PORTED McCULLOCH PRO MAC 10-10S ARE A FUN LITTLE SAW TO FALL TREES WITH , PORTED IS THE KEY , NO NORMALLY A CHAIN SAW FOR FELLING TREES WITH.. BUT YOU NO ME .
My first saw was a McCulloch, an old one that my Grandpa had, with a hand pump oiler. Cut many balsam, maple, and cedar with that saw; put on an Oregon chipper chain and a sprocket nose bar. Great saw, lasted for years, until someone stole out of the garage.
Bell hopper sure does a good job on those saws! They’re so much fun to run and if you think about it...someday they’ll be even more rare the. Now. Love to you and the family❤️
Thanks buckin. I cut some small snags down that was dead. I used the bird mouth cuts that you showed worked great thanks for the tips. I like the tips and the fact you explain the use of the cut why you would cut them a certain way.👍keep up the good work.
Haha! I just watched the last video, and the notification came up... nice stuff, spending a nice Saturday afternoon outside with the PC watching a episode of the Buckin' and son adventures :) Have a great weekend everybody :)
I found u on utube .looking for how to sharpen a chain ! I continued to watch for ur mcculloch saws , I understand on why u use ur huskys ,theyre bad ass ! I thank u for using a mcculloch saw for another video , im a big fan of mcculloch be safe and continue to help make the world a better place!
Glad the tree next to the outdoor porch traveled to the right of the tree & didn't go left of it, creating a OOPS moment... Myself personally & not being a professional, I would have roaped that tree & appled light pressure to it away from the house. When working alone, I would use my tractor as a hookup point & pull the tree down. The 1st tree across the d/way, from my vantage point appeared the back cut came out below the hinge, hence the tearout above the hinge. First time I've observed this from you Buckin'... keep em' coming btw, I love this stuff! Bill on the Hill... :~)
I love your show have cut wood firewood and logs for years had 10 10 an Sp70 sp81 promac 800 700 about 2 years ago I lost a leg but hope to cut some more wood I have 460ms 346xp 357xp 2065 johnserd 510 dolman 540 dolman an 2 mac
You're a brave man, Buckin Billy, goin off into the Pit of Ferns single handed like that. Many a brave man has entered the Pit of Ferns, never to be heard from again.
I had a McCulloch timber bear I looooovvvveee that saw I miss her 😭😭😭 glad to see you are able too keep the classic saws running 😀😀😀😀oh the way I saw a pioneer two man saw it had a handle grip.on the nose she ran fine but the chain tensioner didn't want to do it,s job but she was beautiful machine 😁😁😁😁
Awesome vid Buckin, that Mac screams baby. And that hollow tree, scary footing there , be safe and take care you two... great duo at work the last couple of vids. HAGKD everyone,
Love all your vids man, well done. Always learning something new and I have been cutting wood with power saw for 30 or more years. Can still remember when my sister got my father his first chainsaw, a mcculloch. Before that it was all buck saw and ax. Cheers
What the heck was that crazy burl tree at the end?! I see the maple leaves on it, but that’s not like any maple I’ve ever seen!!! Would have liked just a single tree video with commentary on that little beauty.
My dad "worked in the woods" when he was laid off for a couple years, late 70s into the early 80s. I believe he used a pro-mac, probably a 10-10 based on what I can find for sale on Ebay. We used it to cut firewood for heating until the mid 90s, and then it was back up for a new 55 husky. He passed this summer, and I was trying to find that saw, can't find it, kind of sucks. I know he had trouble keeping it running, so it's probably at some ole small engine shop somewhere.
Mmm Mmm Music To Me Ears ! she Eats It Up, Nicely ! Bell-Hopper Sure Made 'Er Sing Eh ? Great Day with Ya Fellas ! Every 1 Have A Swell Week Ahead & Love To All From Down East ! ATB T God Bless
Have to finish watching later I have a log pile to cut, and I think I just heard my pro 10-10A start it self. I better go give it a run. Love to all the army see you all soon Union MI.💪
Wow... Yesterday I took down a tree that in my mind was pretty hollow and rotten. But compared to the tree in the end of this video it was actually pretty healthy 😲
If you read 'Brave new world' they had world peace. Sorry for being sceptic but I follow the news... Happy for you guys who can stay optimistic in todays world! Perhaps Im just depressed vacations over... lol. Take care!
The starter pawls (aka dogs) on the old McCullough saws are mounted on the flywheel. It's centrifugal force that holds them in. As the flywheel slow down, that force decreases and the pawls can grab the recoil mechanism. If you pull the cord out before shutting down the saw, your arm will absorb any shock from kickback. If you don't, that shock is transferred to the recoil mechanism and must be absorbed by the cord, the handle, the pawls, etc. Pulling the cord before shutdown protects all those components. There is a good bit of force at play so get a good grip on that handle. The procedure is found in old McCullough owner's manuals and is only relevant to flywheel mounted recoil pawls and may in fact damage other saws like the Homelites with their overrunning starter clutches/one-way bearings
Hey Billy is bell hopper going to get into production of those wrap bars? I'm going to build 1 out of some spare bars but is tricky. His looks really nice
wow there was some nice burlwood in that last tree I hope they let you take it home to sell, it;s probably worth more that you got for doing the rest of that job
Hi Buckin’ Great Job with the 10 10 S, I have just bought a Super 10 10. I believe that this is an earlier saw. Is there any difference in power between the two? Keep those great videos coming! Thanks!
Most fallers do it that way. It reduces waste on the keeper portion of the log. If he did it from the top then he would have to cut it again to have a straight butt end.
COOL VIDEO. That knurled and knotted tree surprised me that it was hollow. When you walk to the camera to speak, please stop the saw's engine or leave the saw behind. I could not understand a word you said and I can't read lips. Thanks.
Hi. Could you tell me what do you mean when you say modified? So a normal mcçulloch pro 10 10s dosen't doesn't run like that? I'm asking cuz I would love to buy one. Thanks a lot
I'm trying to learn how to get a message to you tomorrow I'm going to buy a pro mac1010 for 50.00 bucks actually comes with 3 chain saws but I'm only intrested in the Mac for 50 I got a drive a little ways but i was wondering what you thought of that price he says it has good compression other then that he doesn't know much about it
Buckin', Tim (Cotontop3) was talking about anti-fog safety glasses in his latest video, and saying just how much of a workout handling a big power saw can be. Heck, I had no idea how heavy those things are, (more than 20lb) and holding them up in front of you for hours at a time must take it out of you. No wonder you can swing that axe one handed knocking in wedges. Check it out at 15:00 onwards if you get a few minutes to spare. I have to say it made me respect you guys all the more! czcams.com/video/Xq_e10-jqR8/video.html
Billy Ray and Hogan. I hope you two never stop having fun together.
My first saw was a McCulloch, an old one that my Grandpa had, with a hand pump oiler. Cut many balsam, maple, and cedar with that saw; put on an Oregon chipper chain and a sprocket nose bar. Great saw, lasted for years, until someone stole out of the garage.
That 10-10 sure pulls with ease.. Good show 👍 Blessings from TheJonsberg in Norway
HELLO JONSBERG
Bell hopper sure does a good job on those saws! They’re so much fun to run and if you think about it...someday they’ll be even more rare the. Now. Love to you and the family❤️
Thanks buckin. I cut some small snags down that was dead. I used the bird mouth cuts that you showed worked great thanks for the tips. I like the tips and the fact you explain the use of the cut why you would cut them a certain way.👍keep up the good work.
Haha! I just watched the last video, and the notification came up... nice stuff, spending a nice Saturday afternoon outside with the PC watching a episode of the Buckin' and son adventures :) Have a great weekend everybody :)
I found u on utube .looking for how to sharpen a chain ! I continued to watch for ur mcculloch saws , I understand on why u use ur huskys ,theyre bad ass ! I thank u for using a mcculloch saw for another video , im a big fan of mcculloch be safe and continue to help make the world a better place!
GOOD MAN
Enjoyed the felling today, liked the close to the house cuts a lot. Thanks for sharing
Beautiful Mac sounds really stout. Great stuff as always friend....Stay Blessed, Kev
Love the sound of that 10-10s! Those Macs sound great, right? Major dead tree there. More of a tube at the bottom Hahaha
Love my 10 10
Glad the tree next to the outdoor porch traveled to the right of the tree & didn't go left of it, creating a OOPS moment... Myself personally & not being a professional, I would have roaped that tree & appled light pressure to it away from the house. When working alone, I would use my tractor as a hookup point & pull the tree down. The 1st tree across the d/way, from my vantage point appeared the back cut came out below the hinge, hence the tearout above the hinge. First time I've observed this from you Buckin'... keep em' coming btw, I love this stuff!
Bill on the Hill... :~)
I have a 10-10s pro mac just a fantastic little saw love to see you working your mac's
Loved watching the chips fly on that one that looked like an Easter Island Moai and the rotten one with bumps!!!
I love your show have cut wood firewood and logs for years had 10 10 an Sp70 sp81 promac 800 700 about 2 years ago I lost a leg but hope to cut some more wood I have 460ms 346xp 357xp 2065 johnserd 510 dolman 540 dolman an 2 mac
YOU WILL CUT
Ya know wont get that saw outa his hands for awhile, like a kid witha new bike patience mrs, Buckn, nice saw Buckn
You're a brave man, Buckin Billy, goin off into the Pit of Ferns single handed like that. Many a brave man has entered the Pit of Ferns, never to be heard from again.
I had a McCulloch timber bear I looooovvvveee that saw I miss her 😭😭😭 glad to see you are able too keep the classic saws running 😀😀😀😀oh the way I saw a pioneer two man saw it had a handle grip.on the nose she ran fine but the chain tensioner didn't want to do it,s job but she was beautiful machine 😁😁😁😁
Awesome vid Buckin, that Mac screams baby. And that hollow tree, scary footing there , be safe and take care you two... great duo at work the last couple of vids. HAGKD everyone,
Rockin the 'Thorogoods'. Lookin good Brother! 👍
Man your saws pull hard! I love it! You guys are rockin it!
Great job enjoyed that, really worked the saws hard!!!
That tree had some gorgeous burl on it !!!
Love all your vids man, well done. Always learning something new and I have been cutting wood with power saw for 30 or more years. Can still remember when my sister got my father his first chainsaw, a mcculloch. Before that it was all buck saw and ax. Cheers
Very enjoyable. Nice work men.
Looks like those folks back in the woods don't see the light of day Buckin, you have got to bring them out of the darkness.
Hey buckin that sure is a nice saw sounds great have a safe a blessed day
1010 😁 what a nice saw buckin sounds great ...
Man I really like that Mac I had a 10 10 auto you just couldn't kill it that s is a beauty
You guys were hitting it hard that day! Good job!
Love the sound of the McCulloughs
God bless brother stay safe be kind keep up the great work ...👍🏻👍🏻✌🏻✌🏻
Saws run great Buckin!!! And great to see you and Hogan!!!
More great stuff bud lots of love.
The Mac is wicked !!!
Can’t wait to hear one in person come September 😎
Hi buckin nice one stay safe buddy
That last one was sure a goofy-lookin tree..... thanks for taking the time to make these videos Buckin!
Love The Videos Keep Up The Good Work
Hey buddy good job like it 💪🏻💪🏻💪🏻🙏🏼
What the heck was that crazy burl tree at the end?! I see the maple leaves on it, but that’s not like any maple I’ve ever seen!!! Would have liked just a single tree video with commentary on that little beauty.
Love and peace to this community !
Have yourselves a great weekend all .
Nuttin like a 1010.....music to the ears 🤪
that last hollow tree all the burl! omg as a wood turner those would be great fun
LOL, your just too much Billy. Keep up great work you do. Peace Bo.
Hope the Army is doing awesome today!
Another great video buckin!!!
Mate!!!!! This is real bad!!!!!! Real!!!! Bad!!!!!! Too The!!! Bone! !!!!😆😆😆👍👍👏👏💪💪 Nice.😆
My dad "worked in the woods" when he was laid off for a couple years, late 70s into the early 80s. I believe he used a pro-mac, probably a 10-10 based on what I can find for sale on Ebay. We used it to cut firewood for heating until the mid 90s, and then it was back up for a new 55 husky. He passed this summer, and I was trying to find that saw, can't find it, kind of sucks. I know he had trouble keeping it running, so it's probably at some ole small engine shop somewhere.
Buckin' I have a new slogan for you. "CLEAN THE KERF" of the over cut and under cut. I think its pretty snappy myself, lol!
Mmm Mmm Music To Me Ears ! she Eats It Up, Nicely ! Bell-Hopper Sure Made 'Er Sing Eh ? Great Day with Ya Fellas ! Every 1 Have A Swell Week Ahead & Love To All From Down East ! ATB T God Bless
ANYTHING SHOW UP IN THE MAIL YET
Man thate power in that saw she's got some balls to her
Ahwooooo 👍
Tree work!
LOve the videos ,from Florida
Quite gnarly hollowed out totem pole - wow!
Hey Buckin' Billy
never seen anything like that last tree wow lol
Boy that last one just popped right off the stump in a hurry.
Have to finish watching later I have a log pile to cut, and I think I just heard my pro 10-10A start it self. I better go give it a run. Love to all the army see you all soon Union MI.💪
Greetings fellow traveller from Oamaru, South island N.Z.
Hey friends hope you all are having a great day😁✌
All the best to you and your family Justin,👍❤️
@@TheJonsberg right back at ya brother✌
Hey BUCKIN I think we would like to see unboxing videos
Love That 10-10!
Pretty Saw!
Wow... Yesterday I took down a tree that in my mind was pretty hollow and rotten. But compared to the tree in the end of this video it was actually pretty healthy 😲
💛10 10 s💛whata saw,
If you read 'Brave new world' they had world peace. Sorry for being sceptic but I follow the news... Happy for you guys who can stay optimistic in todays world!
Perhaps Im just depressed vacations over... lol.
Take care!
The fern gully!
YIP
Father and son combo!
LOVE it!!
What fuel mixture do you run?
Hi buckin Billy Ray be kind
Why do you pull the cord out just before you turn your machine off?
The starter pawls (aka dogs) on the old McCullough saws are mounted on the flywheel. It's centrifugal force that holds them in. As the flywheel slow down, that force decreases and the pawls can grab the recoil mechanism. If you pull the cord out before shutting down the saw, your arm will absorb any shock from kickback. If you don't, that shock is transferred to the recoil mechanism and must be absorbed by the cord, the handle, the pawls, etc. Pulling the cord before shutdown protects all those components. There is a good bit of force at play so get a good grip on that handle. The procedure is found in old McCullough owner's manuals and is only relevant to flywheel mounted recoil pawls and may in fact damage other saws like the Homelites with their overrunning starter clutches/one-way bearings
How u doin'? Nice saw indeed.
Shut up you Dago
Hey Billy is bell hopper going to get into production of those wrap bars? I'm going to build 1 out of some spare bars but is tricky. His looks really nice
Iron horse is a hoot.
I hope that last tree went to a woodturner! 😁
I wonder if any of the wood turners in your area would want to pick through that giant rotten burly one. I know they do a lot with epoxy now.
wow there was some nice burlwood in that last tree I hope they let you take it home to sell, it;s probably worth more that you got for doing the rest of that job
That one is big money with all the giant burros on it
Hi Buckin’ Great Job with the 10 10 S, I have just bought a Super 10 10. I believe that this is an earlier saw. Is there any difference in power between the two? Keep those great videos coming! Thanks!
I'm here early today. Live stream tomorrow Buckin?
Another fun day in the woods!
Oh my that big burly maple tree is hollow as man that thing is wild buckin seen a pro 800 mac for sale for $100 bucks I mite get me one hehehehe
Ole Buckin is always on target!!!
I just bought my first Mac Buckin she's a McCulloch 1010 automatic
Nice Mac! The S was a little more cc’s was it not?
YIP 57 ,,
If I may ask what is yer preference on cameras as to what you use mostly
The one on yer helmet is a gopro but which one is it? And what do you have on yer tripod?
this sound is sick
hey bucking I have dumb question manly because I don't know why do you make your pie cut from the bottom ????
DONE IT FOR EVER
Most fallers do it that way. It reduces waste on the keeper portion of the log. If he did it from the top then he would have to cut it again to have a straight butt end.
COOL VIDEO. That knurled and knotted tree surprised me that it was hollow. When you walk to the camera to speak, please stop the saw's engine or leave the saw behind. I could not understand a word you said and I can't read lips. Thanks.
Hi. Could you tell me what do you mean when you say modified? So a normal mcçulloch pro 10 10s dosen't doesn't run like that? I'm asking cuz I would love to buy one. Thanks a lot
Hi
The dirty burly maple
Tengo una igual y siempre tengo problemas de encendido e incluso dejar de utilizarla por cansancio de encendido..
This doesn’t look like pro Mac 10-10s muffler is different?
Can you make a video of just the 10-10?
I'm trying to learn how to get a message to you tomorrow I'm going to buy a pro mac1010 for 50.00 bucks actually comes with 3 chain saws but I'm only intrested in the Mac for 50 I got a drive a little ways but i was wondering what you thought of that price he says it has good compression other then that he doesn't know much about it
Give boyo a helmet cam
That is a rich mix I run my eco 670 at 25:1
Thanks 😎
10 10 5x5 tree yahooooo
Buckin', Tim (Cotontop3) was talking about anti-fog safety glasses in his latest video, and saying just how much of a workout handling a big power saw can be. Heck, I had no idea how heavy those things are, (more than 20lb) and holding them up in front of you for hours at a time must take it out of you. No wonder you can swing that axe one handed knocking in wedges. Check it out at 15:00 onwards if you get a few minutes to spare. I have to say it made me respect you guys all the more! czcams.com/video/Xq_e10-jqR8/video.html
Hola amigo necesito un favor el cigüeñal de la moto sierra promac72