Thermal Paste Accessories 101: Everything You Need to Know
Vložit
- čas přidán 15. 05. 2024
- reviewing the most common (and least common) thermal paste accessories I've come across and chatting about their usefulness!
check out my YeesterPaste thermal paste and accessories! www.yeesterpaste.com
links to all other thermal pastes in this video:
Arctic MX4: amzn.to/3JfbZHj
Cooler Master Cryofuze: amzn.to/3kKOQ5h
Thermal Grizzly Kryonaut: amzn.to/3DiAzTM
Corsair XTM50: amzn.to/3XZbUM3
daily tech tinkering entertainment: www.tiktok.com/@mryeester
0:00 Intro
0:13 Spatula/Spreader/Shovel
0:44 Thermal Paste Finger Cots
1:25 Card Spreader
1:51 Thermal Paste Paintbrush
2:20 CPU Guard
2:51 Practice Kit
3:21 Tube Holster
4:04 COMBINE THEM ALL
As an Amazon Affiliate I may be compensated for purchases via the above links. - Věda a technologie
The thermal paste finger Cots is a whole different story
Oml
@@gibbyhale4217 ikr
When I worked at a restaurant we had those for if we cut ourselves while working. Even with a glove/bandaid they still had us wear them as a safety precaution.
Extra small con-
@@mohameddarkaoui2636MRBEAST
"honey, hold on we need protection im just gonna order some thermal paste finger cots, dont worry its average"
Something about your specific thermal paste that gives me more trust in it. I'll consider getting your kit.
Nice. Personally I use a k-tip as spreader. Cut one end and hold it by the other end firmly. After putting a little bit of paste in the middle of the CPU, you roll the k-tip in both directions to cover lightly but evenly the entire CPU heat spreader.
finger cots are very useful to have around for extra grip on small parts or to keep fingerprints and oils off of things
Can you compare the thermal conductivity of your thermal paste and others ?
I use the spatula to scratch off the dried thermal paste when reapplying more
*What's the Most Useful Thermal Paste Accessory?*
- Easy, the "human fingers".
*Why?*
4 Reasons:
1) Everyone have at least one
2) They can be improved by use them everyday
3) Cheap (litteraly free)
4) Natural movement, so you don't need a special learning
I love the spatula its more easy apply evenly if u dont know stuff very well like me
Where to get the finger cast i need one for my uhhh
Finally, a proper fit
I've always wondered if you could get better thermal transfer of you pulled the metal shield of and had the paste right on the chips and the heat sync right on that (no shield at all)
The metal shields real name is IHS (Integrated Heat Spreader) When you remove the IHS you reveal the CPU die or dies. so when you then cool the dies without an IHS it is called Direct Die cooling.
Search: "Delidding CPU".
is there uhm lubed up finger cots? just so its easier to get on..
Super video. 😋😀
What happen if you short out the motherboard power pin longer (before you turn on the pc).
As in your dog sit on the power button without releasing it? Will it damage anything?
thank you for finding those "finger cots", i have been looking for something like it for a long time now
although is there a smaller size? those seem a way too big for me
i am taking this out of context
Day 27 of asking: could you do a thermo paste with a combined dot-cross. I feel like the dot doesn't reach the corners and the cross misses the areas in between the corners. Very curious what happens if you combine them. Thanks!
Wondering if the idea behind the brush is to apply a very small amount of thermal paste such that direct contact it allowed where the micro bumps make it possible.
For my first pc build I'm buying your thermal paste kit!
I swear you wont need it. Save your money brother.
Don't waste money on a "Test Kit", if you really feel like "testing" just use two old plastic cards and throw em together, same results after removing them from being squished together.
And even that is totally unnecessary, because as long as you have a decent paste (MX-4 or something like that) just put a small blob in the middle and you're good to go, you can't actually put "not enough" thermal paste onto it (even a rice sized dot is already better then nothing / probably enough).
The plastic thermal paste "applicator" / spreader or pad reminds me a lot of the verge
"Some tweezers to tighten up the wires"
A swiss army knife that hopefully has a screwdriver in it
I'm pretty sure the finger cots are just defective condoms that found another use in a completely different category
I’m a big fan
@2:45 triggered me with the Past in the CPU Socket lol
question --
how much do u spend a month on thermal past?
What happens water cooler fill with liquid nitrogen and overclock the cpu to maximum??
The cots or spattys would be useful for spreading thermal paste on directly on the die, because any air caps are deadly
Hello, sir. I hear a sound that coming from my hard disk laptop, it sound like scratchy sound, is that mean like broken or booting up?
Spatula is really useful for Ryzen 7000 if you want to cover the entire heat spreader
Same for every CPU
How much is a good p.c entry price?
1:00 I can guarantee you ONE GUY confused the two.
I use that lil shovel for my kief. uwu
mine is small.. I think that second thing fits
Zalman termal will be the best!!!
Wallpaper cutter to cut off the required piece of PTM7950 to apply to cpu and gpu.
What about a gold plate
Nice vid watched it all
Imagine your mom is watching with you and she sees finger cots
thermal paste is good
So price excluded what have you found to be the best thermal paste? Not including liquid metals
only gonna plug yeester paste
thermal paste cots are basically just free co-
cks.
my cpu chillin with a thermal pad: 🗿👍
any testing with your thermal paste? i want see temps :)
Anyone else notice the spaceballs shirt?
Weird idea! For cooling a cpu (or whole pc) what would happen if you put the pc in a mini fridge for extra cooling? 🤔
Moisture.
Why we use it
Videoo!!!!!
Tube Holster and Practice Kit .. how to get more waste of materials, that noone ever actually needs (because I for sure will not hand my Thermal Paste onto my PC when I can just keep it in my drawer for free).
Vaseline as thermal paste please
Thermal pastes gets all over my hands anyway
Fill a bathtub full of thermal paste!
What happens if you put food colouring in thermal paste lol🎉
I am the second
Just forget to post this
So i did it after i watched the video
Day 23, cement as thermal paste
Use slime as thermal paste
Day 70 of asking for molasses as thermal paste
I keep the finger glove handy all time
A pack of 4 for 69 is just to cheap
Please mix thermal paste
The finger condom☠️
just put a little dot
Squirt... Done...
No need to turn thermal paste into rocket science.
Thermal cc😁😁😁
Use Nutella as thermal paste
Guess I'll buy less corsair
OhThermalPasteImma1st
FIRST pin me
Edit: why did i get a like i was not even first i was second
Nvm
THATS A CPU GUARD? I PUT IT ON THE AIO WTF
I wonder if there is a block frame for generic CPU or GPU shapes that is like a cutout, and there is a special pressure card that has a special molecular structure on the surface that denies the thermal paste from sticking to it, so you push it down and it spreads it out then you lift it up and no thermal paste is left but you keep the shape.
The corners of the CPU/GPU is what generally does not spread to, and can help a tiny bit if you covered the whole surface.
I wonder if it's necessary to sandpaper the surface of the IHS a bit or the heatsink, to make the thermal paste cling to both sides and make it flatter when it's pressed?
hello
thermal paste hanger is useless and the transparent practice card is just wasting paste
11th!
Woah! I’m the first viewer
785th
If u have finger on ur hands congratulations u dont need anything else
First
Please bro request Please give me graphics card as gift because I have no money for purchase this is my dream
Et ? Vidéo teste de pâte thermique très pauvre. Aucun test. Aucun intérêt. Vidéo pour la populace qui n y connait rien.
First