Video není dostupné.
Omlouváme se.
MSA Training in Hindi/NDC/Variable MSA/Core Tools/QDS/ Quality Documents Solution
Vložit
- čas přidán 16. 08. 2024
- Please subscribe the channel and click lick as given below for watching more videos
IATF 16949 Awareness
• IATF 16949/ISO/TS/1st ...
VSA T2 Checklist (Part-1)
• VSA T2 Audit Checklist...
VSA T2 Checklist (Part-2)
• VSA T2 Checklist (Part...
VSA T2 Checklist (Part-3)
• VSA T2 Checklist (Part...
Change Management
• 4 M Change management ...
MARU-A (Safety Parts)
• MARU A/Special Charact...
Types of Audit
• Types of Audit in hind...
*New Control Plan as per IATF 16949:2016
• Control Plan in Hindi/...
APQP - Advance product quality planning
• APQP Training in Hindi...
PPAP- Production Part Approval Process
• PPAP Training in Hindi...
*New FMEA- Failure Mode & Effect Analysis- 1st Edition
• New FMEA(AIAG - VDA)/F...
MSA- Measurement System Analysis
• MSA Training in Hindi/...
SPC-1 Statistical Process Control
• SPC Training in Hindi/...
SPC-2 Statistical Process Control
• SPC Training in Hindi/...
7 QC Tools
• 7 QC tools in hindi/7 ...
If there is any training required in your organization,
please mail us on
isovipinmandal@gmail.com
or
visit us on
www.qualitydoc...
Very simple language are used for presenting MSA......thanks sir for understanding MSA in simple ways..
...
Thank you very much Sir,
Nice teaching way
Very nice. Basic concept of msa is explained in very easy form
Thank you
Lots of thanks 🙏🙏🙏 Sir
Very usefull video
dear sir, very respectful of you - so happy after watching this video. concept are clear about NDC
Great explain... NDC confusion totally cleared.... thank you sir
Most welcome
@@qualitydocumentssolution-q8183 sir, please release attribute MSA
Coming soon
@@qualitydocumentssolution-q8183 thanks sir
Thank you sir plz update attributes variable video
Thanks sir
Dear sir
Explain the alluminum composition effects on casting defects and plz explain good effect and bad effect on casting
Thanks you sir for the information
Nice explanation sir!
Thank you
Thank you sir.... Video is amazing👍🏻...
Can you please provide MSA GRR format.....
Thank you once again sir
Sir please help me to know about gauge capability (cg and cgk) learning
Sir,
We are manufacturer of stearic acid for a tyre company .
We checks all the parameters like iodine value , acid value etc. by chemical titration method then how can we perform MSA.
Aap ki vedio bhut acchi hai sir. Mera ek question hai sir ki appraisers variation or equipment variation kitna hona chaiye ya kitna hota hai
Appraiser & equipment variations criteria not defined in MSA manual but logically it can be defined if equipment variations is greater than AV then the variation present in Equipment and if AV is greater than EV then the variation is present in AV .
But the standard defined on R&R acceptance criteria.
If R&R less than 10% the measurement system acceptable and Measurement system is whole thing you need to understand measurement system.
Sir,can u explain how many trial for MSA standard ???
Sir if we have 4 micrometer, but we mention in the control plan that measurement method by micrometer, in this case can we have to do msa for all micrometer Or any one of them.?
You can do MSA of any one micrometer but The range and least count should be same means equipment should be from same family.
In case the range and LC are differ then you have to do MSA for all measuring equipment
So Informamative session 😊,
Sir may you provide ppt link so that we would download it ?
In MSA Study ,How many Persentage of Part Varriation
sir msa grr value acceptable criteria me meet nahi hota
for forging
Sir yaha msa me Jo format ap gauge RR liye h wo excel me kaise likhete hai ye bataiye
When are you going to upload MSA for attribute data...may I know sir please?
Working on it & coming soon
Sir how to decide reference value in linearity and bias study???
Dear Sir Can you please send me format of Guage Repeatability and reproducibility data collection sheet
Sir msa 3 word ka hindi definition bta dejiya m,s,a, ka matlab
Thank you so much for sharing.... Amazing video...
I have two doubt..
1. While doing GRR study, do we have to inspect on the same location Or in 90°.. especially for bore reading ?
2. Can we have to do MSA on all measuring equipment including CMM? What does about destructive test measurement reading (material yield )?
Thank you in advance
1. You have to measure on different locations but in some case you can measure on same location.
2. If you have defined control method in Control plan the you have to do MSA as per defined measurement & test equipment .
But the Measurement equipment you will select family wise If you have 5 micrometer and its range 0-25 & least count 0.001mm then you can take anyone for MSA study. No need to take all micrometer because the family is same.
Thank you
Can someone explain me NDC calculation with an example:
NDC= 1.41 (PV/R&R).
How to get PV & R&R value
sir, can we Compare Cp, Cpk = Accuracy, precision??
and Bias , linearity and stability Study is mandatory or not..???
It is clearly defined in SPC watch my SPC video 👇
czcams.com/video/nn6qB25pCbw/video.html
Sir 200 Ni
I think 20 banegi
What action need to take if msa fails in case of AP n EV ?? What action need to take if part variation is more than equipment variation and apprisal variation
Action to be based on value of AV or EV....
If AV- check whos value is higher like wise... One of action is Training.. and need to do again MSA.
If ev - check where it showed higher ... Replace, repair..
Sir will add some more into it...
First you have to See that if R&R is not acceptable then you need to take action now you need to analyse (through cause and effect analysis) that what is the actual cause of failure of R&R (Appraiser, Equipment, Environment, Method etc) . If you find actual cause then you need to take action on that.
What is the Difference between Pareto and histogram
Both are bar chat but there is huge difference between Pareto and Histogram
Pareto chart used to show the defect data in descending order.
But Histograms are used to show distributions of variables.
And for more clarification you can watch video as already uploaded
Can you send that link
czcams.com/video/JFAdbKUYBAg/video.html
czcams.com/video/96HuQ39LNaI/video.html
I want separate video on difference between Pareto and histogram
Sir pls share this ppt
How to decide for which instrument we have to do which study??
See the given spec. is 5.0+0.3 then what measuring equipment you will select for inspection (0-25mm) and LC 0.001.
You have to decide it yourself
It's ok sir but I want to know that for micrometer we will do GRR study, like that can we do GRR for vernier also or can we do bias for vernier.
GRR study is mandatory
But you can do Bias study also
Sir will you please make a video on graphical analysis of msa studies to understand the results by seen the graphs.
Ok will make soon
Sir apki koi in-house training center h
Yes but it is closed now due to Covid-19 you can join my online training program
Join us on Facebook
facebook.com/Quality-Documents-Solution-105064617608142/