I hope it is going well! It can be a little tricky at first, but with a little practice you’ll get the hang of it. I’ve never mentioned this on my channel, but you can go to Walmart or a sporting goods store and pick up an inexpensive telescopic “cane pole” type of a rod like one of these: www.walmart.com/ip/10-Black-Widow-Ready-Rig-Telescopic-Panfish-Pole-by-B-n-M-Pole-Company/15908257 and unscrew the butt cap and slide all the rod sections out and use them to practice on. They are tapered like a normal rod would be and have about any diameter you would ever run across when building a rod. Cheap too!
Yes! Size “A” is similar to what I’m using in this video. Size “D” is a common size that has a thicker diameter and is much easier to work with for most people.
This actaully helped alot. It seems like this kind of stuff gets skipped over. Building my first rod right now, thank u
No problem and I’m glad it helped you out!
You're very good at explaining all these techniques. I now use alot of your suggestions. Much appreciated.
I really appreciate that and I’m glad you have found some useful information in my videos!
nice job...simple an ez...ty for the vid...made my life easier,,,,
Glad it helped!
Well done I've learnt alot from the video thanks
Thank you!
Great job explaining and visualizing this process. Thank you.
I just started building any tips and tricks always are helpful
Thank you. Looking forward to wrapping my first rod this weekend.
Good luck to you!
Doing my first practice wrap now on a carbon arrow shaft. :) Thank you for your work here.
I hope it is going well! It can be a little tricky at first, but with a little practice you’ll get the hang of it. I’ve never mentioned this on my channel, but you can go to Walmart or a sporting goods store and pick up an inexpensive telescopic “cane pole” type of a rod like one of these: www.walmart.com/ip/10-Black-Widow-Ready-Rig-Telescopic-Panfish-Pole-by-B-n-M-Pole-Company/15908257
and unscrew the butt cap and slide all the rod sections out and use them to practice on. They are tapered like a normal rod would be and have about any diameter you would ever run across when building a rod. Cheap too!
Outstanding explanation.
Great video and very informative.
Informative video! I learned a couple of techniques from it. TY!
I’m glad you found it useful!
Outstanding. Thank you Soo much this has been extremely helpful.
I’m glad it helped!
Thanks 👍
😵💫😵💫☘️👍👍👍 I’m a beginner. Glad I found your video .
Thank you, hope it helps you out. I have a lot of other rod building videos you may find helpful as you get started. Good luck with your rod building!
Good information
Thank you!
nice job
Thank you!
Are there different thicknesses of wrapping thread ? I'm a beginner and I think what I'm using is awfully thin.
Yes! Size “A” is similar to what I’m using in this video. Size “D” is a common size that has a thicker diameter and is much easier to work with for most people.
When you pull your thread out in the end, could I introduce new colour at that point so I pull two tag ends through
Sure!
3rd
Yes!