2JZ Swapped FRS is almost ready to start!
Vložit
- čas přidán 22. 01. 2024
- ShopJimmyO.com
Support the build!!
/ jimmyoakes
/ jimmyoakes
Send some sub mail!!
Jimmy Oakes
PMB 169
61 N. Plains Industrial Rd.
Wallingford, CT 06492 - Auta a dopravní prostředky
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
You can start my engine anytime Jimmy.
Jesus Christ. I just about spit my coffee out!
Pauseeee
No pause, all Go😂😂
AYOOO
😂😭😭🤣🤣🤣😂😂
Nobody out there teaching and going in depth to make full builds like you Jim. Keep doing what you've always done..
The only thing close is DriftHQ channel.
Are you serious? There's hundreds of channels that go far more in depth than this melt, you lot simp so hard for a guy just doing normal shit it's hilarious..
Not hating on Jimmy one bit, but have you ever heard of Rob dahm
@@ddpliveries9671 or the other ten thousand CZcamsrs making the same kind of content it would appear 🤣
@@BariLopesh some channels are entertainment based car content, while others are educational, to me Jimmy's entertaining and splashes in some educational stuff now and then which is 100% ok because I'm here every post
JZZ30 Soarers came stock with dual mufflers
Aristo's also
Jimmy saves my sanity by uploading
SC300 (soarers) & GS300’s (aristos) come factory dual exhaust, and they all sound good. Granted not GTE, but when people go NA-T or GTE swapped and go dual exhaust like Blitz Nur Specs, they sound phenomenal
Did the gte aristo not come dual?
@@jordanphillips8642, they did. That’s why I added them in parentheses. USDM & JDM both got dual exhaust.
Jdm Soarers can come with a 1jzgte from factory
@@HallowellsSpeedShop ahh ok ok
@@jordanphillips8642 Aristos oftenly came with 2JZ-GTE and Soarers oftenly came with 1jz-GTE
Spoons face says it all with that exhaust 😂🤘
Jimmy's a smart man, gets a super expensive radium hanger with the car, gets a free deatschwerks one as they're a sponsor, then he's gonna sell the radium one lol
Everyone aint grimey like you
@@H1GHD3FF Lol, I wouldn't have done it, would've just ran the Radium because you already have it and it's simply better, stop the assumptions.
But name one good reason why he would leave his radium on a shelf and go to the lesser, partially plastic DW hanger ? I guess giving it to spoon could be a good reason, but he mentionned he got a DW one for him too.
@@imnotapeople be quick af to judge someone they've never met smh
@@Berm_Blaster
Eh it's whatever, plus honestly there's always many ways to see it, grimey and greedy, or loyal to his sponsor, you know.
I was just joking to be fair, but there's always people just wanting to be negative.
In what way is that grimey? That would be basic economics- you have something sellable- you sell it. @@H1GHD3FF
spoons swirl pot is so freaking sick
Even though it has a dong on the side of it??? Lol
I don't think I've ever been blue balled on a start up so hard.
Dual tips brings back the z32 days
Hey Jimmy I'm a 63yo lady from Wisconsin and you've inspired me to JZ swap my 320i
ethanol content sensor goes on the feed. that dw bypass block is meant to give you restriction free flow
16.00 talking about 420 whilst wearing Dj's hoodie. I see what you did there sir 😏 👏
You two are getting faster at building these cars. ✌🏽
I’m not even a fabricator or have any real knowledge about any of it but getting to watch Spoon and Johan(LZ’s guy for those that don’t know lol) is truly a privilege. They are so talented and masters of their craft. Big ups to both of them!!
Those new flex fuel sensor mounts aren’t a restriction anymore, they have a bypass to keep flow at max and still sends fuel thru the sensor. So basically the sensor gets its fuel to read and the rest goes around the sensor completely since you don’t need to read 100% of the fuel to get content rating. Super trick piece 👌🏻
I was gonna ask exactly this because what else is that parallel tube supposed to be for? Seemed to me like that block was designed to bypass just enough around the sensor for it to essentially not be there in terms of flow
Love it how if you wanted a swirl pot made you'd wait weeks, Spoon just cracks one out there and then! Everyone needs a Spoon!
the whole idea behind the DW flex fuel mounting block is that it allows more flow through the upper tube which no longer restricts the fuel flow and can be used for the fuel feed👍
Came here to point this out. So the fuel system doesn’t have a choke down at the flex sensor
Was looking for that comment 😅👌
lunchtime with Jimmy, my favorite part of the day 🤣
Steve doesn't say much but when he does it really counts.
Literally the worst car guy ever , but we all have that mate who can’t drive but loves the vibe we give out , can’t live without him wouldn’t be Oakes garage without him
Yeah it's great listening to him repeat whatever jimmy or spoon said 30 seconds previously...
Damn spoons making wild progress on his 86. I can't wait to see yall slide both these in tandems
First, i've done it. now that i've actually watched the video, SC300 comes factory dual.
i was screaming this in my head
When I think hard about a build the most Important and can be expensive to do a build like this is the fab work or welding. I'm going to start learning to weld and fab for my first build coming up
Damn Spoon you should market that swirl pot.
Spoon has taken this channel to a whole new level
Spoons' welds always lookin' noice!
@20:23, that block isnt just a block, it has that HUGE-8 tube taht your thumb is on, it allows for full flow of your fuel while still monitoring the ethonal content through the sensor. its best of both worlds. whole point of it being that beefy is to allow optimal flow while plummed into the feed side =]
Love how how Jim says his gonna fab up a exhaust but we all know spoon built the whole car and Jim just talks and opens boxes 😅😅😅
right cus jimmy didn’t install the entire fuel system, and soon will do all the wiring and tune the car…. we all know spoon does the fab work but saying he just talks and opens boxes is a complete lie.
I love this outta the blue build and that you dove right into it, no teasing just straight WORK
Spoon is an artist. (read in french!)
Spoon is an artist!
Spoon, stuff a blue shop towel inside anything you cut off to add AN fittings. Cut through the towel and then vacuum the debris out of the towel to avoid any trash going through whatever system.
Spoons 86 is gon be fire
❤❤❤spoons work so good
Loving this build! Can’t wait to hear it 🤙🏼
1J Soarers came dual exhaust from factory. It definitely softens and smooths out the noise. Single exit always sounds better though.
Love the FRS content, its insane how fast you guys build this thing!
Pulling out the radium dial hanger for the DW seems sacrilegious lol
The dw piece looks dope tho
I'm so happy to see this build almost done. Keep it up with your great content Jimmy oaks and crew.
Very educational, thanks, jimmy
It's coming out so good!
Can’t wait to hear and see this thing Rip!
dual tips is dope, jz aristos are dual exit and they sound sickk
The GS300 has a Y pipe from the factory!
Such a sick set up!!
11:56 to answer Austin's question, both the 1st and 2nd gen Lexus GS300s/Aristos have factory JZs with dual exit exhaust :P
Just caught up on this build and this drops... nice
Jimmy you crush it with the content every vid and always so entertaining and I enjoy how you go step by step explaining everything most dont and how you have stayed so humble through all the years and haven't turned into most youtubers just about the subscribers or views also whatever you do with the FRS I know it's gonna be so sick with your eye for style and how you do your cars and the team you got its gonna be perfection 👌 I look forward to all the content you have in store for this year and as always keep up the great work 👍
Nicely done 👍
This was great. Just the fellas grinding out progress. Turning out really clean as usual.
Excitement around the project is nice to see. The longer ones can feel like a drag.
Spoon's 86 looks wild🤟🤟
I love the dual tips!!!!
Damm remember getting cars running in a video. Dude might as well milk this another 8 episodes, literally works on one part per video.
Bro. I cannot wait for this frs side quest to be over.
Loving the frs jz content
Great video….Lots of progress, lots of learning” and some bloopers/“dad brain” moments 😜and many steps closer to hearing this thing alive! 😎👌
You boys are amazing at the builds, well done on this "little" side quest. I wish I had a project, so I could use all your great tutorials, lol.
haven’t missed a video in 2 years. keep it up jimmy. love you guys
Can't wait to hear the FRS run
Take the line from the top of the head and run it to the upper radiator hose along with the passenger side of the head that used to go to the throttle body. Block the two bolt on the back of the pump housing. The head flows out and you're feeding hot water into the pump.
TOP JOB!!!! loved it
Man living it... working on the mighty jz and rb at the same time and not just working making them look a timeless piece of art... Appreciate you man
Still don’t understand how jimmy only has 520k followers. Not something to scoff at by any means but like, comeon.
i am enjoying these 2jz and r34 videos. they are great 👍
I want to watch all the full processes an line making and also fuel pressure reg installation!!
love the video though jimmy!
It’s looking 🔥🔥🔥🔥
Sick video! The JZS161 Toyota Aristo came dual muffler 😁
There is just something different about this channel that sets it apart from others. It comes across as a perfect blend between a "shade tree mechanic" and an automotive you tuber. Close to perfect entertainment. Looking forward to more Porsche content though.
Jimmy and gang, y'all rock! Love the 2JZ. Peace ✌️
Yall keep it up!
Austin , your camera work is mint my guy
😩 we need more !!
Been running ecu master but seeing that ethanol sensor setup and all the other link systems they are offering. I’m slowly being swayed to purchase one on my next build! Also channel gives new mechanics and fabricators on ideas on building there future cars. Good stuff!! man.
Absolutely killin it 👌
Jz with twin pipes sounds the best!
Jimmy and spoon make this look so easy. I open my hood and im like 🥴🥴🥴
Love DJ's merch!!
DJ’s new merch is 🔥 🔥 🔥
I still don't know why you do not have a million subs. You are one of the best all around car channels.
Love ya content ya mad rooter!!
Another Banger cheers jimmy
All these years and i just realized i didnt hit the notifications bell till now 😲
That's an old school hot rod trick the thermo delete. We also made cookie cans on our intakes. Cold was good
Dang the boys are ripping through this one! It’s sick to see a CZcams build move so quickly 😂 can’t wait to see the end result!
I have a double tip k swapped 300zx it sounds just fine
Damn spoon's a fab master. 😮
Epic builds with epic dudes
As far as the conversation about dual exit on K series,I have dual exit exhaust on my k24 tsx ,it's full exhaust header back 2 1/2 inch piping and it sounds great 👌 ,definitely more unique but in a good way.
Dual tips definitely look good, especially given that there's the exhaust opening for the second one and would look like genuine ass with only one filled unless you changed to an aftermarket bumper. Hate the burnt tip tho
Yoo love these in depth builds, it would be tuff if you can show spool weld sometime. I’m tryna learn some of that
*Exciting stuff*
Run the head heater core port off the back of your head to your swirl pot. Putting it back into the water pump your just dumping hot water back into the block. It’ll run cooler if you do so
Jim ya about broke the damn windshield there bud!!!!!!
ive ran many cars with no tstat even in the winter. i just put my fan on a switch and when it got too cold i had a piece of cardboard to cover up half the radiator🤣.
Bracket man Jim is the goat.
Awesome man thank you I appreciate your hoodie u send me ❤❤
Allways excited for a Jimmy Oaks video makes my day what a inspiration to us all from the z cars to full 2jz builds what a Legend😊🎉😊
Getting there now boys
SC300 and JZZ31 Soarers came with dual exhaust in both 1JZ and 2JZ. Turbo and NA.
love how your always wearing the homies hoodys an tz