Programming Chamberlain KLIK3U Universal Garage Door Opener with Overhead Door Brand Opener
Vložit
- čas přidán 21. 08. 2024
- Programming Chamberlain KLIK3U Universal Garage Door Opener to work with with Overhead Door Brand Garage Door Opener
If you'd like to support this channel, please consider using this Link to clicker on Amazon:
amzn.to/2T2PUiG
Your video is SO MUCH BETTER than the company’s video instructions. Thank you!!
I nominated you for a Nobel Prize based on this video. Brilliant!
I finally turned to the internet after the instruction manual was no help. I watched several other videos, which were not helpful and this did the trick! Thanks!!
My battery died and remote quit working. After replacing the battery, your video was only one that worked. You rock!
God Bless you!! I was so frustrated and could not figure out how to sync my universal remote to the opener. Upvoting you so that more people can see!!! Thank you so much!
I have been reading the website, going over different instruction manuals on line with no luck. then I watch 90 seconds of your video and have it working right away. I wish Chamberlain's just showed us your video to start off with!
Thanks!
Me too. Only needed for minute or so
I watched 4 other CZcams videos on this and none worked. Your advice to wait 2 seconds or so after programming was key. Thanks for the great detailed explanation!
Great job. The provided instructions missed multiple steps but you were spot on. Thank you. You showed how amazingly easy was to do this. You removed a ton of stress and probably a needlessly returned product.
Agree with the other comments - this is the best video for re-programming the Chamberlain universal remote. Thank you for posting it!
oh my goodness!!! I looked through google, the garage door opener manual and the remote manual, NOTHING!! Thank you so much!!
Finally - I found a video that described exactly what to do to set the remote in my car. I was following incorrect directions until this video showed me what to really do. Thanks Brad.
Thank you ! Your video is the ONLY one that has that key last step otherwise the thing doesnt work and that is not in the manual for the universal remotes!
Well done! Both Chamberlain & Overhead Door instructions were missing some key steps that you found. Thank you very much.
Yours is the ONLY video I found that shows how to program this! Thank you!
THANK YOU, you two are a life saver, and time saver!!! I watched 6 different videos on this and no one had this opener matched with this remote. This was so confusing and atypical. I thought I was good with stuff like this. Obviously, I'm not. Thanks again for your help.
Thank you so much for the excellent video. I am 68 year old female and your instructions were easy to follow. 2 Repairman quoted me $175 for a job that took only 5 min. plus the price of the remote (29.99 + tax).
Omg!!! You are a lifesaver!! I almost returned it!!
Omgosh. Ty. I've read instructions and watched videos until I'd about given up. This worked!
THANK YOU! I sure appreciate you taking the time to show the rest of us! Woohoo! I finally got ours to work, too.
Very helpful man! I went from frustrated as ****, to feeling like I could now remodel a house. You should make inspirational videos. 🤓
too funny :-)
Thank you! I watched three other videos before I got to this one and as soon as I follow your instructions, Bam! The garage door programming worked and opened effortlessly.
Thanks your directions worked spent an hour following instructions from chamberlain Thanks 👍
Thank you very much!!! I followed your steps and my opener worked great with my garage door! Many thanks 🙏🙏🙏
Ooh my God I don't have wording how I say thanks to you ...
I buy this Remote one years ago and finally today fix after watching ur video
Thank you so much. I watched several videos and this was the only video that programmed the remote to the garage.
Like others after reading directions, looking through manuals and watching countless other videos was the only one that work and it was because of the wait, the press button and then press button to open/close. Thank you, thank you, thank you.
Brilliant! Worked the first time, after spending a couple of months trying. My first Klik3 required a new battery every two weeks. So, I bought another, which I could not program. The final 2 clicks are what did the job; they do not show up on the instructions. Thanks!
Thanks!! Couldn’t get it without this video lol
Thank you! The instructions with the remote are useless. You, however, fixed the problem within seconds!
Yes this was a well instructed video, i kept following the instruction on the papers and could not get it to program til i watched this video, and this was the first recommended video in my search
Spot on. You discovered the magic juju.
Thanks, Brad!! This was the best because you must have a Legacy 850 opener like mine and for whatever reason it is the most tricky opener to program.
This was exactly what I needed. Thank you, thank you, thank you.
Excellent instructions! Thank you.
Thanks much! Worked perfectly! We're back up!
My solution: Hold the remote further away from the opener!
I had trouble where it would recognize the 6th click (solid red on the opener) but it would never 'confirm' it (red light off) after saving the programming on the remote and clicking it again. I tried it 10+ times and reset all learned codes in the mean time.
What made it work for me was moving the remote further away from the opener. Once I had it down at waist height (4 feet or so from the opener) it learned and confirmed immediately! This worked for both the original remote and the KLIK3U on the first attempt vs never working when holding it right up against the opener.
I suspect it has something to do with antenna hanging down and receiving a remote signal so close and causing some sort of interference on its own signal across the length of the antenna.
thank you for posting this video I appreciate you keeping it simple start to finish. Clear cut and done.
Perfect and simple. Thank you
Thank you Sir! Extremely helpful!
SO helpful, you saved the day!
Thank you! Relatively simple thing to do, however the instructions that came with the remote were no help at all. Thank you again!
Perfect, works with KLIK5U-BK2 as well!
Great video thank you so much!
Programmed my garage door due to your video!
Many thanks for your help!
Just thank you!!
Thanks SO much! No where on the instructions did it say first press the learn button on the remote & to press the open/close twice at the end.
Thank you sooo much.!! Help tremendously.!
Thanks!! This worked perfectly
thank you. good and clear instruction.
Thank you!!!
Omgosh thank u so much!
Perfect...thank you 🙏🏻
Followed your steps and failed. Last attempt, success! Don't know the pattern I worked through; but, your video helped. 8o)
Got it in the very first click.
Thank you so much!
You are awesome. Thank you so much
The two recently purchased universal remotes for the Overhead Legacy 696cd/d, after watching your video, actually opened and closed the garage door!
They work [opening and closing] after being programmed only while on the ladder near the motor head [learn code] is located. Once back on the garage floor, it does not communicate, so nothing happens until your back on the ladder and reprogramming. Obviously, I have missed a step to SAVE the communicated info between the remote and motor.?.?.? UGH. Can you or anyone be of help please. I was so excited the door actually opened and closed after an exhausting couple days trying to program with absolute no luck [I concur with the other comments as I, too, tried many avenues with absolute no luck] so finding your video was GREAT!
Now I just need to "save???" the information programmed from the motor to the remote so I can get off this ladder and put it away. :-)
Thanks in advance for your help!
Thanks so much❤
Thank you sooooo much, it worked!!!!
Thank you, thank you, thank you!
You rock. Appreciate you
HOLY CRAP THANK YOU!
THANK YOU!!!
Perfect 🥰
I think one controller was six clicks and the other was 7 so there on different frequencies may be..
Amyway i like the sleek lil remote i have four cars so ill have to pick up an extra set ...thanks for video
Oh my god it worked!!!! Thank you!!!!!
Thank you very much for your help.
It opened garage door is fine but
Close door is not working.
What did I wrong? Please tell me.
Thank you. Not sure why they make these things so hard to program out of the box?
My garage will not open at all. I have no other way to get in. is there a way to program the remote without access to the garage.
Now I shall charge my bf for my services 🥱 he told me to call the service company 😬
Thank you!!!