Removing a Neff Slide and Hide Oven Door
Vložit
- čas přidán 30. 05. 2024
- Neff Slide and Hide Oven Door can be a little difficult to remove, once you you know how, you realise they are easy to remove. Remove a slide and hide door like an oven cleaning professional with these useful oven cleaning tips.
There are a few other models of slide and hide doors but the principles are the same.
** GET YOUR FREE OVEN CLEANING EBOOK: ovencleaningtrainingacademy.co.uk **
We help people to be their own boss by sharing all we have learnt in order to take control of their financial future so that they can earn from £1000 per week becoming an expert in their field and having more free time, without our help they will always be thinking about how to start, with our help they will be able to launch a successful oven cleaning business within six months.
Our oven cleaning crew grow in cofidence and enjoy meeting people within their communities. Learning new skills and are challenged daily.
** CLEANING PRODUCTS **
We use Vegan, Crulety free and Made in UK products from www.homeloving.co.uk
** FOLLOW US ON INSTAGRAM! **
/ ovencleaningtrainingac...
** LIKE US ON FACEBOOK! **
/ ovencleaningtrainingac...
** START YOUR JOURNEY TO A CLEANER LIFE! **
CZcams: / @ovencleaningtraininga...
Blog: ovencleaningtrainingacademy.c...
Questions? Comments?
We'd love to hear from you - say hello down below!
THIS EXPLANATION IS BY FAR A MUCH MORE INFORMATIVE DESCRIPTION THAN THE OFFICIAL NEFF VIDEO. IT SHOWS YOU THE WAY THE MECHANISM WORKS ANS SHOWS YOU EXACTLY HOW THINGS SHOULD BE ALIGNED IN ORDER TO REPLACE THE DOOR. FULL MARKS ! THANKYOU.
Thank you for the amazing feedback
Agree, I got really stuck because I couldn't get it back on properly, then I watched this about lifting the handle to get it back on and all was sorted.
@@Nicereview763 great to hear
Thank you
Thank you so much for this clear and concise instructions.
Thankyou. After fapping about for an hour with a Neff produced 'how to' video trying to get the door back on I searched and found yours. Five minutes later all sorted.
Awesome
Thank you so much for this ;)
The instructions were useless, but doing it your way was a doddle!
Instructions say to do the two stages the other way around, and says to have the door at 45 degrees!!
Excellent. Explained in four easy steps what takes a full page of complicated diagrams in the manual provided. Cheers!!
Saved my life. 😊
thank you, great explanation
Thank you. much appriciated!
Brilliant Thank you!
Great! Much better instruction than from NEFF
Awesome
Thank you,this has just saved a bill….and an argument!!!
The world is better for one less argument
Greatly needed video. I so need to see how to remove , cleanand replace the glass of the oven door. Also How to clean the oven and if we can leave the racks and the grease pans inside while cleaning. It is easier to understand watching it being done.
Please and thank you in advance to consider my request.
All the best to you!🥰
This is just a video showing how to remove the door. We have an online course show how to clean the oven.
I completely regret buying NEFF products for our new kitchen. Having to REMOVE the glass in order to clean it should tell you everything you need to know. I never had any cleaning problems with our Siemens ovens which we fitted in our previous home refurbishments.
Thank you for your tutorial, which is was better than the NEFF official one or their extremely poor online manual!
Over engineered
Brilliant video my friend. Really helped me out today. Massive thank you, to you and your daughter.
Thanks. Watched a few other videos but this is the only one that helped. Mine had detached itself. All good now
Thanks for that, a straight forward and easy-to-understand explanation .
Thank you
Very helpful, our door came off and the rod was left at the rear of the oven. Clear and simple 👌
Amazing!
Thank you so much I followed another video to remove it to replace a broken side rail. Having to wait a few days before the replacement arrived I then couldn’t work out how to fit the door back on. Really great tutorial video you have here and a massive help! much appreciated 👍🏼👍🏼👍🏼
Pleased it helped younout
So helpful thank you! Easy to follow and successfully removed and replaced the door.
Awesome
Thanks, that worked! I followed your method which was slightly different to the instruction manual
That’s great
Thank you, your video has been very helpful!
The best video. Thank you very much for your help
Very good tutorial- made it very simple to follow, and it really was simple to do with the guidance given
Awesome
Brilliant very well explained
Did it first time. Great video! 👍
Thanks very helpful
Best Video! Thanks a lot!
A great easy to follow tutorial thank you.
Thank you
Thank you so much for your help 👍👍👍😃😃😃
Perfect !!!thank you very much !!!it was so easy !!!
Perfect.. just what I needed.. thx..
Thanks for the video
It helps me to loose the door and fix my handle❤
Thanks Ian
It worked
Help! I wish I had seen your instructions before Neff.
The bar has not stayed in place despite locking in place prior to removing the door. How do I solve this problem please?
Hi Thank you so muсh!
I did mistake when uninstall the door, and when i try to install it back, faced with problem. With your video i find and fix it quickly. 👍👍
That’s awesome!
Better than the Neff vid. Would say though to lock, the one on the left goes clockwise and on the right counter clockwise. When refitting obviously reverse. The Neff one says unlock the runner bar first which results in it moving from where it should be when you lift the door off. Absolute nightmare😤 to get it back in place aligning with the other two runner guides on each side. Shall get it right next time!!👍
This is actually one of the most stressful things I have ever done. Have to do it again now because I, spilled grease.
Perfect thanks just what I needed
Awesome
The bit that you said puts you in a pickle i.e. the right side grey screw and associated black circles spring thing are now not aligned and the locking bar is now loose. I tried pushing the two black bits forward but grey screw doesnt lock it. Can I just try to reattach the locking bar with the right two black bits not locked? Help
Need your help, obviously my door was not locked properly and it pinged out.. do U have a video of what to do if this happens...please..😢
Ok, I'm going to try this today. I'll let you know if I'm still struggling 😁
все понятно, спасибо большое
Any advice for if the springs on the side have clipped out? One of mine has (the right spring) and I’m now unable to flick it back up to insert the sliding bar again. If that makes any sense!? Haha. Any help would be appreciated.
hi i managed to sus it out thanks
Mine are both marked between glass panel. How do u separate them to clean? My owns are spotless but look dirty because of the glass. Have a professional out but he refused to remove door in case it broke 😥
Hey anyone wondering what the hell to do if you took the door of and can’t put it back. One reason could be what happened to be, the actual roller hinges snapped back into place. So I could slide the door in. To fix it, took me a whole to work but you can shove the roller things back and down, mimicking a door, you will hear a slight click and then you can let go and they should stay in place at a nice angel for you to slide the door back on.
How long would you allow to remove the door, clean it, then refit it? Thanks.
great post thank you. any ideas if I have over stretched pulled the metal bits that go into the door. I think it happened before and it over extended and has now locked. I can't get it back. An engineer came and sorted it quickly and I'm just trying to remember what he did. Thanks
Do you mean the cables inside the door? They can be fragile.
Help i took the door off and managed to get it back on again but its got stuck in the hide position 😱. So the door wont pull out so i can close it! And obviously cant get to the roller bar etc 😱😢
Thanks for the video. Is it possible to clean the inside glass? How do i do it?
Yes it is, you have to remove the door
hi just wondered if you can help my hide and slide door broke the plastic side on the hinge part I've now got a new side but there are two small springs i don't know where they hook on to thanks in advance for any help
Just a question where did your plastic side on the hinge
@@linolly1 hi are you asking where i got the hinge igot i got mine from espares
I need some help as the bar that supposed to be in place with the help of the lateral hooks has been realised… and I can’t put the oven door back in place… any advice?
You need to unlock, move the bar to the correct place and re-lock in position
Hi Ian! I need help!
I just took off the oven door to clean it. But now one hinge is pushed down (left) like in the video, the right one is up. Pushing it down then turning the little plastic screws in the « towards oven » position again doesn’t lock the hinge in place. Looks like the right plastic screw has no effect on the right hinge 😰 Help!
Hi did you manage to find a fix for your issue? I am having this same problem
Hello, i have an issue i clean my door and i reinstall it but 3day after the door is block opened, one side isnt moving after the door start angling, do you know if i cant do somethig about that
Sounds like the door could be still in the locked position
My door won’t come off. Took an age to find the first step, did the second but it just won’t come off!
hello, I remove the door, but (maybe I did a mistake) my two buttons (which you touched in 2.46) in both sides are up (instead of down as yours)! So, it is impossible to re-install my door. How can I replace them in their right position?
Hello Christos, up or down you just need to make sure the hinge the locks to door back on the oven is open so you can get the door back on and locked in position. Hope that helps
We've got an odd problem with our Neff oven where the door handle no longer remains horizontal as the door is opened. I guess that the door frame contains some kind of gearing between the handle and the hinge that's broken. Any idea what could cause this?
Jon, inside the door on each side is a cable which controls the sliding motion and the movement of the door handle. The cable wear over time. It’s sounds like yours may have broken.
@@ovencleaningtrainingacademy I think you're right, the frayed broken end of a thin cable is just visible in a gap by the handle. I'm nervous about trying to remove the door in case I can't get it to fit back on because the broken cable means the "lift the handle slightly" part of your instructions probably won't have any effect.
@@ovencleaningtrainingacademy
I think you're right, the frayed broken end of a thin cable is just visible in a gap by the handle. I'm nervous about trying to remove the door to investigate in case I can't get it to fit back on because the broken cable means the "lift the handle slightly" part of your instructions probably won't have any effect.
Your right. Lift the handle slightly won’t work. You may need brute force to remove the door which could create other issues with damage.
So what happens if you end up having that bar fall out and now I’m in a pickle! How to get that bar back in??
Did you manage to get a fix for this 😅
Yes I got it back on after a bit of stressing about what professional I would need to call and several attempts of what seemed impossible. I ended up getting it back on. Thought I was going to break something for sure!
It's far easier to flip the small cog upwards on both sides of the door whilst in the closed position, then pull the door forward and turn the slotted screw on left and right bottom cam.
What ever works for you
Can someone help me?
The inside glass fell off my door, I need to find the top hooks ( one got lost ) and a suitable adhesive.
Where can I find replacement hooks and adhesive?🤞
You would probably need to go direct to neff for those specific parts
This site may help www.neff-home.com/uk/service/care-protection-and-parts/spare-parts-local
@@ovencleaningtrainingacademy Thanks bro, I’ll give that a try. 👍👍
Am struggling to get the bar to go in the slots any help asap please
Try lifting the handle a little. Should drop back in.
@@ovencleaningtrainingacademy the runner bar that goes under had came off I don't know how to out it back in
The bar gies across the oven base and sits in the runners with 2 wheels on each side of the oven. You need to make sure the bar is back in the runners and then locking the runners in place before placing the door back on.
The only way for the bar to come off is if the door isn’t locked in place correctly.
Anyone know how to remove the seal.
Pull from each cover. the bottom of the seal twists out
@@ovencleaningtrainingacademy doesn’t seem to want to come out Maybe you could do a video demonstration.
Seal doesn’t have hooks. Seal seams to be a canvas material,hooks look more like paper clips.
@@Macm73 Dosent sound like to you have a Neff Slide and Hide
@@ovencleaningtrainingacademygot 2! 2023 models.
I tried for an hour multiple different tutorials . Still didn't work . However I have taken them off a year ago and it worked. Maybe something went wrong last time and now it won't come off. Bloody annoying
No reason why it won't come off. I can only think the lock mechanism holding the door on isn't pushed up enough (if that makes sense)
@@ovencleaningtrainingacademy thanks i ended up getting it, the trick was not to lift the handle up when taking it out
Good explanation but …. The rest of the world uses LANDSCAPE format, why don’t you ????
Tried about 10 times...Given up....Will have find an oven cleaner who can do it for me...🙄
They are tricky
That second action, "unlocking" between the oven door and frame is impossible to find on my model. Truly a terrible design, oven has been stained between the glass panels from the first usage. The worst appliance we have ever bought.
What’s wrong with your camera?
Not a lot
📷 work is Terrible couldn't see a thing
what model is this?
Neff