Thanks. FYI - It's actually a requirement in AS 1562.1:2018 section 4.8.3 to fix on upper and side. HB 39:2015 section 8.7 shows the use of concealed fastening clips for side so fixings are not visible.
Yes, same for me. Excellent details. Wish I'd found you before I started. Am able to apply your techniques to the remainder of my project. Many thanks @MetalRoofingOnline.
Perfect for my steel roof project. Tvm. Quick question. I used a damp proof membrane over marine ply wood and then put the steel roof over the dpm but im getting mold on the inside of the ply wood. Where do i apply insulation? Between dpm and steel roof, between dpm and ply, or inside shed and apply to inside ply wood? Thanks
A bit of advice about use of handed snips would good. Using impact driver on roof screws is not recommend by fastening suppliers as it damages the coating. Drill driver is faster and quieter.
Thanks for these informative videos. Can I ask how you do it when the quad gutter butts into the fascia board I.e. the board runs and extends past the stop end of the gutter?
Jonathan Rashleigh . Hi Jonathan. Great question, you need to use an extra length of barge capping along the straight section, bend down the far side to make it neat and join up the other side with the barge that runs up on the angle. 😊 regards Daz
You hit me for a 6 with your educational video, this one certainly scores a century
Thanks.
FYI - It's actually a requirement in AS 1562.1:2018 section 4.8.3 to fix on upper and side. HB 39:2015 section 8.7 shows the use of concealed fastening clips for side so fixings are not visible.
Sir Donald is pretty handy with those tin snips
Thanks Jimbob351. 20 years of practice 😃
Excellent tutorial!!! Impressed.
Cheers Dazza, gotta do this on the weekend, knew you’d have a video to give me a crash course 😂😂🤙🏾
I'm from Vanuatu, you doing the great job 👏 is helping me a lot tankyou.
Very helpful thank you. Better than the instruction we received from the supplier of our flat pack structure..
Kylie Wright. Thanks Kylie 😃👌
Yes, same for me. Excellent details. Wish I'd found you before I started. Am able to apply your techniques to the remainder of my project. Many thanks @MetalRoofingOnline.
just what i needed to see .... top man
superb tutorials thank you
Best video out there thank you
Thanks so much - hopefully it was able to help you 😀
thanks .......champion
Damn good. Great videos and very helpful.
Thanks for the feedback - so glad it was helpful for you!
Helped so much thanks
😃
Really helpful. Many many Thanks
Hi Isobel. 🤙🙂 cheers
Brilliant video. Thanks
Glad it was helpful!
Great video, thanks
Pale eucalyptus nice colour. Rolled colonial barge next 🖒
Alexander Stevens. 😀 I’ll see what I can do 👍 regards Daz
@@metalroofing7210 thanks man 👍 working out a rolled bullnose the other day did my head in
Can yous please do a video on how to install the tray that goes on the gable end under roof tiles?
Can you show a barge roll cap over barge board, gable roof and fitting the capping around a finial?? can't find that detail anywhere.
how do you do a skillion roof corner ?
Great videos. What is the purpose of the hook. I'm using trimdek for both wall and roof. Do I need the hook.
Great video, but is that a real Banksy in the background???
Hi Ambrose,
Thanks for noticing my attempt of a Banksy painting 🤙 when I’m not on a roof I do like to relax by painting 😀
@@metalroofing7210 well done!! Lots of talent!
Perfect for my steel roof project. Tvm. Quick question. I used a damp proof membrane over marine ply wood and then put the steel roof over the dpm but im getting mold on the inside of the ply wood. Where do i apply insulation? Between dpm and steel roof, between dpm and ply, or inside shed and apply to inside ply wood? Thanks
Hey mate what kind of sds chuck drill bit is that your using?
Hey mate do the Ridge caps have to be scribed in or can you leave them uncut
Hi Brod, It all depends on where you are located and the regulations in your state. 👍
A bit of advice about use of handed snips would good.
Using impact driver on roof screws is not recommend by fastening suppliers as it damages the coating. Drill driver is faster and quieter.
How does the capping interact with the ridge capping? This roof doesn't seem to have one?
Hi Isobel. The roll top ridge is the last part of the roof to be installed. There is another video that we have done for this 🤙🛴
whats the thickness of barge capping?
Don Bradman looks suspiciously like John Lennon from the earlier video...
Caleb Fuller 🤣🤣🤣🤙
Great informative series, I think he has a triplet called Tiger Woods.
Thanks for these informative videos. Can I ask how you do it when the quad gutter butts into the fascia board I.e. the board runs and extends past the stop end of the gutter?
Jonathan Rashleigh . Hi Jonathan. Great question, you need to use an extra length of barge capping along the straight section, bend down the far side to make it neat and join up the other side with the barge that runs up on the angle. 😊 regards Daz
Do you have a method statement for the installation?
What is the purpose of the 10mm hook with this kind of flashing?
Stops capillary action (water running behind the metal) and it also looks better because without the hook you see bowes in the metal
Donald Bradman?
Shane Warne 😀🏏
Very average