Making an external monitor from a laptop screen - Reuse old lcd panel/old laptop screen
Vložit
- čas přidán 28. 07. 2020
- This is my new diy external monitor for my smartphone and PC
+ The panel was taken from the asus laptop screen (my laptop's mainboard is broken but its screen is still very good, can be reused)
+ Lvds LCD controller board is ordered online
(e.g: Universal LCD Driver Controller Board
s.click.aliexpress.com/e/_9GDZkP
s.click.aliexpress.com/e/_9J37kJ
s.click.aliexpress.com/e/_A4ZSpH
s.click.aliexpress.com/e/_ArLEnp
amzn.to/3vPi2Zj)
+ The power supply is 12v 2A
+ The cover is made from foam then painted white
+ For someone need a Type C to VGA adapter: s.click.aliexpress.com/e/_AKw5ut or s.click.aliexpress.com/e/_AXZFUl or s.click.aliexpress.com/e/_98b6Fn or s.click.aliexpress.com/e/_Adq7Mv or s.click.aliexpress.com/e/_9hxmc1
from amazon: amzn.to/2ZhQkZS or amzn.to/3b3jKhm or amzn.to/3Eczs6j or amzn.to/3vC9VjG
The end result is great, so I want to share it with everyone :)
-------------------------------------
Watch all of my videos here: / bakidiy
-------------------------------------
Please subscribe my channel for latest video. - Věda a technologie
Wow! I just made an old screen alive again and was trying to look for a good "frond end". Just found it. Thx!
beautiful job just like you
Excellent build!!!
very good idea, thanks for the tutorial and it's worth a try
Very nice build. Thankyou
Just what im looking for. Thanks for the upload. Gonna ask if a illustration board will suffice
Please send the website link of buying ctrol board and power supply board with connecting cable
Hey I was looking to do the same I know it’s been a while since you posted this but I’m desperately trying to find out what I need to buy I want the touchscreen aspect of my screen to work or does it work with just the controller or is there another product
I'm going to try this.
Great work, This helps me lot for making second screen of laptop......
i used the laptop to fix the laptop
Great work!
Which cellphone do u have connect with moniter ...several phone have type c..old version does not support otg screen mirroring
Amazing monitor 👌
Is it needed to make lvds pin according to the datasheet to make connection with universal lcd controller board to 14" laptop lcd (accer aspire 4715z) to run ?
Great idea!
Iv been trying to do the same with a non functional portable DVD player screen for my Chromebook after the screen broke bat stuck at a stop point of what wire goes where
Great build, have had this in component form for a while as I wasn't sure how to enclose it.
Im really liking your method, what kind of foam did you use???
That's 5mm foam board for crafts, framing, modeling,...
@bakidiy can u please tell me what are the components u use bcos I saw there is 3 components that's why can send me the link or component model
Hi i have got my screen running off batteries do you know how i can use a firestick with this but also running off batteries thanks
Nice video man. I've done the same but yesterday my screen turn white. Do you have any solution?
Hello, what materials do you use for the frame since it is very easy to make, thank you
Can this project be done using old android phones display?
how did you connect the mobile to the lcd screen? can i know the convertor which you have used?
That's Type C to VGA & HDMI adapter
Can an old car radio touch screen be used as a touch screen for a broken phone display?
Amazing, I was wondering if i could use my old portable dvd player for the same...is it possible?
I think yes if you wanna use it just look to the back and search the serial number I think to any shopping apps like eBay etc. The reason you need to search the serial number is for the control board.
Good job!!! Thanks!!! :)
how to get a suitable board for screen?
How do you get the phone to work
@bakidiy I appreciate what you did brother I have one question, if your phone got battery low you will remove an charge it.?. or while its working it is also charging?
My type C to HDMI adapter doesn't support charging the phone while in use. If you want to use it while charging, just buy a USB C to HDMI cable/adapter with charging port. It has an extra Type C port used to connect the charger.
@@bakidiy thanks buddy
vraiment cool merci beaucoup
Great build. 03:05
Stupid question. Can this be done without buying a controller card??? Ie alternative methods?
Tune reminds me of London Grammar, Strong
wow my old broken laptop is like yours in the video and i am planning to reuse the lcd too hahaha
Wish you success with your plan :)
hello.. i made my own DIY screen following your video...but i got a little issue with controller board...could we please connect if you can solve my board related issue...
What song is plaYING ? Its a lonmg song sounds like but a part of it i guess is arround 17:20 ish
Great work. But for the cost of Controller board we can buy a new monitor nowadays
I can't find the controller board. This is the model no LP156WHB-TPC1. Can anyone help
ang galing =)
Nice. Why didn't use the 3D printed parts?
Very..very. Good....
Try v59 universal LCD controller
great video sir but i search on youtube LM133LF1L coded screen dıy turning monitor .... what is this monitor code ?
Lvds LCD controller board from where ?which location or wab
Aliexpress
Great build! Do you have to flash a firmware to the universal board for the lcd?
No need to flash firmware, just set suitable LCD panel resolution via jumpers on the board.
@@bakidiy ok thanks
Смотря какая плата, в одних можно обойтись перемычками в другие нужно залить прошивку
Excuse me sir. Can u please tell me what kinda material is of that white sheet. Unable to find out
Please please please please please please please please please please please please please please please please please please please please
I bought a vga to usb-c but not working how do i solve😢
Are the controller boards from the laptop that you got the screen from not useable?? surely they can be disconnected unless they are part of the motherboard
I'm guessing it's needed since most laptops only allow output from the hdmi ports and have no input processing components
Love it
Wonderful. Plz what's the name of the white substance you made the vehicule from?
PVC foam board
What size is this?
Where did u get the foam board?
To me it looks like the material used to make signage called Foamalux.
How do i know if the monitor screen works as it's not connected any laptop
Connect the controller board to screen, press power on then press controller board's menu button , if the menu display on screen so it's work correctly :)
What's the purpose of exposing wiring
I am from nepal can you provide me sony vgn cr490 lcd universal lcd controller board
Pichhe Power Bank laga hai kya ???
nice
Someday you should using old ISA PCI graphics card as alternative to "online bought lcd controller"
How, what do you mean, is there other way ?
How to make monitor from the smartphone LCD?
I want parts links bro
Do you think touchscreen would still work?
No, this is just a regular laptop panel, no sensor here
Stupid question. I have an old laptop that has been sitting in the corner of my room for two years now, I don't use it anymore because it just shuts down and won't turn on anymore. How do I check if the screen is still working before buying the necessary component? I don't wanna spend money on something that won't work in the end.
trial and error, 1st try a good hdd/ssd and boot it from the said laptop. If the laptop boots up, only hdd/ssd/os was faulty, try formatting the old hdd/ssd. If the laptop doesn't boot up after changing the hdd/ssd, try changing ram/s. Another possible cause was the power adapter, also try other adapter. If you got no luck after all this, the motherboard was faulty and it's expensive to repair
do this monitor still work? i did build one of this, the bottom part of the screen is hot, is it normal or should i buiild a cooling system?
It has been working for 2 years, from 8 am to 9 pm every day for the surveillance camera system, and it is still working fine. I didn't add any heatsink but everything is ok.
Okey thank you very much, hopefully it'll last long..
does this work on any lcd unit? i have an lp156wh4 screen from an old dell laptop and wanted to know if it can be used with this
@@bakidiy can you suggest a board? I have a LP156HW4 TLB1 screen! I have been racking my brains and losing my mind finding it out!
I just checked the datasheet of your LCD, it uses the same LVDS signal as my panel, but uses a led backlight (not CCLF backlight like mine). Therefore, the connection cable is not the same. You can buy this board but use another cable that supports led backlight + a led driver. I think it will be more complicated for you than buying a board for led lcd like this: www.amazon.com/VSDISPLAY-Controller-LTN140AT02-LP156WH4-B156XW02/dp/B01NGZHVGA, or just search "40 pin lvds controller board for led lcd"
@@bakidiy alright! Thank you for your time! Will keep you posted on how it went. 😊🙏
@@bakidiy bro which lvds kit is buy for Lenovo G50 80 screen
Do you have the link where you bought the controller board?
Just search "MT561-MD board" and after buy it, remember to set the output voltage to 3.3V if you have the same LCD panel or your LCD will be burned (there're 3 output level- 3.3V, 5V, 12V, so you should read the LCD's datashet to set right voltage)
@@bakidiy does this bord works for any laptops lcd panel?
It can use for most of LCD panel that have 40 pins LVDS connector
Please send the website link of buying The controller board and power supply board
@@bakidiy I appreciate what you did brother I have one question, if your phone got battery low you will remove an charge it.?. or while its working it is also charging?
Hi, I have old laptop screen with model ltn140at07
Can i use the same lvds controller board as mentioned in description?
Yes but you need to buy with led driver instead of ccfl driver (or CCFL backlight inverter) because it's uses LED backlight, not ccfl backlight
@@bakidiy how to buy with led driver. Do i need to contact the seller for it or there is diffrent product?
Buy a 40 pins lvds controller board and buy led driver separately like this s.click.aliexpress.com/e/_AK2TUF
There are many sellers and different prices, you can choose the cheapest one
Or s.click.aliexpress.com/e/_ANdLU3
Please add accessories buying link
Hello, has anyone already tried the experience of transforming an iPad screen into a 2 screen? I have a 1st generation iPad Air. The screen is perfect but the rest is out of order and I would like to transform this screen into one. auxiliary model.
Are you using power bank behind screen ??
The board has a 12V DC connector so I use 12V adapter
Great job.
Improve your work:
1. Hide all the cables using a bigger cover.
2. Instead painting use adhesive vinyl of the color that you want.
Indeed. A large back cover to cover all the PCB and cables is a better design, even though the devices are low wattage and emits small amount of heat, trapping them in such a confined space is a bad idea for longevity (guess why the monitor/TV manufacturers are designing their products this way?). Also, this will make the device more serviceable in future, and looks more elegant.
Adding hinges to the stands is also a better way, as you can fold the stands for easier storage (like put it in backpack or a luggage).
Also, since you have a DC motor drill, why not swap the drill into a sander bit to sand and smooth the edges? Or just use ordinary sandpaper.
What price this board.?
You can get this in any stationary
can we connect desktop with this
Yes, like any other monitors.
I LITERALLY SCREAMED @ 2:45
Why?????????
Whats the foam board thickness?
5 or 6mm, defend on your LCD panel thickness
@@bakidiy dude. Thanks to you. I think this is the most basic case from multiple references i watched.
Is this touch screen ?
Background music?😮
👏
how thick is the foam? its pvc foam right?
Yes, 5mm pvc foam board (depend on your LCD's thick)
@@bakidiy sheesh already buy the 3mm :(
mine lcd panels same as yours
😃 double it and you'll have 6mm. 5 or 6mm is ok
@@bakidiy thankyou for making this video, im already done with the monitor placing, yet still hard to make a hole for interface button :(
good videos. thanks❤️
broad ka pata kese kar sar
What is the model of your Smartphone?
HTC U11
Will this module work with every laptop screen?
You need to check the datasheet of the laptop screen, if it uses LVDS interface then you can use this module. You also need to see if it has a 30 or 40 pin connector to choose the right connection cable and see if it uses led or ccfl backlight to choose the right backlight driver board.
@@bakidiy how bout i send u picture of laptop back.. can i do that?
Every laptop panel has a sticker on the back, you need to read it and comment the panel code here e.g LP141WX3(TL)(N4), me and others can help you find the right module.
LTN156AT35 LVDS 40-Pin 1366*768 15.6" HDMI+VGA+2AV controller drive board ------------> I need this ,please send me the link to buy it ... need delivery to india
What screw size u used bro?
Thanks before
It's M3x20mm screw
How much mm to the foam ??
5mm board
@@bakidiy that is illustrations board?
Dude. Show the finished product in the beginning....so that it could keep people interested how u did it??
The mystery is in the making.. I will see it eventually. Stop telling people what to do. Relax. Take a chill
What is the name of the board
The one you cut
That's foam board/PVC foam board
Bro could we play games anything?
Why doesn’t anybody uses the laptop’s own screen chassis?
It will give a more “off the shelf” look.
Im glad that im not the only one with this idea.
That's also a good idea but my screen front cover has broken, so make a new custom cover for the panel is both necessary and interesting :) Making a new case will make it easier to install the controller board and stand, as well as make the product more professional if you are skillful.
Name the parts u used ...
Everything needed and buying link are already listed in the video description.
Awesome project but delete the music
5:83
7월25일수요일
buatin video tutorial yg lebih jelas bg
Ama bu kusura bakma ama bu sefer çok seviyorum ve❤
led ka
Good god the 'music' on this video is hidious.
You could say somethings.... Atleast
I wonder why most videos on technical subjects just show pictures along with incessant,loud and useless music. Why not give text information if you can not add voice?
I agree I don't know what component this guy using basically it's hard to understand
20 - 30 dolar ,a ben süper monitör alırım böyle uğraşmaya gerek Yok. O kontrol kartını kendin yapabiliyor musun sen onu haber ver
It cost me only 5 dolar for the controller in my video.
The price of the controller is high, so it is useless. Just buy a pc monitor.
I only spent 5 dollars for this control board, but there is no screen for 5 usd
Terlalu lama vidionya bertele tele🤯
please send the website link of buying ctrol board and power supply board with connecting cable
Can I turn the phone screen off while using the external monitor to save phone battery?