How To Replace Fog Light Wiring Kit 2010-2017 Chevrolet Equinox
Vložit
- čas přidán 24. 02. 2022
- Buy Now!
New Fog Light Kit from 1AAuto.com 1aau.to/ia/1ALFZ00148
This video shows you how to replace the Fog Light Wiring Kit in your 2010-2017 Chevrolet Equinox.
This process should be similar on the following vehicles:
2010 Chevrolet Equinox
2011 Chevrolet Equinox
2012 Chevrolet Equinox
2013 Chevrolet Equinox
2014 Chevrolet Equinox
2015 Chevrolet Equinox
2016 Chevrolet Equinox
2017 Chevrolet Equinox
Tools you will need:
• Pocket Screwdriver
• 7mm Socket 1aau.to/oLN/1AXAA00017
• Trim Tool Set 1aau.to/oro/1AXXX00006
• T20 Socket
• Silicone Paste
• Wire Ties
Subscribe: / @trq
Check out our playlist:
Chevy Equinox 2010-2017 2nd Gen: • Chevy Equinox 2010-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Oh my goodness. I wish this video had been made earlier than it was. It would have saved me a lot of grief. This video was everything that so many instructional videos of this type lack. Detailed steps from start to finish, good lighting, good camera work and someone that actually knows what they were doing. Absolutely excellent in every way. I had installed my fog lights almost 2 years ago, but didn't complete the wiring as I just wanted the lights installed first and foremost. What held me up for so long, when I decided to finish the wiring, was trying to find a video showing how I could get through the firewall. I knew there was a way to run it, but would have had to take the fuse block off to find it. I didn't want to attempt that as I couldn't ever find a good video like this one showing how to do it. So from time to time, I'd try to find another way to run the single wire through the firewall. I'd get started, get frustrated and stop. That's where I could have really used this video long ago.
Just today, I finally was able to run the single wire through the firewall by way of where the hood release cable goes through. With that finally out of the way, I wanted to hook the power cable up to the ignition, so I wouldn't have to worry about forgetting to turn the fog lights off. I did a search here on CZcams, and this is the first video I watched. So glad I did, as it showed me the exact fuse to hook it up, and more to finish my installation. It also showed me where I could ground the wire in the cab, and even where I could mount the switch. Also showed where I could hook up the power and ground wires under the hood. Thank you so much for making such an excellent video! I can finally use my fog lights.
Excellent and detailed explanation of how to install these. I would have been totally lost without your help. Thank you!!!!
Thanks for the video, that wiring looks like such a mission, I might just wire them straight to the headlights to save some time
Great job
Awesome video! quick question how long did this process take from start to finish?
I'm confused by the white wire removal/ repinning... was it from the button side or the harness side? How did you get the rest of the connector inside there??
where I can find the jomper going in the cabin with fuses
how many you broke of them lower bolts?
good detail...
If it’s possible could you show this on a 18 and above equinox?
+@bradgilpin9740 We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ
How to get it fog light?
Do you guys only sell the wired kit
Where are you located