Used this two weeks ago and so far no probs. The only grinding i did was a few little spurs on the spoke nipples. 5mins with a dremmel. Iam very pleased.
Yes my rim has the grove. The bike is a F800 GSA and was already fitted with tubeless tyres, When you order the kit its bike specific for your wheel size.
What about when I have a large Excel alu nipples? Which heads protrude about 5 mm off the rim? In the video nipples heads are dubbed - 0:04. Do I have to grind them to put the tape evenly?
Hi, I am from Kolkata, India! I own a Royal Enfield motorcycle with spokes and want to make it a tubeless with this outed but where I could get this kit in India or from other countries through online order? thanks!
There is no bead for the tubeless tire to grip on a tubed rim. So when it goes flat the bead is broken and you go down. Much safer to go with a relaced tubeless rim. Just saying
Flatus Antiquitous No, you're wrong. I'm a sheet metal worker and when you layout on aluminum, unlike galvanized or stainless steel, you always use a pencil or marker and never a scribe as that could lead to fractures or complete breakage.
@Flatus Antiquitous Ignore me, I've only been an Aircraft Engineer for 40-odd years, I obviously don't know what I'm talking about. dspace.lib.cranfield.ac.uk/handle/1826/7895
Could been a lot more informative with a description of what they were doing instead of the annoying music.Why do so many youtube clips have shit music ,is it idleness perhaps .
This can not work as the first green sealing tape was full of wrinkles. It will start to leak sooner or later leaving you stuck on the side of the road far from home.
No doubt Outex is good but it's very costly. So the combination of engine gasket sealant and silicon sealant are cheap and the best.
Used this two weeks ago and so far no probs. The only grinding i did was a few little spurs on the spoke nipples. 5mins with a dremmel. Iam very pleased.
Yes my rim has the grove. The bike is a F800 GSA and was already fitted with tubeless tyres, When you order the kit its bike specific for your wheel size.
Is it still holding up?
I must be the only one that would rather hear background noise or talking than music.
Nope
Or silence
A picture is worth a thousand words.
Speaks for itself.
Chris, I couldn't agree with you more!!! Lol...
That's not music lol.....
It's way better than previous video that i watch
Magnifique tiptop 👍🏼💚
you're oiling up that top patch with your bare hand at 4:01, surgical otherwise. how is this holding up???
What about when I have a large Excel alu nipples? Which heads protrude about 5 mm off the rim? In the video nipples heads are dubbed - 0:04.
Do I have to grind them to put the tape evenly?
Anyone know if the spoke wheels of a 2006 Suzuki DRZ400SM have a safety hump? If that's the case then I can convert them to tubeless
Since you made the change and the ring was ready to use, the tire that puts you back is a tubeless tire? Or a conventional tire?
has to be tubeless
nice music!!!!
So what happens if you have to change a spoke?
Te dan sobrante de cinta para reparaciones de rayos viene en el manual de uso
Hi !
Nice vid dude.
Where did you buy the fixings between the spokes?
Thx for your answer ! ;-)
Je croyais que c'était interdit sur la route, utilisable en cross (OFF-ROAD) seulement ???
what if we pressure wash the rim? water will ruin the tape
Sleek tyres.. spoked rims..which bike tyres are these though :/
You can search "spokebooster"
I had a bad experience after mounting the kit and new tyres, the front one slowly lose pressure, nobody can understand from where it comes
Spray sopy water on the rim.. You'll find it in a sec
Tape name
@hackerszymon
It is much better to grind nipples if extremely protrude them.
@CR125MANIAC
Please search "OUTEX TUBELESS KIT" and you can buy it in the eBay.
Hi, I am from Kolkata, India! I own a Royal Enfield motorcycle with spokes and want to make it a tubeless with this outed but where I could get this kit in India or from other countries through online order?
thanks!
Call Biking Spirit, Bangalore. +91 88610 10111. They’re the Outex dealers.
Can 190/50/17 will fit in 4.50 x17 rim?????
No way
Outex is not available on amazon ? How can I source it in India
Sameer Kasargod - call Biking Spirit in Bangalore, they are the dealers. +91 88610 10111
nice vid man damn that stuff is sticky if you can hold wheel up with it haha where can I buy this and how much
Amazon. Woods wheels of Colorado.
About to switch off when I realised I could just press the Mute button and save myself a headache...Crunging awful music...Why?
THE MUSICK!!! AAAAAAAAH. Good kit though
There is no bead for the tubeless tire to grip on a tubed rim. So when it goes flat the bead is broken and you go down. Much safer to go with a relaced tubeless rim. Just saying
Not true in every case, my bike has tubeless tires on a spoke rim but uses tubes.
A tubeless wheel will go flat much slower than a tubed tyre. More chance of going town from a tube puncture.
Not really a good idea to cut the Tape as shown.
Even a slight score on an Alloy Rim could lead to cracking.
Flatus Antiquitous
No, you're wrong.
I'm a sheet metal worker and when you layout on aluminum, unlike galvanized or stainless steel, you always use a pencil or marker and never a scribe as that could lead to fractures or complete breakage.
@Flatus Antiquitous
Ignore me, I've only been an Aircraft Engineer for 40-odd years, I obviously don't know what I'm talking about.
dspace.lib.cranfield.ac.uk/handle/1826/7895
My god damn spokes are leaking
Could been a lot more informative with a description of what they were doing instead of the annoying music.Why do so many youtube clips have shit music ,is it idleness perhaps .
This can not work as the first green sealing tape was full of wrinkles. It will start to leak sooner or later leaving you stuck on the side of the road far from home.
First
Seems legit.
But the vid of the product you smear on seems like the better route. IMHO
You wont be able to adjust your spokes
@@sallin828 Good point.
Can't watch because of the 'music'
Please lose the horrible music
Name of the tape?