Programming Chamberlain KLIK3U/LiftMaster 375UT To Genie Intellicode Or Overhead Door

NOTE: This can also be a replacement remote For Your Garage Door Opener/Reciever That Has A learn Or dip/code switches. VERY EASY To program It might be a little tricky with the code switches. But Here In this video I show you how to program this remote To A Genie/Overhead Door Intellicode Motor
Step 1 Slide the cover off the remote.
Step 2 Press and hold the Black program button inside the remote.
Step 3 Locate the learn button by finding the antenna On the motor It can be in different places Depends on what motor you have
Step 4 Press Learn Button ONCE (Light starts flashing)
Step 5 On Genie/Overhead Door Motors It Takes to 5 or 6 pushes
Step 6 After 5 or 6 pushes once the learn signal light starts flashing STOP THERE!! DO NOT PRESS ANYMORE! This can cause failing If it fails you will have to redo the whole thing.
Step 7 Press The Programm Button On The remote. (Light On remote Shuts off.)
Step 8 Press The remote button (Learn signal light shuts off indicating remote is programmed If it flickers It May not receive the remote).
Step 9 Test Remote If it works There's nothing else more to do but Test your remote ALWAYS TEST!
www.google.com...
www.chamberlai...
I hope this is helpful. And check back soon And Subscribe And well see you next time Thanks for watching.

[@autopartrandomness]

HUGE Help!! I hate dealing with these things. Thx for the VIDEO!!

[@emilypatterson2995]

Omg!! You just saved my life with this video lol! Thank you so much! It worked🎉

[@nancyswirsky9061]

Thank you. I can finally use my opener thanks to you!

[@johnsgaragedoors2058]

Always here to help!

[@yokospivey5310]

I wasted so much time before finding your vid, lol. Thank you!!

[@alonzoalatorre6657]

Thank God you had the same exact model as me!! Thanks! 😁

[@brendasoto2597]

¹q

[@jambro1583]

6 clicks whether the red light flashes are not save by clicking program button in the remote then it worked. Genie pro

[@VinceCourtney]

Thank you. Clear and easy

[@jasonrocha4278]

Thank you! My phantom overhead was similar 6 clicks

[@kennyw7033]

This was perfect thank you!

[@nadiarubio2912]

Thanks for your help!

[@pbarnes8952]

Thanks for your Help...

[@silkiaalopezrosario1128]

Thanks!

[@aaronholmes6910]

I have the a pro max opener and am using a chamberlain remote, looks exactly the one you have. When I program the remote it looks like it works but the door doesn't move. When I hit the button on the remote I see the learn light flash but the door doesn't move. Any ideas?

[@clarissaharris5345]

Mine does the same :(

[@aaronholmes6910]

@@clarissaharris5345 czcams.com/video/-w3u4fdU0-Q/video.html

[@aaronholmes6910]

Followed this one and got it to work

[@milirotar]

I’m doing exactly what are you doing and no response, I have a genie intellicode