 you were picking & decoding upside down?
It’s just a like a key. No upside down or right side up
Having trouble with hu101, I am getting to the point where all of them are springing and can’t get any clicks and lock won’t open. Any tricks when that happens? Or do I just apply to much pressure?
If they’re all springy that means you overset something.
What if u get NO binding or NO springy, or it only binds on every other number?
It’s like it’s dead on Almost every number. No binding or springy
Lubricate it.
Can you please tell me
Where do you buy all this tool
And is car is different is different tool to use..???
Thanks again
Every Keyway has its own Lishi. Google original Lishi vendors. You’ll find the list of places you can purchase them.
You can buy it from UHS hardware
Amazon
Where’d you get the vice holding the lock from?
Google Lishi vise
@@BoredLockpicker thanks!
Brasileiro love key
thank you
Does the lishi you are using in this video work on all fords example 03 f150 ?
No. 03 would be FO38
Cuantas hu66 hay..how many hu66..v1 v2 v3...how many? I want to buy
jorge gonzález I don’t know. On Facebook there is an original Lishi page. You can contact them
Great video👊spot on info on hu101
Thanks! 👍
I bought a 2008 Camry that had a HU101 inside. Can it work?
i dont understand the question
@@BoredLockpicker I have a Hu101 lock pick. Does it work on the Toyota Camry or do I need a specific lock pick for it.
@@JBiggalo hu101 is high security for Ford and some volvos. Your Camry is TOY43AT
@@BoredLockpicker thanks
@@JBiggalo you’re welcome
No one shows a key being made from the key cut numbers the Lishi tools indicate. That should tell you something. Their scales aren't accurate.
Strange….ive made several videos doing just that. Click the bell I just filmed another one hoping to get it posted tonight.