How To Fix Broken Samsung Range Oven Knobs
Vložit
- čas přidán 22. 08. 2020
- Here's how to fix or repair your Samsung Knobs when they break.
Samsung Range: NX58H5600SS
Due to factors beyond the control of megalodon1, we cannot guarantee against improper use or unauthorized modifications of this information. Megalodon1 assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Megalodon1 recommends safe practices when working with tools seen or implied in this video. Due to factors beyond the control of megalodon1, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not megalodon1. - Jak na to + styl
Awesome fix thank you. Never buying Samsung again after having to replace a fridge in less than 3 years- then this.
Many thanks for offering a simple, cheap and effective alternative to paying from $80 - $110 a piece to replace several broken Samsung knobs used on the NX58H9500 model, for which only OEM replacements are available , unlike other models where cheap alternatives exist.
Really glad to help, appreciate your feedback and thanks for watching.👍
The best compliment I can receive is subscribing to my channel, it's free and I might save you even more money in future how to video's.
I had the same issue, so I was able to find a set of 5 brand new knobs on Amazon for $27. They did have cheaper ones, or you could buy one, two, three, or four depending on how many you needed. I have a warranty but knobs were not covered and my first one broke a week after I got the stove brand new from Lowe’s. The warranty tech told me the cost of new knobs from Samsung would be $268 dollars for 5 of them but my stove also has a 6th light switch knob. The light switch know alone costs $69 dollars more. The problem is if I bought them from Samsung I would just receive the same weak plastic knobs that would just crack and break again. However, the knobs I got on Amazon have an extra METAL piece surrounding the plastic base to reinforce it. So other companies fixed Samsungs knob issue.
In the mean time I did a similar fix except I use JB weld and a piece of 16 gauge wire twisted around the broken piece. I hope this helps others.
could you share the knobs you bought in amazon? I have bought 2 pairs and neither fit!
Thanks! I just repaired all 5 knobs on my Samsung stove using your technique and you just saved me some money for replacement knobs!!
That's awesome, thanks for watching.👍
Yes, genius! I was looking for small pipe clamps, but they don't make them that small--didn't think of zip ties. BTW, you can put less stress on the knobs by removing the lead weights while you're at it. Amazing that they go to the trouble of putting weights in there to make the knob feel like it's quality, when in fact it's just cheap plastic. Anyway, thanks for this great tip!!
Pure genius, thanks! I initially set out to fix one knob that was loose and obviously falling apart but then discovered the other 4 knobs were also cracked. Shored all of them up with superglue and zip ties. You definitely saved me some money!
Oh my goodness, thank you!!!!!!!! My 10 month old Samsung range just had a knob crack and when it was in the off position the knob showed 8 instead of OFF. I can't believe they made such cruddy knobs! You're amazing, thank you!!!!!
Happy to help out Marguerite, I appreciate your feedback and thank you for watching. All the best.🙂
I wanted to thank you for this video. I used your repair technique on all my stove knobs. It was such an ingenious and easy fix, and it saved me so much money (and stress).
That's awesome, glad to help and thanks for watching.👍
Exactly what I did right before I saw your video. Saved $80 for a new knob.
Great minds think alike.👍
$130 for ONE KNOB. Are they insane? Thanks for the video.
Money saved is money earned, glad to help and thanks for watching.👍
Or people can call the manufacturer and get a new knob. This BS should never happen to stove knobs, they knew it was defective, but didn't recall them. Apathetic doesn't help these companies push to maintain quality, only direct complaints, and maybe even class-action suits do.
Sounds as bad as the Nintendo Switch controllers. Similar issue. Cheap plastic that keeps rubbing down the inside of the controller.
Great idea, thank you. I bought a New set, making sure it was metal inside, but the fitting was a bit to small, and is imposible to messure or to find the stove model, but with your idea they all work again. THAKS
Your video saved me a nice chunk of money. I did what you suggested and it worked like a charm. Thank you so much.
That's awesome, so glad to help people not get $crewed.👍
Another way to secure the broken knob is to us a .45 acp brass casing. The internal dimension is a match to the out size dimension of the knob shaft. Cut the primer end off and slide the tube over the broken knob shaft. You could glue if you like but not necessary.
It worked perfectly! Thank you
Awesome sauce.👍
That wasn't my problem, but the video was genius!! Will definitely keep it in mind.
I tried it. Seems to be holding. Great video
Thank you. I was about to send away for new knobs $$$$.
Glad to help, thanks for watching.👍
Thank you so much for the easy fix tip!
Sure thing.👍
Thanks worked like a charm !!!!
Bruhhhhhhhhhh... What a life hack!!!! Thanks!
I’m doing this to my two remaining knobs today before I end up with zero working ones. They are all broken, but two are still just cracked.
Where can I get the sleeves that insert into the knobs?
You have to buy the whole thing. It was $27 for 5 on amazon when I got them. Make sure you get the upgraded version. search 'upgraded samsung stove knobs'. Another above person said 45acp shell casing will work if you want to cut it down. I used a scrap piece of tubing that happened to be the right size with epoxy to make it stronger. fill the insides solid. When the 3rd one broke I just bought the set. So far so good.
you're a hero.
Lol I did the same except crazy glue. We both think alike.
Genius, Thank you so much
Ok. So the knob is broke AND the valve is bent. Will it still work correctly once we do this to the knob?
This method will work if there are no missing pieces that need to be secured by
zio tie and super glue. Now if there are chucks missing than this video won't help and you'll need to buy replacement knobs.
Thanks for watching and good luck.👍
Thank you 🙏
The nob on my Samsung oven works on all the other ...the stem shaft won't turn...??
Finally seen this after all mine broke off, so not kewl Samsung:/
Thanks
Genius!
Thanks 🙂
May just do this as a preventative measure
Smart 👍
Impressive guide! Instructions are easy to follow. Check out our selection of Samsung parts.
Mine has broken also. The reason is something gets stuck where i cant turn the knob
Good video that coincidence we have the same name jsjs I hope you do not mind that there are 2 with the same name :)
Had my Channel name since 2006, but nonetheless great name. Thanks for 👀
Megalondon1 is the CEO of DIY😂
But honestly great channel❤️
I can See You Yo watching and becoming a Pro.🇺🇸💪👊👍🇺🇸