Bro. When bleeding the cooling system your heater needs to be on full blast in the car. So that water can circulate outside and inside the car. And those headlights 😍😍😍 she's one beauty👌🔥. Followed this build since day 1 and will always continue 🙌.
You should bleed the cooling system to get rid of the small air pockets(little bubbles) in the system and it can only be done if the fan radiator fan is work. If the fan is not activated, the overheating issue will not go away. I had a similar issue with my citi life and abf. Alternatively bypass the fan switch and let it stay on while the motor is running to see if you experiencing a similar issue while the fan keeps the motor cool. If not then sort out the radiator fan first. By the way, that grill and lights are on point👌Goodluck👍
Mr late this car is totally insane...as we all know...I've been following this build from the time u had on the maroon doors....damm bru...tops my bru..keep it up
With Quality consistency like this, I 100% believe you can grow the "LateLateCustoms" CZcams channel in to an entire business model in the very near future. Keep up the grind and I promise you it will pay off in the long run bro 💯
Delaray goldwagen sells one that's made out of Ali I have one fitted and it's sharp if u need one let me know aslo easy way to bleed the system or what we do is take the return pipe out of the bottle leave the lid of the bottle of fill up that water system start the car and keep the return pipe in the lid Rev up little till the the water comes out smoothly out of the return then all air is out put pipe back in the bottle and close up
Looks good mr late late. The Jeep heads is horrible. Had a set in my Caddy and swopped them for Crystals. YT is one hot looking golf. N 16v with ITB's is the next step
Mr.late there by your temp sensor by the engine block open it when your pour in the coolant and pour coolant in that hole so it can fill up your radiator also just my way 😉
You should have taken those mini projectors out of the Jeep lights and retro fitted it to your crystals it would've looked juss and you would've had a way better directed light throw
Do these cars have a thermostat that fits on the block. Most newer cars have a thermostat and can't run without them coz the thermostat has a gasket which helps to seal the system
Hi Trust all is well for 2024. I m Tangeni from Namibia ( Walvis Bay) I bought myself a blue MK1 Rox 1.4I in December and I named her Smurfy. I need to buy her new sets of headlights. What do you recommend, crystal lights or the Jeep lights?
Drill a 1/8" hole in your thermostat, for the air pockets to escape. Problem solved engine running cooler. Always running a good coolant 100%, no water, water cause rust thats why water jackets don't last. You bought lights from mr. LEE. What did you buy from mr.Wang??🤣🤣
MR LATE LATE BYPASS UR HEATER CORE UR HEATER CORE MUST BE FLUSHED IF U MAKE U-PIPE BY THE METAL WATER PIPE U WILL BYPASS THE HEATER AND U WONT HAVE PRESSURE ISSUES...
100k subs people he deserves it 🔥
Just a sunroof Mr late late jorh
One of the best looking golfs in CPT 😍💯
This car has come a long way, well built man!!!! Keep it up, and keep us posted! 👌
Bro. When bleeding the cooling system your heater needs to be on full blast in the car. So that water can circulate outside and inside the car. And those headlights 😍😍😍 she's one beauty👌🔥. Followed this build since day 1 and will always continue 🙌.
You should bleed the cooling system to get rid of the small air pockets(little bubbles) in the system and it can only be done if the fan radiator fan is work. If the fan is not activated, the overheating issue will not go away. I had a similar issue with my citi life and abf. Alternatively bypass the fan switch and let it stay on while the motor is running to see if you experiencing a similar issue while the fan keeps the motor cool. If not then sort out the radiator fan first. By the way, that grill and lights are on point👌Goodluck👍
Ola my bricks needs to be pumped i check brick fluids is still enough what could be the possible reson for this
The yellowThang 🥺🔥
The crystal clears is always good bro. I have clears on my 89 conquest too and I uploaded one vid as well 😅👍🏽
Good decision going with the touch of chrome in the front.. Big ups on that. Mistakes happens dude.. dont be in a hurry.
Mr late this car is totally insane...as we all know...I've been following this build from the time u had on the maroon doors....damm bru...tops my bru..keep it up
Love your car buddy.. I still bought the old seats of the YT that time lol
Glad you went with the clear lights jeep headlights dont look good on a mk1, just a personal opinion not hating👍💯
You can't go wrong with crystals headlights #YT looking super hot with those headlights.
Literally watching the vid during loadshedding 😑🤣
Yoh bra the same here.. Eskom being a pain in the ass
Mr late late when are you going to start with the vtec
The headlights are sick bro the yellow thing looks beast bro 🔥🔥
Definitely worth it better then how it would turn out with the jeep lights this look is killa👌🔥
Inspiring me to build my own mk1 converting a 1.3 chico to 2.0 8v
With Quality consistency like this, I 100% believe you can grow the "LateLateCustoms" CZcams channel in to an entire business model in the very near future. Keep up the grind and I promise you it will pay off in the long run bro 💯
Beautifull car ĺove the lights and the music.Gòod luck.
Lights with grill👌👌👌 lol please just spray engine cover bolts black 👀
cant run on pure coolant.must be 50/50 water coolant mixture. coolant boils and hits the weak materials. i had the same problem welch plug leaked
Hand the same problem.
I had the same problem also
Yasis those lights though...job well done with the lights boss...the cooling system you will get right man...but super great content 💪🔥🙌💛
Love this back 2 back content
Totally worth it 👍👍
Change that plastic flange to an aluminum one, I changed mine and never had an issue since.
Delaray goldwagen sells one that's made out of Ali I have one fitted and it's sharp if u need one let me know aslo easy way to bleed the system or what we do is take the return pipe out of the bottle leave the lid of the bottle of fill up that water system start the car and keep the return pipe in the lid Rev up little till the the water comes out smoothly out of the return then all air is out put pipe back in the bottle and close up
Light looks great
Looks good mr late late. The Jeep heads is horrible. Had a set in my Caddy and swopped them for Crystals. YT is one hot looking golf. N 16v with ITB's is the next step
Mr.late there by your temp sensor by the engine block open it when your pour in the coolant and pour coolant in that hole so it can fill up your radiator also just my way 😉
That front is super fresh bro🔥🔥🔥
Crystal clear...awee
Can u pls make a video on how to maintain ur air suspension system or how to calibrate it
Mr late late I'm not sure but check the washer...the pipe that u said was much mor warmer than the rest check the washer
A drive on the new golf please
The YT looking on point 🤤🤤🤤🔥🔥🔥
Put a orange bulb in the indicator park holder
You should have taken those mini projectors out of the Jeep lights and retro fitted it to your crystals it would've looked juss and you would've had a way better directed light throw
Love ur car
And ur videos
When is the Honda blind starting
been an amazing journey with the YT bru i think its safe to say she is finally complete now bru finally done bru unless you gonna go turbo now LMK!!!!
🔥🔥🔥🔥🔥beautiful car and mods****can u please use the indicator spotlights with orange globe just want to see how it will look
Sorry to see the leaking. I know you’re going to get it right. 💪🏽
Buy the connection on the side of the block it also has a gasket dats causes da leak
Just put in the jeep headlights
Is the pipes swelling up? If it is then possibility is that the head gasket.
always use only water first pal, if cooling is fixed drain and proceed to anti freeze
Way worth it brother
That seal could be your culprit,,,,another one could be the thermo or a failing water pump
-Mr late late on top of things✌😎❤
WOW
Change your welsh plugs.
nice nice man
send me that link for indicator lights please
🔥
-Mr late late on top of things ❤😎✌
Coolant neck is busted bud
First thing I also noticed.needs to be fixed
You didnt wanna go with the Jeep like headlights those would look awesome
Can you please add a dictator on the yellow
Do you know how to raise the motor on a golf ????
Where did you buy the black 🐅
Whered you buy those crystal clear headlights, yasis it looks lekker
Just a sunroof please
What's the best coolant to use to prevent rust and keeping the engine as cool as possible
my bru just add one more item to the yt (a sun roof)
Where did you buy the hardware holding your fender on?
Change that fitting probably has a hair line crack and when the car heats up it probably gets bigger
Bro where can i get a wiring harness? I would like to rewire my mk1 need the complete vehicle harness.
Did you buy another mk1😳
Do these cars have a thermostat that fits on the block. Most newer cars have a thermostat and can't run without them coz the thermostat has a gasket which helps to seal the system
Mr Late Late, where did you buy your engine cover?
Welch plugs on the cylinder head must be replaced asap.
Bru how arw the crystal lights ? Are they better than OEM ?
Does anyone know how to bypass a citi golf immobilizer?
Stack upgrade?
I no we're you stay in stallambosch
Wat coolant are you using bru
Hi
Trust all is well for 2024.
I m Tangeni from Namibia ( Walvis Bay)
I bought myself a blue MK1 Rox 1.4I in December and I named her Smurfy.
I need to buy her new sets of headlights. What do you recommend, crystal lights or the Jeep lights?
I would recommend the Crystal or Oem headlights. Reason being, with the Jeep headlights the traffic officials has a problem with it fitted in a mk1.
Thank you.
Did you bleed the cooling system ?
First🥺🔥
Drill a 1/8" hole in your thermostat, for the air pockets to escape. Problem solved engine running cooler. Always running a good coolant 100%, no water, water cause rust thats why water jackets don't last. You bought lights from mr. LEE. What did you buy from mr.Wang??🤣🤣
Add the R badge to the grill bro...it will look tops
chee chee🇩🇪🔥🔥🔥🔥
MR LATE LATE BYPASS UR HEATER CORE UR HEATER CORE MUST BE FLUSHED IF U MAKE U-PIPE BY THE METAL WATER PIPE U WILL BYPASS THE HEATER AND U WONT HAVE PRESSURE ISSUES...
Great content always
Like share and subscribe 👆
I have two bagels for u for free
You engels accent is kak😅😅😅😅
That's what makes the video lekker 😅 Pure Englaans
The crystal clears is always good bro. I have clears on my 89 conquest too and I uploaded one vid as well 😅👍🏽