The most universal FPV camera. SIYI A8 mini. detailed review.

Sdílet
Vložit
  • čas přidán 9. 07. 2024
  • This video takes a detailed look at the A8 mini camera from SIYI. The camera has a three-axis stabilizer and a 4K sensor, which made it possible to equip it with a 6x digital zoom. I tested the camera on a drone with an analog video transmitter and an airplane along with the SIYI MK15 system, and you will learn about its pros and cons in this video.
    Timecodes:
    0:00 - introduction
    2:54 - appearance and connectivity
    8:16 - flashing with SIYI Assistant
    11:54 - turn on and check works
    16:55 - setup with SIYI Assistant
    24:53 - HDMI output delay test
    27:41 - setting up and connecting to an analog transmitter
    30:31 - flight test on an analog transmitter
    36:00 - flight test with SIYI MK15
    41:00 - conclusions
    Link to the official seller on AliExpress:
    sl.aliexpress.ru/p?key=UmlVZ6g
    The user manual and firmware are on the manufacturer's google drive:
    drive.google.com/drive/folder...
    Russian-speaking group for SIYI products in Telegram: t.me/siyifpv
  • Jak na to + styl

Komentáře • 42

  • @user-wc6ex7ev5v
    @user-wc6ex7ev5v Před 7 měsíci +3

    Спасибо за достойное видео! Благодаря Тебе я теперь могу более эффективно утилизировать натовский металлолом под Запорожьем!!!🎉

  • @user-nq3ov3cg2s
    @user-nq3ov3cg2s Před rokem

    Спасибо тебе добрый человек!

  • @user-bx5rp3eg5f
    @user-bx5rp3eg5f Před rokem

    Спасибо обзор. Камера супер очень подойдет для тех кто планирует перейти с аналага на цифру комплектом зум и подвес со стобилизациеей. А может и то и другое использовать.

  • @JulioDurand
    @JulioDurand Před 2 měsíci

    Thank you very much for the information!

  • @sb_boiler
    @sb_boiler Před 10 měsíci

    После вашего к статити ролика про аналог и цифру, купил цифровые очки

  • @simenscott
    @simenscott Před 9 měsíci

    How do you get OSD with home direction?

  • @PhuongHoang-xt6sx
    @PhuongHoang-xt6sx Před rokem

    I tried to control the camera with fs i6 through fs ia6b so I connected camera's tx pin with fs ia6b rx pin but nothing happened. Could you please help me out? Thank you very much!

  • @jojomajo
    @jojomajo Před 2 měsíci

    Сейчас получается можно даже к dji висте подключить её, с новым переходником на HDMI, норм тема

  • @redscorpion201019
    @redscorpion201019 Před rokem

    интересный обзор, спасибо большое. но все-таки, на самолете корректнее подвес будет работать когда камера снизу. на коптере завалы такие не были заметны. а что за полетник стоит на самолете? интересный интерфейс.

    • @TrueMaMu
      @TrueMaMu  Před rokem

      Полетник на самолёте Matek H743 W-lite. Но интерфейс на OSD формирует приложение SIYI FPV

  • @dangbk99
    @dangbk99 Před rokem

    I want to ask if it can connect to Rush Tank VTX? If yes, how to connect the wires, thank you!

    • @TrueMaMu
      @TrueMaMu  Před rokem

      Yes, you need CVBS wire from A8 camera

  • @ahsanrafiq6119
    @ahsanrafiq6119 Před 2 měsíci

    can you provide the wiring diagram for analog system please.

    • @TrueMaMu
      @TrueMaMu  Před 2 měsíci

      The pinout of connectors and CVBS pin are shown in the instructions for the A8 camera

  • @gorgcoming6590
    @gorgcoming6590 Před měsícem

    Добрый день. Как ее приконнектить к спидиби F405? И меется ввиду - управление поворотным механизмом.

    • @TrueMaMu
      @TrueMaMu  Před měsícem

      Нужно подключить sbus (можно пустить параллельно). В камере через SIYI Assistant назначить функции поворота на нужные каналы

    • @gorgcoming6590
      @gorgcoming6590 Před měsícem

      Подключить Sbus - можно пожалуйста подробнее? )
      Спасибо.

    • @TrueMaMu
      @TrueMaMu  Před měsícem

      @@gorgcoming6590 в камере есть вход sbus , такой же как на полетном контроллере. Выход sbus из приемника можно параллельно подключить и к полетному контроллеру и к камере. И настроить так что 1-8 каналы идут в полетник, а камера например будет использовать 9, 10 и далее.

    • @gorgcoming6590
      @gorgcoming6590 Před měsícem

      А какой посоветуете приемник?

  • @PKSiam-st5rc
    @PKSiam-st5rc Před 5 měsíci

    Hey there. This is the best video on how the Gimbal and MK15 on the internet. I connected exactly like yours but my camera A8 Mini is not getting detected. I checked the wiring and RX goes to RX and TX goes to TX to and from the radio to gimbal. Do I need to swap them around?

    • @TrueMaMu
      @TrueMaMu  Před 5 měsíci

      Are you talking about connecting an Ethernet cable? Usually it is enough to use the supplied cable to connect the MK15 to the A8 for everything to work.

    • @PKSiam-st5rc
      @PKSiam-st5rc Před 5 měsíci

      @@TrueMaMu wow thanks for the quick reply. I think I may be having a binding problem. The red/orange light on remote blinks and on the air unit the middle blue blinks fast, left red/orange and right green don't blink. I updated to the latest firmware available on the website product page. I will have to figure this out before dealing with video because in all your videos I see that the radio/remote is emiting green light. I am doing all this without connecting to any flight controller as well. Thank you for the very quick response. Just subbed your channel 🔥🔥🔥🔥🔥.

    • @TrueMaMu
      @TrueMaMu  Před 5 měsíci

      @@PKSiam-st5rc Yes, the green indicator should be "on", on the air unit after communication is established. Typically, communication between the unit and the ground station appears after 15-20 seconds after power is applied. If you have an MK15 remote control, check that the RF firmware version on the remote control is 5.4.2 and on the air unit 5.2.8. These are the latest firmwares. You can bind a unit to a ground station using the SIYI TX app. Latest version 1.1.248. The binding process is normal, as with most receivers and transmitters: you need to turn on the bind mode on the remote control and press the bind button with the air unit turned on. After that everything should be bound. You can check that you have communication between the unit and the ground station in the SIYI FPV APP. In the status line at the top right you should see the signal level in dbm as well as the data transfer rate in kb/s. Even without a camera connected, you should be able to see it. I hope everything works out for you, good luck!

    • @PKSiam-st5rc
      @PKSiam-st5rc Před 5 měsíci

      @@TrueMaMu Thanks so much. RC firmware is 5.4.2, AU is 5.2.8 like you said. RC FPV is 6.2.2. AU FPV is 0.2.2. Bound it several times but still getting a blinking red orange on TX and stable red, fast blink blue, and stable green on AU. In LInk Status frequency is 82, Loss Rate 0%, Valid package 82, Valid Package Rate is 102%. Data Upload and Download is 0. I think there is something wrong with my unit.
      I tested the sbus output and it works. I think I am almost figuring this out. Thank you so much.

    • @TrueMaMu
      @TrueMaMu  Před 5 měsíci

      @@PKSiam-st5rc If the TX is blinks yellow and red, it is overheating. Try turning it off and waiting for a while until it cools down

  • @carlossantana7179
    @carlossantana7179 Před rokem

    Заметил у вас А2 mini, обзор не планируете?

    • @carlossantana7179
      @carlossantana7179 Před rokem

      Просто у меня она есть но ещё не пробовал

    • @TrueMaMu
      @TrueMaMu  Před rokem

      Я думаю сделаю небольшой обзор, но без летных тестов. Там я думаю и так будет все понятно

  • @FlyCamKZ
    @FlyCamKZ Před rokem

    Да, время задерки не FPVишное, а так, просто прогулочное повыше.

  • @PlagueDokt0r
    @PlagueDokt0r Před rokem

    А можно ссылку на камеру ?

    • @TrueMaMu
      @TrueMaMu  Před rokem

      Вот, в официальном магазине. Возможно у других продавцов вы найдете дешевле.
      sl.aliexpress.ru/p?key=UmlVZ6g

    • @Slavkin45
      @Slavkin45 Před rokem

      Цена огонь.

  • @sb_boiler
    @sb_boiler Před 10 měsíci

    А какой полетник?

    • @TrueMaMu
      @TrueMaMu  Před 10 měsíci

      Я использую matek wing

    • @sb_boiler
      @sb_boiler Před 10 měsíci

      К любому полете ку можно подключить? Osd тоже будет работать? У меня speedy bee 405 ый. Walksnail очки и камера с передатчиком. Но оказалось этого мало для рассматривания земли с высоты 100 м. Эту камеру к передатчику walksnail можно подключить?

  • @TheZerocul
    @TheZerocul Před rokem +2

    Ну нах. за 21к, это качество как с квадриков стоимостью 15тыс.и вообще пора бы уже забыть про аналог, после выхода О3 и гоу про смысла нет на квалриках возить.

    • @TrueMaMu
      @TrueMaMu  Před rokem +1

      В О3 нет цифрового зума, нельзя поворачивать камеру, нет механической стабилизации.
      По качеству съёмки и задержки О3 лучше конечно, но не такая универсальная как А8

    • @STRIZH_FPV
      @STRIZH_FPV Před rokem

      Не заметить разницу в футажах между о3 и гопро может только слепой. Да, новый юнит хорош, но матрица размером с ноготь, как ни крути.

  • @user-th5cg7ty8t
    @user-th5cg7ty8t Před rokem +1

    задержка пипец

  • @napaTpynep
    @napaTpynep Před rokem

    Да-да... Fpv-шная...

    • @TrueMaMu
      @TrueMaMu  Před rokem

      FPV это не только гоночные дроны и крылья. Полет по FPV подразумевает использование камеры и приемо-передающей видеосистемы, поэтому камера эта для FPV, а сферы применения этому только растут с каждым годом.

  • @user-ue2rj6lv5o
    @user-ue2rj6lv5o Před 2 měsíci

    Этого не может быть.