Building Coilgun - 3D printing case and assembling PCB
Vložit
- čas přidán 11. 09. 2024
- This is video of coilgun project.
Coilgun is designed in Fusion 360.
I will upload video of testing later, I have to test different voltages and settings first.
Music:
Tobjan - Memories
/ tobjanmusic
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: hypeddit.com/t...
Music promoted by:
Good Vibes - No Copyright Vlog Music bit.ly/2YAg2XI
Want to see the testing too! :D
I will upload testing later, after first tests i realized that 100V and 210uF is not enough energy.
Capacitors are rated up to 500 volts.
I have ordered 390V boost converter and i changed mosfets and diodes so they are rated up to 650 volts.
Also my coil is not very efficient so i had to change that too.
210uF@100V is only 1.05 joules + bad coil design, which wasn't enough to shoot projectile.
210uf@390V is 15.97 joules + better coil, i think this should be enough to actually shoot projectile.
I will make test video after i have fixed these.
Then I will be a subscriber and wait :)@@simplecad7462
This music is not it man. Use More of a relaxed beat. This shit helps me go to sleep.
:D I will try something else next time