Ciro FANG Lower Fairing LED Lights FULL INSTALL
Vložit
- čas přidán 20. 08. 2024
- GET YOURS HERE - shrsl.com/3oyfp
In this video, I am going to walk you through the easy process of installing the NEW Ciro FANG Lower Fairing LED Lights. This install is on the street glide but the road glide install is just as easy.
Plug-n-Play
Bright white running light
Amber turn signals
Everlight LEDs
Polycarbonate clear lens
Available with chrome or black housings
Improves side visibility
180° side-to-side light pattern
No restriction to the airflow
LED limited lifetime warranty
As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
🔵My Gear - Sony Handycam - amzn.to/3mhAIyv
GO Pro Hero 7 black x 2 - amzn.to/3p9fxQK
Go Pro Helmet Mic - amzn.to/3e6vRM8
Packtalk Bold Duo Helmet Coms - amzn.to/3e4z5jd
Bell SRT Helmets - amzn.to/3GWdpBZ
Samson Go Mic - amzn.to/3Fale6Q
Video Lights - amzn.to/3shXUAk
Tripod - amzn.to/3uyvTnO
Mini Tripod - amzn.to/3snWtjR
Go Pro Gimbal - amzn.to/3yHw69H
Go Pro Mic - amzn.to/33MzPYp
Go Pro Mic Adapter - amzn.to/3p69c8N
Go Pro - Filters - amzn.to/33HS7dc
GoPro - Case - amzn.to/3p8CKCB
GoPro Stabilizer Gimbal - amzn.to/3tLk6Do
Camera Light - amzn.to/3NuVmao
Camera Mic - amzn.to/3IRQ7Oe
#sikbaggers
🔴GET SOCIALISTIC
🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
🔗Instagram - bit.ly/2HwBZge
🔗My LINKTREE - linktr.ee/sikbaggers
🎵All Music Licensed Through www.epidemicso...
🚩The video content is available for informational and educational purposes only. Steven Housden, SIK Baggers does not make any representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the video content. Steven Housden, SIK Baggers does not warrant the performance, effectiveness, or applicability of any sites listed or linked to in any video content. The information contained in the multimedia content (“Video Content”) posted represents the views and opinions of the original creators of such Video Content and does not necessarily represent the views or opinions of the Company. The mere appearance of Video Content on the Site does not constitute an endorsement by the Company or its affiliates of such Video Content.
Steven Housden/ SIK Baggers assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user.
Love all My Ciro 3D lights on the Blue Mule... and My ASR SEAT (had an issue with the seat Backrest But thatvwas easily fixed) 2017 STREET GLIDE SPECIAL.... Turned ULTRA CLASSIC
yeah love all of our ciro lights...and these did not disappoint!
@@sikbaggers I don't have lowers here in Central Fl its WAYYYYY Too hot to block the air or rain from your legs ! GREAT JOB out in Sturgis too BTW
Thanks for the video. As a “visual learner”, I always look for your videos before attempting an install. 👍
GREAT INSTRUCTION VIDEO Steve as normal!!! Something that work 21:34 s for me with small screws since I've got big hands and the coordination God gave a 3-legged pig on ice. I put a small dime shaped magnet on the small tool used to drive the fastener in. Then put the screw/bolt on the tool used to put the fastener in. Works great as long as fastener is metal based. May help you also if you wanted to try it. Appreciate the hell out of your instructional video's and help immensely!!!
Thank you for the tip! And thanks for checking it out!
Ciro makes a great product I bought the bag blades earlier this year and am thoroughly impressed with them !! Great install Steve keep ‘em coming
thank you for checking it out Derek! Love these little lights and super bright too!
I had the kuryakan - light years easier to install by just removing the stock guard and snapping in the lights. Wire just runs up to the turn signal assembly and snaps right in - no drilling, no extensive disassembly. I probably have 1/100 of the skill you do and the whole thing took me 20 minutes to install.
aah I havent had a chance to install the kury versions yet...sounds pretty simple.
Yup, got an LED headlight, led brake indicator out back,indicator up front.And a green pimp ya ride engine/ chassis illumination kit. You can see my breakout from a mile away at night!
That's awesome!
Cool looking product. Thanks for the walk through Steve.
thank you for checking it out paul!
I couldn't wait to get these. They weren't available at Laconia so I had to wait till Sturgis. I love them
Very cool..these guys are great!
Awesome video, as always, awesome product! These are gonna look killer on my Ultra! Thanks Brother Steve!!
Yes sir..glad to help!
Great looking upgrade.
thanks for checking it out!!
Thanks for the video Steve! I bought these during the launch... can't wait to add them!
Nice!! sorry for the late reply still playing catch up from Sturgis trip
I actually have the custom dynamics which are awesome i saw mine out at phantom harley Davidson on a street glide
nice man...those are pretty nice too...just too big for me
Those lights look sweet!!! Another great video.
thank you for checking it out Jamey! sorry for the late reply still playing catch up from Sturgis trip
Those things look amazing.... love the way you explain things...if you see the opportunity I'd love to see you put a 14 up fairing on a 13 down road glide...thx much
sorry for the late reply still playing catch up from Sturgis trip...but that fairing swap is super pricey! If I ever have someone get everything to to do it ill try to get a video
Always great videos. Do they have these in a black trim
Very cool looking... Wonder how they would look with the advandblack lower fairing lights installed as well?
Like it, got to get some.
awesome man....glad the video helped!
Hey Steve, I have a road king special with Advanblack lowers on. Is it possible to make this configuration work on my road king special? I also know Advanblack makes the light to go on the lowers as well and I was curious about those if it was possible to make those work without a lot of splicing. Any help or advice would be appreciated.
I run a 19 RKS also with advanblack lowers. But fortunately last year I also installed the street glide style Aux lights bracket kit. That also move your turn signals from the handlebars down to below the Aux lights. So they sit where the turn signals are on now on Steve's bike. Will make this setup simple plug and play.
Thanks dude
very welcome!
I'm looking to buy a Batwing fairing to go on 2005 Harley
that despnmds on what "harley" you have ...but there are several companies that do bat wing fairings for bikes
Wish they had a light that mounts to the engine guards
they do! Check out my video czcams.com/video/Yh6w3c6yDv4/video.html
@@sikbaggers No something that mounts on the bar and is a LED light / Turning signals
Is there any way I can tie these into a 2008 road king?
Those are badfugginass!
yes sir!! totally impressed with them!
I just watched this video the second time and thinking about getting the fang lights for the lowers. My question is what is the difference in installation because I have a 17 ultra classic. Second question what did you do with the fang lights when you did the color change?
Is the reason they don't fit the 13 down because of the plug or are the lowers shaped differently? I think it would be nice if they shipped them with the connector unpinned...it would make a smaller hole to drill
too many issues with people out there trying to pin the connectors..the hole is covered up by the light and two things limiting it to 14 up, the shape fop the lower, yes although youc an run 14 up lowers on a 13 down...its the same crash bar...and the wiring itself ...they are led and 13 down need load capacitors to be installed for turn signals
I followed your instructions for my Ultra Limited and got it done despite the radiator and fans. I just wish you would have shown a clear path for wire management. My wires are not hidden very well. Is this correct or am I missing something?
Sorry i wasnt clear on the path...all fairing lights are run outside of the where the rear cap goes on and down the engine guard and then up into the fairing from there. There is really no good way to do it...you will see wire at some point during that path.
How well does the sticky tape on the back of the lights stand up over time?
Excellent if its applied correctly...you should have a hard time getting it off if you want to remove them.
@SIK Baggers --- Are you able to depin the plug so you just have to drill a hole small enough for the wires?
sorry for the late reply been down with the flu...but yes...as long as your comfortable de pinning it and not breaking any pins...I dont think they will warranty it if you do. They are tiny
Grasping at straws here, but would this go on a 2021 Indian Roadmaster?
They will not fit the indian lowers.
On a 2019 CVO Street glide with stock lowers is the rear cap held with a 10mm bolt also. I don’t see one?
I havent had the chance to take the newer ones off so im not sure..sorry.
@@sikbaggers thanks for the quick response 🙏🏽
I found the nut that holds on the cap was a squared off shape and threw me for a loop. Lol I got it now thanks for the confidence to tackle this mission. They’re on bike now looking sic 🙏🏽🙏🏽🙏🏽🙏🏽
I’m interested in this but says for 14 and up Harley. I have a 13 CVO Ultra, do you have these for my year? Didn’t see on website. Any reason why this would not work for mine? Are the plugs different?
Also, the filler lights, same thing. Thanks, love the videos!
Yeah they wont work on 13 and older bikes due to the plug and that they are LED, you would need load resistors to make them work.
Hey Steve, what is that thing above your horn that had the 3 horizontal holes?
Is that part of the horn mounting bracket?
Looks to me like its probably switches for his air suspension
@@bmacias
I'll accept that answer.
yes sir it is the air ride and center stand switch made by AF Kustoms we have a full video on the install.
@@sikbaggers
Thanks.
I was curious and remembered seeing a part of that video and eventually decided that air ride wasn't for me.
Which brand turn signals are on the front?
They are Ciro also here is the link to my video install czcams.com/video/pVCBtyBhdHI/video.html and these are the parts i have Rear 1157 Style - shrsl.com/1w2wz
Rear 1156 RED Style - shrsl.com/1w2x1
💯👍
What about 2010 touring
im sorry 14 and up
Been thinking about adding these but I have the radiators pin my lower fairing, which I know these will fit, how careful do I need to be during the drilling process not to damage my cooling system?
Doing a water cooled bike, I would use a very small step bit and let it really slow...if you dont have one and just want to use a normal bit, make sure it is sharp..and once again let it really slow..its abs so the bit will eat through really easy. Let it grab and go slow and youll be fine.
Thank-you! Think I’ll give it a shot! Love the videos very informative!!
What about a 2010 touring bike 🏍
14 plus.
I personally believe Harley needs to get back to its roots. American made products! There are so many great vendors out there they could be working with to produce a better quality bike for your money. We all know what those parts are, lights being one of them.
wait... YOU"RE NOT SUPPOSED TO EAT THE GEL PACK?!?! 😲😲
i think ive met a few people that clearly "ate the gel pack" in my days lol
Can the Ciro light cannons be installed on the front crash bar with lower fairings? I have a 2021 RGL.
Yes but they would have to be out on the edges like where your highway pegs would go