Fixing a Snapped fishing rod
Vložit
- čas přidán 28. 12. 2022
- I managed to break my son's fishing rod and not on a fish but trying to ram it into a bag which already had a folding chair in. I could of just left it a bit short and glued a new tip top guide on but then the rod would look at bit odd. So I used a piece of broken rod tip to fit inside and bring the two parts back together, This was glued into place with some epoxy rod building adhesive similar to 40min epoxy, To wrap over the joint I used some strips from a piece of carbon fibre cloth, these individual strips can be bought and are sold as carbon fibre tow. I used rod finishing epoxy to coat the wraps and some shrink rubber tube to compress it while it cured overnight. To finish I sanded and then used spray can clear coat, but an thin layer of epoxy would do the same. This method I have used a number of times to fix broken rods, generally it can kill a little bit of tip action but to honest after a few casts i generally forget the rod has ever been repaired
- Sport
You should make some videos of you just fishing with the tackle you've made, i think that would be a great idea
yes it would thanks
Can't, the stuff he makes don't work
Literally tried to do thos today but the wire i used was too flimsy. So I just added a rod tip. But I'm happy to see I almost did it similarly!
J’ adore tes vidéos tu es le meilleur 🇫🇷👍
I swear you must have some Indonesian blood. I actually thought this was "rakitan +62" before I saw who made the video. They are very creative people who can do a lot with a little.
I take is a compliment, thank you
Unwaxed dental floss is great for wrapping. I use epoxy.
What if I lost the tip of the rod
The attention to the detail is crasy
привет из России! вот, оказывается, как "это" делается... 😊👍👏
тоже бывает "жалко" свою удочку и не такое сделаешь )) ну вот так, я б точно не смог сделать! 🤣
@Alpha Viking
@Alpha Viking
@Alpha Viking
I found this gets much harder to do the bigger the Rod. The repair on my 6 foot ultralight went perfectly. But my 7’7” heavy was a challenge.
Well done!
Cool.
But your robbing self of the joy of going to your favorite tackle shop and buying a new one.
for the day job i work in fishing rod factory, so looking at new fishing rods is not a novel experience, but this was my son's first fishing rod and I managed to break trying to shove it in a bag with fold up chair
Good job.. i like it..👍👍
Хорошая работа 👍
What is the that thread like thing u used to wrap on the blank
What did you use on the outside of the rod, the black and red string like stuff
Great !
salam mancing dari Pekalongan-Jogja bang 😊
Hi mate, can you tell me what kind of steel you use inside the rod tip? because i try to find in online shop something similar, but i cant🤦♂️
Where did you get that pack of fiber from that you used to wrap the outside of the rod with?
What kind of wrapping did you use? Covered more surface area for the rod.
Thats amazing
Nice 👍
カーボンフィラメントには巻く前に予めエポキシを染み込ませることと、シュリンクチューブに針で空気抜き穴を開けた方が良いですよ
there is no need the tube has a hole at the end and the resin is thinned by the heat, and the shrink tube pushed the excess resin out and most of the air
😊
@@PaulAdamsTheHandmadeFishermanそれはその通りですが、両端の穴からのみ排出するよりも、側面に多数の穴がある方がより効率的に余分なエポキシを排出可能です。これによりシュリンクチューブはより強く収縮し、カーボンの強靭性を発揮しやすくなります。見た目にはわかりにくいですが、両端の穴だけでは余分なエポキシがカーボン上に残りやすいです。これは特に竿先では余計な重量増加にもつながるので重要なポイントです
what glue did you use
What is that rod material you use for joint iron rod or fiber rod?
it is another bit from a broken rod, i tend to collect bits of broken rod
what's the name of that kemikal that you made?
epoxy resin
Привет из Узбекистана... класс❤ нет слов... естли видео подробнее ??? ❤❤❤
Nice job ,but how was the Rod action after you rapair it.
I know flyfihing rods Will never be The same
after getting over the first few casts i really didn't notice any difference, i did choose a scrap insert that was not far off the flexibility blank, there is company in europe that repairs fly rods using a similar method but they have a bit more of systematic approach to getting the correct flexibilty in the rapair
No rod will ever cast the same and it'll break again first big fish.
Song?
I need reel spares? Anybody knows?
Is there actually a strong as it was before when you repair it or does it lose strength?
it is hard to know that exactly, but in use i have pulled a mountain bike out of park lake with this rod after the repair. In theory a new rod should be better than a repaired rod, but in practice fishing rods are still made by humans and can have faults in them. This was very cheap fishing rod and i could bought another, but it was my sons first fishing rod.
Interesting that the heat shrink doesn't stick to the epoxy, do u know why that is?
epoxies don't really stick to most plastics without a rough surface to key into, i am peeling this off, it would be hard to slide it off though
@@PaulAdamsTheHandmadeFisherman this will help make my repairs look alot better thanks!
What did you wrap it with ?
it lookeed like hessing you get under a sofa on the bottom
Carbon fiber maybe
Then it breaks further down from where you strengthen it. I used nylon and superglue to wrap
you are a next level expert
@PaulAdamsTheHandmadeFisherman nah my friend Brian Himalaya is to me the best all around ocean man,saw him catch a 75+ lbs ahi from shore, whipping with a plug. It's on the internet Brian ahi from shore,or on boat catching 100+ ulua from boat with a plug I made .
Best for Orginal 😂😂😂👍👍👍👍👍👍👍👍👍
Cool
what sort of glue did you use if you dont mind me asking? ive done a very similar repair on 1 of my rods but wasnt sure on the correct glue to use. + i didnt have the carbon strands, i just relied on a tight fit with the carbon insert.
i used rod building epoxy proglu for gluing the inserts, and threadmaster finishing epoxy for the carbon strand and clear spray lacquer
@@PaulAdamsTheHandmadeFisherman thanks for the info and such a quick reply. If i ever need to take my bodge job apart ill hopefully be able to use the right glue 👍
Keren bnget c
I hv many broken rod plz I need speech material to join n fix ot
it is in the video description thanks
What is the diameter of the carbon rod used this seems to be exactly where mine is broken you could save me a fortune 🎉
i used another broken rod tip as a donor
Genio
You can't fix a rod broken like that it'll never be the same the action , power, balance will never ever be right
yes you can and i did, i have been fishing with the rod for about 3months and still have not noticed any difference, maybe if you repaired it, it would be a different story
@@PaulAdamsTheHandmadeFisherman, no you cant because the dynamics are altered it will never be the same as it was, yes you can repair but never the same especially not in this method, period. 👋🏻
@@-_-_-.... , you must a super pro fishermen if you can tell anything about a change in rod dynamics just by a couple of a lure chucks, i can only bow to better judgment
The fish don’t know any different…
@@-_-_-....would you rather he just throw it away?
👍😊
You just created a hard spot, no flex, where it will break again above or below the repair.
i used a flexible piece of carbon fibre rod as the insert and wrapped the carbon fibre tow on the bias for strength and flexibility. Oddly the first thing i caught with this rod after the repair was mountain bike in the local lake, and i manger to pull it out and strangely got to ride it home
@The Handmade Fisherman ok. I've seen a few guys make similar repairs and they usually fail
@@PaulAdamsTheHandmadeFishermankinda like how we repair bike forks, same method with the CF and it can flex and take abuse like a new one, folks doesn’t get how strong this method is, screw the insert, the insert is almost just a guide for the CF wrap
Bonjour j ai une canne mini brin cassé j aurais souhaité la faire réparé
No doubt it's a great job But tell me where to sell this carbon fiber ....
ebay carbon fibre tow
Can you tell me the specifications of the carbon that goes inside?
it was from another broken fishing rod, full carbon
Think you
Waw👍
Просто подобрал бы другой тюльпан! 🤷♂️
А так красавчик!
Изменились бы характеристики удилища, как по мне.
How much for you to put the tip back on one
I really don't have the time. sorry
i would contact a local rod builder
NİCE
I don't want to be rude as this repair looks fantastic but wouldn't this cause more problems than good as it's supposed to taper down to allow more flexion how are those repair would disallow for any kind of flexing😕
it is hollow flexible carbon fibre insert and the external wraps are made on the bias to add strength and flexibility , i have been using the this rod since the i fixed it and to honest i had forgotten i had repaired it
I have a rod that needs fixing
Waw
Слишком много нитей и смолы получается. Да и вставку можно использовать короче. В данном случае, верхушка будет слишком плотной и не будет играть
could you make a bait to fish peacock bass? send a salve to brazil😁
only if i could come with the bait
@@PaulAdamsTheHandmadeFisherman but I think you can, but only come to Brazil if you want because if you don't want to or can't come just do the bait, it's great
@@PaulAdamsTheHandmadeFisherman I recommend the channel "FABIO BACA" a fisherman from Brazil who also fishes peacock bass Then you analyze the fish etc.
That's exactly why I save all rod pieces if I break one I can use parts to fix it 👍👍👍
Jos
Quando è così si butta.
Boleh baiki yang saya kah
May i send you some rods??👍
only if the are not broken, i am getting very good at breaking my own, thanks
Я сломал уже раз пять спиннинги..и пришел к тому что если берешь новый спиннинг и потом ломаешь его то он не будет прежним после ремонта .. чувствительность не та ..и прочность увы тоже ..но если ремонтировать то только внутри вставлять трубку того же материала как спиннинг и снаружи и все это дело на секундный клей и надёжно получается
О поломается он там же
kvapka sekundoveho lepidla urobi tu istu sluzbu
Tip to avoid this:
Buy fishing poles that are worth a damn.
wise words, but it doesn't help when to try to ram a fold up chair into a space occupied by a fishing rod and then close boot door on it
In rods for fine spinning its like the more expensive the rod the more easy they break when handled wrong. Extremly expensive rods have carbon with nearly no epoxy pressed super hard. They more light more fast but break more easy. For example i have a 400 dollar daiwa rod with 100g weight. A similar length rod i have with same casting weight and length for 70 dollars has 160g weight. The cheaper will break less. It survived already a very bad mistake.
Ugly stick 😈
Купил новою и всё
Better idea skip all of this and get a new one
Rods are expensive.
@@qwertysoul1231 not all rods are expensive or you just think all are expensive because you overpay for rods
@@Rexy_3070 carbon fiber is expensive
I've caught 50lb carp on £20 rods... you don't need to spend 100ds on a rod to get a good one.
fr
For all that work might as well go buy a new Rod 😅😊
i cannot replace my sons first fishing rod
@PaulAdamsTheHandmadeFisherman go to a store . I could see in a dire emergency but go to a store the same or next day🤔🤨? Unless it's a signature one of kind rod or engraved I really don't see your point about can't be replaced.
Ногти грызём?
well observed
@@PaulAdamsTheHandmadeFisherman unfortunately i have this problem too 😢
Не будет он уже работать как новый, с теми же показателями. Ерунда все это, выкинь и купи новый😂😂😂😂
может если бы ты его починил
The rod action will be gone. Just spend some 30 dollar to buy new one.
Just buy new rod
It is my son's first rod
Vẫn gãy
Проще тюльпан переклеить и всё!? 😁😀
каждый является экспертом перед попыткой