GIANT RC Car gets MASSIVE Race Engine (6x power)
Vložit
- čas přidán 3. 04. 2023
- Get car here - www.avantlink.com/click.php?t...
Taylor RC 50cc engine www.taylorrc.co.uk/product-pa...
Taylor RC Upgrades - www.taylorrc.co.uk/losi-5t-2-...
AGF Servo - amzn.to/3K98xgj
🎓Kevin's eBay Secrets - 11 steps to work from home kevtalbot.clickfunnels.com/sq...
🚗Talbot stickers - what-happened-merch.creator-s...
👕Clothing teespring.com/stores/kevs-merch
🚗Win one of my cars raffall.com/kevin_talbot
💚Kevin Talbot Rumble rumble.com/user/KevinTalbot
🧡Kevin Talbot instagram / talbotkev
❤️Kevin Talbot TikTok / kevtalbot
💙Kevin Talbot Facebook page / kevintalbotvideos
💡Check out my Business CZcams Channel: / @kevtalbot5356
🎥My LIVE Stream CZcams Channel - / @kevintalbotrc
🚗Kev's RC Basher School - kevin-talbot.teachable.com/p/...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Most videos are RC Cars, business, Amazon FBA, eBay, Monster truck, Cars, insurance, cryptocurrency and other topics.
subscribe!!
#Kevintalbot #rccars #rc
first
Boom!
I was actually first but I erased my comment so that you or someone else could enjoy the pleasure of being first this time.... You're welcome.
Yes! More money to spend
@@KevinTalbotTV BOOM!
@@audiwankenobi361 sure buddy
The high adjustment screw (or throttle screw) is the one closest to to the air filter. The screw closest to the engine is the low (or idle screw). There is a thin wire that goes to the coil (not the one that goes to the spark plug) it must be grounded to the engine to kill the engine. Follow this wire and check for a loose connection. I hope this helps.
boost
The channel needs more 5th scale content like this 🔥
I agree.
@ZAC HARDLE really a waste of time and money unless you have money and time to blow would require alot of modification I've asked and seen similar asked in some 5th scale groups and forums, plenty out there that's a direct fit and not oversized that would out perform that 110 in most cases
Yes
Yeah cus that was so cool? Lmao that was so dumb
@Richard Ward how? Yeah it didn't go so well but nobody's an expert but if you are feel free to share that knowledge my friend
I don't think people understand how much effort, work, and time this takes for Kev to do what he does. He fully deserves all his success, he's less than 0.1% of the population who have this in them. Admiration.
I agree…. I never knew how to properly appreciate content creation and what a “great video” takes and what it means.
I’ve changed my perspective ever since I started treating my Chanel as if raising a child and how to put my viewers before me.
@@toysforboysrc great to hear 😊
@@tomothybahamothy … Good jobs are supposed to be easy, that’s everybody’s dream. The hard work comes first and the payoff comes later after sacrifices are made. Whether the students fail or succeed is on them. Kev obviously took courses and read books so obviously some people are cut out for this career and some aren’t, that’s just how it is🤷♂️
Kinda easier to do when it's your hobby
the fact that he built a monster truck just blows my mind
Do a monster slash build
Yes we need that
Traxxas slash? That would be epic
@@shepshepson yes slash
something more ppl could relate to lol
Fr
I just love how Kev's "failsafe" is full throttle 😂
😂
Finally a big 2 stroke petro engine that moves a vehicle like it's supposed to.
I feel sorry for Kev, because he can’t experience the excitement us fans have when we see that notification 😄
thats true lol
He gets the same feeling from porn hub!!!
So true.. by far the most entertaining creator in my subscriptions!
I’m sure the feeling is comparable when the views start to come in👀
No matter who you are there is still someone you will idol. Me definitely Talbot. What happened ¿? Lol
I would try a different kill switch. Killer bee is the one I use. Also you’re geared to aggressive. That is why it was heating up like crazy. Also you probably should break the motor in proper before ripping like that. Just my take.
Kev, on my dirtbike filter I only use 3 drops of air filter oil as per manufacturer instructions and rub it in. If it's too saturated the engine will run inconsistently causing you to chase the tune. Not sure how much oil you use but it seemed a bit much for such a small filter. You want just the outer surface saturated to prevent dust particles in dry conditions from going in the carb. With that said. That is a sick build!
Which brand? I don't know of any of the major brands recommending underoiling filters by that much. Most recommend to saturate it, remove excess with a towel and then let it dry (yes, air filter oil dries a bit and becomes even more sticky through that).
When i rode motocross for the crf 250 i drenchd the fikter then squeeze exess out let it dry a bit stick it in
That exactly what I've had happen to me, because the filter is clogged up with oil it effectively works like a choke and screws with the air fuel ratio.
@@RyanMcIntyre I think it actually comes down to the size of the engine, the smaller the engine the more sensitive it is to changes, especially with the intake side. Dirt bikes are probably better off with a drenched filter.
@@RyanMcIntyreSo you're saying my alcoholic father wasn't supposed to leave a rag in the air-boot and then put the filter on? It really smooths the power out. LoL 😊
Man these 5Ts hitting jumps and taking flight is something else!
Foreal cause i dont want to do it to mine lol
your break in process is quite unique 🤣🤣🤣
Haha Kevin is like a kid in a candy store. When he gets excited then we get excited too... I was thinking the chassis was not going to hold up with the weight of that bigger engine. LOL Kevin cannot resist big jumps...
You make building these things effortless. It would take me days of trial and error to get this one running😂
If you get a engine too lean it actually starts dieseling (tip of the spark plug actually glows)& won’t stop even if you pull the spark plug cap. the best thing to do is hit the kill switch &open the throttle this will dump fuel in & cools the engine. Or just cover the intake with a cloth
If a 2-stroke engines doesn't wanna turn off, you can always just block the exhaust, like put your shoe against it or something. Saved us and our engines many times! ;)
Mesin RC car nya....tenaga nya...tenaga monster....mantaaappp brooo.
that metallic sound is sometimes mentioned as the engine seizing sound, especially when not runned in engine gets hot, that is like number one thing that should not be done to new engines, but it could be just some random stuff rattling around in there... by the way, try to put some stuff into the front and rear diffs, they are still super loose, especially with that overpowered engine that blew the tires pretty much right off🤣
That metallic sound is the motor bearings that could have been damaged by taking such a big heat, it happened to me with the rc gas boats
Nothing like waking up on a Tuesday to watch a some KT rippage!!
It was always gonna get a hammering when he went out with max 😂 chassis bent already, at least we get to see it bashed at the skatepark now 😂
Lean with no load can cause runaway but if the kill switch works it could be a loose carb or case leak
Kevin, you are an expert by the way.
Not sure what kill switch you are using. But I have hand many brands and they are not all equal. Sometimes you need to reverse the wires to the coil. And you can have less interference.
It's going to absolutely rip! The differential to pieces
5th scale is awesome but they're so loud! Especially if you have upgraded exhaust.
You definitely need a good place to run them if you want to be considerate to your neighbors 😂
Thanks for all the AWESOME content, Kevin!
That Taylor RC engine looks like a BEAST! I’ve been fixing/repairing small engines like in strimmers and lawn mowers and so on for years now and I get that sick of them, all my own equipment is battery powered now. Same with the RC cars. Awesome to get going but spend more time pulling the starter than driving the damn things.
Exactly it isn't worth the hype. Gasoline/Nitro rcs are a pain in the ass!
Heat up the motor with a heat gun. Never try and start a cold motor.
Max really does break everything!
That RC car is more powerful than my car...
I look forward to these particular videos....they really do act as a great reminder why I never want to own or run a Nitro or Petrol car ever again...
Ask Taylor what the run-in carb settings are. There should be a certain number of turns out from all the way turned in. For my chain saws its like 1 to 1-1/4 turns out for the L and H. the 3rd is your Idle speed that you can adjust to your liking. You would think something like that would be included with an engine of that caliber.
silverhaze78 ya i agree i don't know much about moders thats because im 13 but ya
It's 2 and 1/2 turns out from bottom !
I just love this guy's videos!
Putting wheels on an huge engine regardless of the scale is always fun 😂😂😂❤
Wow Kevin I can believe The engine did that too you!!??? I do know why because you got trigger happy as soon as it started running...you should of ran it in proper!!! Lol but what do I know!!! Your the man Kevin!!! absolutely ran the Balls of thats new engine!!! Great videos as Always man!!! Thanks for your content!! Outstanding
It is always wonderful to see how much a vehicle can take by bashing it as hard as you do. I would like to see everybody do some races together again!
kevin everytime he does something stupid: BEAUTIFUL!!!!!!
this car is absolulely , i have this car too , but the original.....😁😆😉👍👍👍
Kev. Nitro and Petrol cars go into a lean condition when the tank gets below 1/8th. We used to run a large in-line fuel filter on our cars and trucks to help that lean condition be better by aerating the fuel better. Also you can get a fuel line pinch kit to shut off fuel flow so the engine will stall if the kill switches happen to not work again in the future. Cheers.
So crazy idea for the tuning but kev what if you take the nitro/petro cars to a car tuning shop or a dyno company hook it up to a o2 sensor to get air fuel ratio challenge then to tune it or get a Holley efi box and run the o2 system that way in the shop
What a monster sized engine. Wow!!
HI Kevin huge fan I love Rc cars and planes so much I do have the Losi Baja buggy and a sc10 RC truck my uncle got me in to this hobby I started when I was 5 I enjoy RC's so much
I want to see that giant engine in the smallest car possible!!!
I like that idea too
Hell yeah Kev! Keep this content coming we love it ❤
Big shout out from your Aussie brothers !
Not sure if you will read this, only because you are such a big channel, with tons of comments all the time. But I love this channel. I had a "main channel" that I was working 40+ hours a week, with very little to no growth on it. I sort of quit that channel, and started this new channel about my dogs. And when I did, I found your video of the German Shepherds chasing your RC car, and ever since then I have been hooked. Using your channel as a guide on what RC car I should spend my limited funds on for the most enjoyment for them. I believe I will be saving up for the Traxxax Maxx. Why not go all the way right? Anyhoot, I love your videos on this channel, and find so much joy and pleasure out of watching all of them. Now, let's go RIP!!!! YES!!!!!!
Yes!!! My buddies and I were just binge watching your videos last night. I got them hooked!!! Let’s get them Tumble Wumbles Mr. Talbot!!!
As others have said, we def need some more 1/5th scale content with speed running and bashing these monsters!
Would be fun to drop the biggest and most powerful engine you can find in one of these 1/5 scales and let it rip!
Cheers Kev👍
With Spektrum radios, you have to remember to re-bind after you get done setting up your radio sub trims, trims, travel, etc. The failsafe servo positions are set during binding.
lol - brilliant Kev. I think you prolly need to look at the amount of oil you used for the air filter? Thank you as ever!!
That thing sounds sick!! Bloody awesome
Love your videos!!! Watch them every day on my lunch break! Just got my first 2wd slash and building a 4x4 now
I love watching your videos from south Australia keep up the good work😊
I’ve been watching for years
Kevin! Things are getting out of control with these motor sizes. Next I expect you to turn the Lambo into a "full size" RC car.
Love it mate jumping this beast like a 1/10 scale 😂 awsome vid and taylor rc absolute best just purchased his outlaw 88cc absolute beast would love to see you do a review on that 👍
Kevin, does Taylor RC make a muffler like that you can put on the Raminator so it's not so loud?
We want more videos 😊
❤my favorite channel thank you Kevin for your shares have a nice day 👍
Absolute monster! amazing stuff indeed 👌
hah, Kevin has built a monster again~ Always feels relaxing to watch how Kevin assemble his new rc. Another topic is I've bought the official Traxxas Steel CVD upgrade for WideMaxx, and a Yeah Racing Universal Set-Up System for on-road cars~ both of them are good companies!
More gas and nitro videos please ⛽️👍
Best sounding engine so far.
Kevin I had your same symptoms happen on an Honda 85R to some kids, the only way I could get it to happen was get it hot in 1st gear. What it's doing is heating up and advancing the timing and running away. Which can also happen to an engine braking in with in adequate air flow, or making pulls or hits without making a few breathing laps. Hope this helps
Thanks for the great content Kev, been a fan for a long time.
Petition for Kevin to grow a mullet he half way there
Say “I” if u love kevs vids and thinks he’s a legend 💪🏻 😊❤
Your videos are so enthusiastic and amazing!
Love your vids!
You might need to put a valve shut off for the fuel line for an emergency shut off
Just casually ripping the local football field up 🤣
I just happen to be working on my 5T when I got this notification. I feel like that makes me special. Like me and Kev are connected man. lol
Kev , the runnaway could be caused when the car is to far away from the trasmitter and the throttel servo is stuck on gas and it runs away, and if you get to your car then it connects again because its in range again it works. Second reason is a weak battery in tramsmitter or car. Nice vid kev, this engine rips,
Have a nice day
The radio fail safe is used in that case
So the throttle servo should be closed whenever the receiver loose signal
Probably a weak or discharged battery is the problem ( but the kill switch detect it and stop the engine )
Control was 5' from the truck
@@ramsay4804lol right
The runaway was due to the engine rather than the electronic components. Cutting off the air to the engine would've done the trick.
Sorry you had trouble Kev but thanks for another highly entertaining vid! Love watching your content brother!
Glad to see Kevin finally upgraded from stanley tools to milwaukee tools
That was over power 💥
Every time you do a video on a gas (petrol) RC and I think "finial maybe this gas RC will be reliable", you just keep proving why electric is better 😆
There is no better or worse in rc
Hey Kevin, I'm very curious about something. Why don't you ever shoot any videos at that "ARC" place I think it was called?? I could be mistaken on the name. It had all the green carpet stuff as the track? That place was pretty cool 😁👍
We’re going there soon
The power of these cars is incredible…. If you tried to rip that tire that blew, by hand? (without heat or acetone) you’d need some CRAZY power
Hey KT! That's a Awesome build on the 5T and sounds great with that pipe! When You and Maxx get together running rigs it doesn't usually end well and the run-in on that New engine running lean and low on gas and running on its own and that runaway you got Lucky you didn't wad that machine into a another pile of parts? Totally Great video and content, good luck on figuring out the issues Bud!😉👍📹💯✔️👋👋👋😂🤣
Hi Kev, this comment to not relate to this video specifically, I just wanted to thank you for getting me into the hobby. I am a complete newbie so the obvious first car was an 8S Xmaxx 🥴as it was second hand from eBay I have had quite a few of the retaining nuts on the plastic chassis strip. So I thought I would share a tip to the solution I thought off (apologies if you have done this and I missed it). Anyway, I found if you have enough area you can drill out the old hole and insert a metal furniture retaining nut using a hex driver. The bolt will then have a solid metal fixing. I hope that might help someone out. I'll put a link in the next comment as I believe sometimes they get blocked.
"Today we're replacing the engine wiff a hydrogen reactor, see how fast it is and go for a bash... Yes!"
She's a big beastie to not check failsafe and you a Heli pilot too 🤣.
I bought a T-maxx a few years back, it got about 50 yards from me then went full thottle and vanished, found it a few feet from a lamp post with the whole front end smashed to peices. turns out it went out of range and full throttled itself haha, this vid brought back memories :D nice one Kev!
Those must so much easier to start and keep running than nitro. I love nitro and had great runs with them but they can sometimes be impossible.
Edit: As soon as I post this, the engine develops and air leak. The biggest issue I’ve had with nitro! Hahahaha so frustrating! 😂
I truly love seeing his content, but most of all I honestly love seeing his subscriber amount go up, love to see it, love to see him succeed
I’m so glad that he made another video of this car
I am inspired by you for collecting rc cars😁😁
Kevin love your work mate.The content is unreal.Cheers from Australia 🇦🇺
Hey kev,love ur content mate.if u want a bashproof/kevproof chassis recommend looking into the UFC performance chassis.
Why does kev looks like a mad scientist that just woke up from his bed
next put a car engine into it
How long till Kevin is saying “today we are putting this Chevy LS corvette motor in this Losi 5T!”
You make this look cool and fun mate. Great video.
"I couldn't resist it... it went to the moon" LOL
That's the sound of an R.C. Car begging for its life and pleading for Kevin to not torture it anymore. You made it cry and beg for mercy!
Time to do some really good upgrades for it (Losi 5T) I like that rc
Everything he has is overpowered ib swear
finally a new video for this rc car ohhh its chrismas every day
I love your videos Kevin! Your so cheerful and the videos are the best! ❤
Morning Kevin
The yes is my favorite
Beautiful maybe try plugging pipe? Pinching gas line? And to start maybe prime it?