Breaking Down The Ebay Turbo 500HP Single Cam D16 CRX
Vložit
- čas přidán 29. 06. 2018
- We tear down the ebay turbo CRX to refresh it for it's next big step up in power. The ebay turbo broke apart so we've replaced it with a Precision 6262 and a new manifold. Stay tuned fo this epic build!
Want a T-Shirt? humbleperformance.com/tshirt.html
Support us on Patreon: / stayhumble
Instagram: humbleperformance
facebook: HUMBLE PERFORMANCE
website: humbleperformance.com - Auta a dopravní prostředky
I made 433whp 307wtq at 21psi on a d16z6. I built it in my kitchen.. Stock cam.
Dank Solution what turbo?
文刀 precision 5431
How's the head gasket holding up, just curious since they are prone to burn out?
You're definitely single lol
@@MultiChimRichalds *wife walks in to see greasy ass bearings on her counter*
I have made 220 WHP (~9psi) on my 100% bone stock D16Z6 for the last 12 years, absolutely nothing broken.
d16z6 vtec + boost ? How did that go ? I have a z6 myself and would like to know.
@@vtec3070 most people don't tune with 2 separate cam profiles, basically VTEC is always "on". Makes it easier
Do you have head studs?
@@RiggsGarage he might not but it's a great idea.
230whp is attainable on a stock z6 single cam with a bigger turbo.
I used to run my stock ZC dual cam D series on 15 psi lol. Only mods were 450cc injectors, 6 puck clutch, turboedit, and proper crankcase ventilation routing. Made my own manifold out of HF manifold and adapter plate. Hardest part was downpipe and getting a bung put on the oil pan lol. I actually just went to the industrial area in my city and asked people to help me make the stuff for $20 bucks lol.
@@SpenserRoger awesome! Good news to hear people doing this stuff right, on a budget, with some common sense. I have a B7 currently, considering rods and pistons for it since they make them now.
10 years ago me and my brother built a vitara piston and eagle rod d16 had it tuned at speed factory. Back then us and the shop was not sure about the cast pistons. James tuned it to 15psi and it held great. Now its crazy to see how hard people push them.
That's a perfect combo for the street. My dream build right there. Maybe a little less power like 400 or 450. Awesome cars guys.
Aaaaaaawww, look at that cute little head. Hopefully it wants to be a K20A Turbo when it grows up. That's what I'd want to be when I grew up if I was a D16 single cam.
Saying it now, I see big things for this channel, always comin with that 🔥🔥 content!!
Single cam for life Orlando Florida in the house respect ✊ ✊✊✊✊✊✊💥💥💥💥⚡️⚡️⚡️
Love this channel. Would love to see more B series and D series stuff. Love the little single jungle though. Sincerely a Mustang guy.🔰🔰🔰🔰🔰🔰🔰🔰
Heck yeah p2p0 rods and ycp vitara pistons ftw. Classic, cheap, durable💯👍.
Nice vids. I get all real stuff on eBay. They get a bad rep over China junk. Shout-out to real street for the hookup. eBay is just a site. It's all who u buy from. Keep it up!👍👍😁
Heck yeah 🇵🇷 simple trick. Vitara pistons and a cheap aluminum blockguard in a d16/d15 💪. What I'm building now a year later and having Alex tune for me when I get to OK next yr.
Pretty awesome the sohc builds are still around!
Love the D16.
Throw in some suzuki vitara pistons and rods, got you a strong bottom end for cheap.
So underestimated. Great motor.
Just sell them as crate motors....like a kit with a ecu and supporting parts or list of parts
We do.
Humble Performance a cuánto? Tengo una CRX y me encantaría montarle un palo sencillo del diablo.
Humble Performance still sell them as crate motor ?
@@humbleperformance how do I find?
I'm interested in buying a full swap, what's your contact information?
Can't wait to see what it can do!
Cant wait to see what it can handle!
BEST CAR AND VIDEO ON CZcams!!!!
Dream, set up an ride.
One day I'll have a 90 CRX SI
Maybe you can make T-shirts with the slogan,
"Dream,
Set up
&
RIDE"
Then you can use a % of the revenue from the t-shirt sales to ship me a CRX lmafo!!!
Make a CZcams video of the exchange/gift and get more subscribers
Hell YEAH! Single cams rock!!!
What's the full specs of the motor like bearing clearance on the crank with the rods / p2w gap /upper and lower oil ring gap I'm building a z6 with the vitara no notch rods n pistons and there tricky not many forms on the sets ups
I'm curious about what transmission this build is running and how it holds up to this much power. I'm guessing it runs on stock axles? Which clutch is holding that much power?
Should I swap my z6 from my daily into my wagon or buy a d15b non VTEC? The d15b I can get for 600 and if I swap the z6 I can get a custom harness plug and play for 390. Also the z6 was just rebuilt less than 10k on it.
Guys what solutions do you have for preventing head lifting on the D series I have a build d16y8 arias forged pistons Manley rods no block guard.. Arp head studs torqued to 60ft/lb car made 340hp/277trq @18psi @20psi I suspect the head started to lift as it started pushing coolant timing was also very conservative... Any solutions? How much trq do u guys apply to the arp bolts? Should I retorque the head or change the gasket.. Car never over heated either.. Any an all help appreciated
I have a turbo d16z6 in my CRX, with upgraded internals, and the only thing left stock, are the ‘rocker arms’. (Not sure if that’s the correct term?) But the contact pads were worn, and I replaced them with oem parts.Did you guys use upgraded rocker arms? If so, I’d like to know who sells those after market rocker arms.
Any issues with gasket failures. Is it o ringed? Just arp headstuds?
Well I know what rods to buy for my z6 now lol. Did y'all notch the girdle or cylinder walls
Man that engine was trying to jump out in the first shot
Aquí un crx d15 en Morelia Michoacán México...olvidado ..ansioso por ser modificado
Pienso en hacer un swap engine de mi Sohc civic 2000 a instalar un f20b ! Mi pregunta es ; puede hacerme ese swap y q lleve aire acondicionado? Gracias Boricua pero recidente en norte carolina
I like single cam engine..is so powerfull...your crx very nice car.i liked.
You said skunk2 valve springs and retainers so is that with stock valves?
What manifold was it using ? Link would be appreciated
hello, i have a quick question and was ondering if you could help me. In summer im gonna go turbo on my D16V1, vitara pistons, speed factory no notch rods. but i need some arp headstuds. Now, i see that there are studs for z6, y8. Which studs would i need for the d16v1?
I got the exact lower end setup on my d16z6
nice builds
What stage? Skunk2 stage 2 or stage 4? What did u need to install it?
What bore and what head gasket????? Please tell me I'm building a dz6 Vitara right now.......so could you please let me know....
How much psi were you guy's pushing on this build on the turbo being used?
What skunk2 cam are you running? Amazon sent me a tuner2 cam by mistake… is that ok to run with a turbo? A lot of guys are telling me the valve overlap will mess with the turbo building boost.
What brand head gasket did you guys use in this build?
what brand are the new bearings you put in?
Vitara pistons? I’m running vitara pistons and eagle rods in my d16
How many miles did the bearings last for?
I call dibs on the crx mudflaps if he ever parts it out :p
Sick !
What oil pump for this setup was used ?
Is there a list f parts you guys used.
That is a clean ass crx. How much of that was you vs done? (Exterior)? Why stop at 500?
Wish we were close by I’d have my car done by you guys #humbleperformanceftw
Rage Lucas #AllIWantForChristmasIsA#HumblePerformanceTune #InMyDreams #OneDay
Holy fuck and this is RECENT? Bruh. Subbed. New favorite channel.
bobby luke yes. The crank is currently at the machine shop. Thanks ❤️
How much did you spend overall to get 500HP
I have a f22a1 non VTEC I want to build up to at least 350 to 400hrp without using boost what should I get let me know and I'll make a video of me putting everything you say on it
What transmission was this crx running
What do u have done to it
Donde están ustedes ubicados ? Yo estoy en Raleigh Nc y recién compre Nc civic ex d16y8 motor virgen !! Y quisiera q tener mas hp ! Y quisiera llegarles no importa donde my frend
I have a stock 97 hx Civic with a d16y5 115hp I want to turbo it and try to get as close to 200hp without spending to much. Any help is greatly appreciated.
Huyyy... PR en la casa.
What fuel are you using?
What does it rev tooooooo?
Que trasmision tiene eso
What block and head is he using y8 or z6
Brand block guard?
Nice.
Subbed 👌 nice work
Is it on standard size arps still have a similar build going right now?! Love the channel and this crx!
D'z Garage for this power I would recommend drilling and taping to accommodate larger Studs. Keeping a gasket sealed in anything over 25 psi is problematic. You can use different gaskets, but real additional clamping power is what you need.
What block guard is that?
What turbo kit was it?
What compression pistons are you using? My b16 turbo blew the sleeve on the dyno at 400 hp with cp 9:1 pistons, I did not have a block guard
We run 10:1 in everything boosted. Vitara pistons are lower compression though, this motor was built by someone else.
What fuel was used?
What piston size and brand?
Can you roll in fresh bearings while it's in the car on a d16? How often do you freshen it at this power level?
Dingus E. Dow a d crank does not weigh over 100 lb
Dingus E. Dow yeah so small
If I want between 300-400hp should I use a block guard and stock sleeves on a y8?
FroztiProductions - To be Safe yes.
what transmission is he running ??
sweet car crx😎
Which skunk2 cam?
What sleeves is he using
What you guys recommend. Block guard or not? I'm thinking going for 400+hp. I'm going to install Flanged Darton Dry sleeve and I'm thinking about CSS BLOCK too. Thanks you guys are the best
CSS is the best bang for buck.
@@humbleperformance any recommendation with Darton dry sleeve. Thanks
thanks for motivation im starting to build d16 turbo but i was thinkin about b series too but i think i cant afford it looking at the prices of good shape b series and boostin it i prefer to make the same power of a sohc and if it brakes u can always buy another one. In my country there is not too much b series but d is rly cheap and eaasy to get
TheBordercivic979 📸🔥🤙🏾 single cam life 🔥🔥
Hagan las versiones d esos videos en español !!
Can you list the full list of what we need please next video
We're can I get a single cam head for a 7AFE please?
I the single cam 🤙🏻
Looking to make 550-750 in my F23a1!
sickkk lil sohc v mann send it
channels sick
Hey were is your shop?
What kinda headstuds would you guys recommend for 600+hp on a d16?
Arp Arp all around best
Is this a d16a6?
Man that's what's up cam, pistons, rods and gaurd with a turbo...500hp. Hijole!!!
you should the main bearings so you don't lose oil pressure on those
i can't wait for the next one plz plz plz unew vid ! update !!!
What block is this? z6, a6, or y8??? I'm assuming that you're running a shimmed y8 oil pump? This is awesome btw. Looking to build a D16 with close to 400hp. Thanks!
Z6
why did that bearing getworn out so badly?
Hey.. the um wing on that eg.. I don't think it's big enough
500 hp in a crx must be insane on the street.
Engine is d16z6 or??
Chippy Choppy Fabrication 😆
What about a 1.5L vtec jdm motor?
What's the setup