ford explorer P0121 P060B P2104 P2110 P2126 fix

[@77chicha]

Thanks HOMMIE

[@raheemmahir3701]

Really appreciated your work skill 👏

[@josephmiller2118]

Good video Brother, I'm having the same codes pop up...think I should strip the wiring and look for a short now...was going to have the pcm reprogrammed but I'll look at wiring first! Once again ... good video!!
How did the fix turn out?

[@partsshooter]

@@josephmiller2118 still fixed

[@mobayguy]

Thank You! - Very helpful

[@chrishans5629]

i am doing the same but when i was taking the tape off one of the wires that i took out has a one little broken wire . what would you recommend.? can i just cut the wire where that one broke to make it even and clamp the metal end on the wire ? i hope this makes sense lol

[@gustavomartinez324]

What’s was the fix bro thanks 🙏

[@BruceRadford]

And
what was the significance of the code that had nothing to do with the Throttle body??

[@BruceRadford]

Did this fix the customer's problem??

[@AJ_C300]

Nice work💯 Can i ask u some questions about the m276 engine?

[@partsshooter]

M276? What's up?

[@AJ_C300]

Im having the whistling noise but the pcv valve has already been replaced. Any other causes for excessive crankcase vaccum?

[@partsshooter]

@antoniomathisaj4300 remove the oil cap when whistling, if noise goes away, check pcv system

[@AJ_C300]

​@@partsshooter What damage should i look for in the system?

[@partsshooter]

@antoniomathisaj4300 check for a damage check valve that are integrated in the pcv itself. The damaged valve will suck in air from intake when it shouldn't. Removing the oil cap when noise is present removes the squeezing noise the suction is causing because of compromise pcv valve

[@Zyrasubocvlogs]

👍👍👍👍💪💪