Reclaim Printheads with a Manual Cleaning and Nozzle Test Chart | HP Latex | HP
Vložit
- čas přidán 18. 06. 2019
- Learn how to reclaim printheads with a manual cleaning and nozzle test chart on the HP Latex printers.
For other helpful videos go to hp.com/supportvideos or / hpsupport .
More support options are available at hp.com/support.
Continue the Conversation:
hp.care/SupportForums
hp.care/FacebookSupport
hp.care/TwitterSupport
#HP #HPSupport #HPLatex
SUBSCRIBE: / hpsupport
SHOP NOW: store.hp.com/us/en/
About HP:
HP Inc. creates technology that makes life better for everyone everywhere - every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE: www.hp.com
Like HP on FACEBOOK: / hp
Follow HP on TWITTER: / hp
Follow HP on INSTAGRAM: / hp
Follow HP on LINKEDIN: / hp
This video was produced by HP.
How to Reclaim Printheads with a Manual Cleaning and Nozzle Test Chart | HP Latex | HP - Jak na to + styl
Had the same problem on a HP Latex 310 where black would drop out mid print, new print heads where installed 3 weeks prior to issue. So I followed this video and worked like a charm. My conclusion is that it was a contact issue and that the printer will disable the corresponding print head as well if it detects a problem with one print head on the same color channel. Works great now fingers crossed. If you have a channel out I would try this tip before you blame the rip software or start replacing parts at random like I did.
Ink "retracted" from the printing side of the print head (essentially air was on a printing element). Happened to me (also black ink), fixed it with the good shake and lint-free cloth. It probably has something with Pressure, Volume, Amount, and Temperature of ink.
Good video and good advice although I’d recommend deionized water over distilled.
i have this same issue only have one black print head but its got me buggered not cheap either here in australia for printheads on my HP T730 every colour great black it went to go off on his own black sheep of the printer family . this last job if it got me through would of been ok but damm black sheep
anyone had your darks print almost black when printing the linearization chart? L26500... the CMYKLcLm chart prints perfectly.. trying to create a icc profile due to dark colors printing very black.. thanks
Exact same issue on a 365 and this solution worked great. Error code was 98:03. I didn't realize it had been four weeks since I had used the printer, and both black printheads had dried and clogged.
+Steenland61 Glad to know that the video has helped you fix the issue.
Why is my HP 570 latex printer double printing and fuzzy on the X axis ????
I am currently trying to resolve this exact issue but with the 2 cyans on the Black & Cyan print heads.....
Why not just do a normal test print? On our L260, it prints each head, and it is quite easy to tell if it's the Y or K in head 3 or 4, of the C or LC in heads 1 or 2, or M or LM in heads 5 or 6.
It's usually weird if one half of the print heads is acting up unless the carrier struck the substrate so hard it shredded up the ribbon on the print head. So if the CK printhead is completely messed up, that's the cause. Bit if it's just one of the nozzles on the same print head, that's gotta be something else.
We have trouble with expired printheads and inks. I guess we don't have a high enough volume in a medical setting. We do about 1200 posters a year. The Y/M is giving us issues and I removed them to do a cleaning. Now it won't test or recognize either of them.
While watching that, I started blotting my CK print head and I have no idea what crossed my mind but I just gave it a quick shake. Noticed only Cyan bled through and I wiped it down. Saw 'some' black bleeding through as I was cleaning up my mess so we'll see if I screwed this up entirely.
Okay. Yeah, that worked!
Hi Antonio, thanks for contacting!
We are delighted to hear that it is working!
If you need any help in the future, you can always get back to us.
Thank you for being a valuable HP customer.
Have a wonderful day!
Cheers!
Binu - Social Media Tech Support
On my HP Latex 365
Hi Alton, thanks for contacting HP Global Social Media Support!
I understand that you are experiencing an issue with the printheads.
In order to get this issue fixed, please contact our customer care team over the phone or chat for further assistance, as this issue requires Live conversation with you over phone or chat to isolate the issue and provide you instantly with appropriate solution or repair/replacement options available at your place as per the warranty.
Please feel free to reach us on call/chat, please access this link to select your preferred country and language option to reach us. Global support link: - www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Binu - Social Media Tech Support
Good day. I'm having a problem with my 115 printer. Do you know how to manually set the temperature for curing. My prints are not drying and the heat is too high. I tried the adjustments while putting however it does not cool fast enough before buckling. The rip shows a setting but it is grayed out and I can't adjust.
Hi there, thanks for contacting HP Global Social Media Support!
I understand that you need to know about manually setting the temperature for curing.
Due to limited support on this platform to fix this issue, please feel free to reach us on call/chat. Access this link to select your preferred country and language option to reach us.
Global support link: - hp.care/41YLUDS
Regards,
HP Support
the L260 is stuck on initializing? Turns on, goes through HP loading screen, then gets stuck on initializing with the hourglass spinning.
Hi there, thanks for contacting HP Global Social Media Support!
I understand that you are experiencing an issue with your printer as it is stuck on initializing.
I will do my best to assist you.
Reinstall firmware with flash drive (turn printer off, insert flash drive and turn it on). Follow instructions.. replace SSD if problem stays.
Binu-HP Social Media Tech Support
You saved my day with this video!!!! Thank you for sharing all your knowledge with step by step instructions so everyone can do it.
Hi there, thanks for contacting HP Global Social Media Support!
We are delighted to hear that you like the video so much!
If you need any help in the future, you can always get back to us.
Thank you for being a valuable HP customer.
Have a wonderful day!
Regards,
HP Support
I have an issue where greys are printing pinkish. Sounds like a very common problem from what I have been reading on a number of forums yet there seems to be little practical information regarding possible causes and solutions. Replaced all inks, performed cleanings, colour calibrations , nozzle checks, print head alignments, etc., and still greys come out pink. A solution to that would be helpful to many.
Hi James, thanks for contacting!
I understand that you are experiencing a print quality issue on your printer.
In order to get this issue fixed, please contact our customer care team over the phone or chat for further assistance, as this issue requires Live conversation with you over phone or chat to isolate the issue and provide you instantly with appropriate solution or repair/replacement options available at your place as per the warranty.
Please feel free to reach us on call/chat, please access this link to select your preferred country and language option to reach us. Global support link: - www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Binu - Social Media Tech Support
@@HPSupport I will do that. Thank you for the quick reply.
Thank you for being a valuable HP customer.
Have a wonderful day!
Cheers!
Binu - Social Media Tech Support
@@HPSupport Just spent 20 minutes on hold just to be disconnected. When I called back and mentioned that to the operator she stuck me on hold again for another 20 minutes. Not good.
I was thinking to myself there's no way they would disconnect my call twice. Duh, don't I look like the fool on many fronts. One for buying this piece of equipment. Two for buying it through the useless distributor that I did, and three...actually expecting to get some support. What an idiot I am.
We expect some real time practical troubleshooting not your lecture Mr. HP I don't came here for a class of kindergarten