ZOHD Talon 250G setup
Vložit
- čas přidán 3. 06. 2021
- ZOHD Talon 250G assembly and setup including pushrod connections for the correct throws, esc brake and throttle range programming.
Flying weight with 18650 2S - 226g
ZOHD Talon 250 (Banggood) - bit.ly/3wLr9L1
👌🏽Support this channel 👌🏽
This is a fun hobby for me, not a money making venture.
I don't have a Patreon account, and choose the minimum possible advertising option.
However if you would like to support this channel here are some options
►Like, Subscribe & Ding the 🔔 - bit.ly/ANsubscribe
►Buy Me a Coffee - www.buymeacoffee.com/AndrewPN...
►Direct donations to Paypal.Me - paypal.me/apnewton
►Affiliate link - BANGGOOD RC - bit.ly/2R7LMgg
If you use the affiliate link to make a purchase I may receive a commission at no extra cost to you.
👀 No single review will tell the whole story. Be clever, watch other reviews and shop around before making any purchase.
🔎 More information 🔍
► Newton Airlines Uncut - bit.ly/NewtonAirlinesUncut
► Newton Airlines blog - newtonairlines.blogspot.com.au
► Links for my build materials - newtonairlines.blogspot.com/20...
► Andrew Newton CZcams - / andrewnewtonaustralia
► My portal - anewton.net
► My Thingiverse - www.thingiverse.com/andrewrcn...
► iNav Basics and FAQs - newtonairlines.blogspot.com/s...
►My FPV gear - newtonairlines.blogspot.com.a...
►Favourite iNav gear
Matek F405 Wing FCB - bit.ly/2SI3bAv
iNav GPS - bit.ly/2ERre6w
Beitian BN-880 GPS - bit.ly/2K7hdHc
► Depron Armin Wing build - • Depron wing build
► Skyshark P4X spars - www.kitesandfunthings.com/Pro...
► Knauf XPS Hot Wire Foam panels - www.bunnings.com.au/our-range...
► GBC EZLOAD laminating film (May be discontinued) - shop.quadient.com.au/products...
► Alternative 75 micron laminating film (not tried by me) - www.boundtoimpress.com.au/sho...
► Depron and foam board - My 6mm and 3mm depron came from www.tradewarehouse.com.au But from 2020 it seems they no longer sell proper depron. I have not found another supplier yet.
🎥 Video Recording Gear 🎤
In the Field
► Onboard camera Mobius C2 - bit.ly/2RLNLLg and RunCam-2-4K-Edition - bit.ly/2X4CE0y
► Hatcam Firefly 8S 90º with external mic - bit.ly/2DwAP2V
► External Microphone - bit.ly/30SwvDB
#AndrewNewton #ZOHDTalon250G #ESCprogramming
Happy flying! I'm still tuning mine on a weird Radix Li wing I salvaged from another plane...
Perfect!,!!
Fun little plane. Maybe I'll try it. Keep on with your videos, like them alot. Miss being in Australia.
Will do Tom, this channel is my hobby really
Nice idea having the binder of manuals. No chance of them getting lost.
The enlarged photos of Matek boards are most useful too.
do you think that this little plane will fly well with 2s 21700?
1 bit of trivia that has been reported for Kopilot FPV package buyers is that the manuals supplied with the Kopilot Lite stab have the R and E connections for a V-tail reversed to that shown in the Talon 250G manual. If you take an electron microscope to the paper manual included with the Kopilot you'll see it's because the servos are shown reverse mounted to the Talon 250G. Lots of cursing and hair-pulling! ;-)
I have a talon 250g... All the control surfaces work but the rudder works in the same way as the elevator... They both go up or down not left and right... It has some kind of servo 2 into 1 on the rudder
@@simonwood8685 Plug in your Elevator and Rudder servos as stated in the ZOHD Talon259G manual NOT the Kopilot Lite manual. As stated above they are different! Set your 3-position switch on channel 5 and switch to +100 (Stabilize) position. Place your radio ASIDE until you have set the selector board to V-tail plane and have the Elevator - THAT is the tail surface plugged into the Elevator Kopilot output! - (don't worry about the Rudder yet!) and Ailerons responding in the correct directions as you roll and pitch the plane in your hands.
THEN pick up the radio and check which way they drive each surface and reverse any that require it in the radio.
DO NOT fool around with the radio stick directions BEFORE you have the stab directions correct! Reversing the stab pots also reverses the radio stick directions. Reversing the radio stick directions has NO EFFECT on the stab pot directions!
@@theoztreecrasher2647 thanks for your quick reply really appreciated... I'll have another look at it later.... Been doing my head in lol.... Thanks again... On the two tail servos it has what looks like a servo reverser the two leads from both servos go into it... And that is plugged into the elevator channel on the kopilot.. Nothing is plugged into the rudder channel... I bought it like this.. The previous owner had a flysky receiver... Using pwm... I took that out and swapped it for a crossfire nano... Running s bus... Do I need this reverser thing or do I just plug each tail servo... Into. Elevator and rudder separately
Got it working now it was exactly what you said it was. Thanks
@@simonwood8685 Glad to hear it! Also thanks for the confirmation. We often see many folks here who ask for help with a problem but who don't have the reciprocal concern for others to post what they found was the cure. Kudos mate! I hope you enjoy your toy. 👍 😊
Didn't seem much weight allowance left for fpv gear Andrew .?...🤔🤔🤔🇬🇧
❤😍👍
Hi.. if i buy this talon 250g. Can i use dji vista on it? Because now all i have just dji remote controller for my fpv quad. I will need a new fc for it, but is that it? Dji vista unit + fc is enough? Or do i need to buy another parts?
Cant help sorry. Have to ask someone with the control unit on a plane.
Hi M. Newton, I bought a Nano Talon with a kopilot and using a fs-I6x as a controller. I’M having a problem with the control, rudder and elevator, they are wrong on the control and I’m trying everything and it doesn’t work, so if you have a idea, please let me know, thank you and have a nice day.
Insufficient information
Hi M. Newton, I was able to inverse the rudder and the elevator with the kopilot adjustment controller. I remember one of your video 👍. Thank you and have a nice day
Hey Andrew i got one of these have you maidened yet?
Yes, video coming soon. It's a wiggly but fun little talon
Like your battery bank stuck to your servo tester Andrew. Li-Fes/AAAs?
4 x AAA receiver pack from HobbyKing
@@AndrewNewton Thanks mate. Hope all's well with you and yours in the current evolving madness.
Hey Andrew, r u going to ditch YT like AM Rc and move to Vimeo?
N, the changes make no difference to my channel
Think I'll pass on this one....the central brace seems to be quite vulnerable from other videos I have seen...buggered if I am going to buy a 3d printer to rectify the zohd failings.
Pass it. Even my N Talon Evo wing snapped off during launch 🤣