How to Remove and Install Injectors on Mercedes-Benz Engine OM 651 (Part 2) | W204
Vložit
- čas přidán 7. 09. 2024
- In this video, we'll show you how to complete the process of removing and installing injectors on a Mercedes-Benz OM 651 engine (shown on a W204 model). We'll cover tightening the bolts and nuts, leveling the injectors, reinstalling the adapter wiring harness, and completing the process with StarDiagnosis.
===========================================================
Type: W166, R172, W204, C207, W212, X218, W221 with engine OM651
ML-Class, SLK-Class, C-Class, E-Class Coupe, E-Class, CLS-Class, S-Class
hello there
I replace my old defective injectors with new one. shell we need to program it like in the Video?
if I didn't program it what will happen it ?
thanks
Sow something happend to your car?
@@cornelgherghita2828 hello again . yes. an old injector causes me problems always even are new it causes problems ( one cylinder not working, smoke light blue because of the misfiring).it's happened at the beginning of starting the engine either cold or hot weather
I searched on youtube and I found upgrading these old injector types with new different types of injectors. of course, this upgrade needs to change the ECU, which comes with program Code 0O7 and return hoses of fuels.... els.
in the end, I made these changes and the car worked fine.
after 2 years I start facing another problem but is not deal with changing injectors.
The problem is I have leaked air in the vacuum system which operates vacuum units ( Turbo actuator, EGR , water pump).
I checked the Transducer valve for all unit vacuums nothing observed any leak even hoses I didn't find any air leak.
what is left to check the line from the vacuum pump, the line of the brake system, and the receiver tank.
if you want more details and picture I can provide you throw my personal e-mail.
best regard
Musa
So, it's impossible to swap out an injector if you don't have access to the MB software?
Yes
You will need at least a decent scan tool