RatRig V-Core 3: First Print
Vložit
- čas přidán 7. 09. 2024
- First print after getting the machine setup and calibrating the extruder.
70mm/s base speed, 50mm/s walls.
3D Fuel PLA Pro, 230c nozzle, 57c Bed temp. no pressure advance or input shaper tuning yet.will start turning up the speed soon!
More info: v-core.ratrig....
Awesome! great job man!
awesome build bro
That is one beautiful machine. ^^
Hosted by Bandicut!!
Amazing 🤩
Nice build. What main board did you use? I'm going to use an Ezabl also.
I used the SKR Pro - working great so far!
@@mikey631 Thanks for the answer
this Is not a Eva carriage ??? hevort remix or vzbot??
It's a modified EVA carriage, though not much different, really (only the back plate). but the extruder part is a remixed version of the VZbot/hevort extruder. I'll be posting files after a little more testing time.
So you are using 2020 extrusion? I feel the 3030 for RatRig specs is kinda overkill for a 3D printers especially if the build size is just 310x310mm.
This is 3030 all the way around, except for the X axis gantry, that is a 10x20 extrusion. I don't think 2020 is going to be rigid enough for a ratrig, because the frame is actually quite large, and when you want to print at higher speeds, frame stiffness is very important. You may be able to get by with 2020s if you add metal side and back panels to your frame for reinforcement though. but the cost may be more than just using 3030 extrusions to begin with.
3030 is the way to go. My voron has all 3030 and no printed parts. Wouldn't look the other way
what hotend/extruder system is that. I have my vcore 3 kit on its way and i wanna try something other than eva for he/ex
I'm using a slightly modified version of the EVA carriage with my own extruder that I remixed from Mirage C's design on the HevORT.
@@mikey631 If you dont mind can you please share the stl files
@@mikey631 Exactly what I was planning to shed some weight from the extruder. Did you have to redesign of could you just use the parts of the hextrudort?
What build plate surface is that?
It's the CCTree stick on build surface. I put them on a magnetic mat I have on the bed. Helps the first layer stick better, and leaves a really nice texture on the bottom of the print. I found this brand to be more durable than the typical ones you find on Amazon that are black with a white grid printed on them, which always comes off and shows on your parts
CNC gantry?
the gantry is a 1020 "flat" extrusion. basically half a normal 2020. you can find them from Misumi.
@@mikey631 i can't find it, can you give me the part number or the link?
How do you like it? I just ordered the kit, but I'm getting cold feet over the small number of people who seem to have them.
Teaching tech seems to be loving his. Has a full build log
It's a great design. I had a custom built Hypercube that I took apart to make this, and have zero regrets. Also, the backlog of orders over at RatRig is huge. They just received a huge shipment of parts for this kit, so you will be seeing a lot more of them very soon