Gas Cooktop Natural Gas to LPG Conversion by ezy2learn
Vložit
- čas přidán 16. 04. 2019
- Here's DIY Off Grid Stove Conversion - Natural Gas to LPG
Please check the approved gas type sticker attached to the gas appliance and make sure it is suitable for use with Natural gas or LPG.
Generally, gas connection must be carried out by an authorized person.
#ezy2learn #ezy2learnDIY - Jak na to + styl
I'm going to be converting my whole house from propane to Nat Gas tomorrow. This was very helpful.
You are welcome
Thanks for sharing this. I quickly got an idea of converting NG to LPG. Thanks again for the video
Very helpful and precise method of convertion. Thank you for your painstaking work more grease to your elbow.
You are very welcome
This is a great video. The instruction is very clearly. Thanks for sharing.
You are welcome :)
Thank you for the smartest video ever made on the subject.
Excellent , very helpful !
This is a great video. Thanks for sharing.
very helpful for australian market, exactly like I am using!
Glad it was helpful!
Very useful thanks. I have a Belling range cooker that I want to convert to LPG. Do you have any videos on how to do the Grill ? Thanks
Very helpful gas plumbing information thnk u
You are welcome
Excellant video, very informative.Thanks
This video is very helpful but I have a question.. Would you have to change the oven to LPG the same way if it is a gas oven and stove top in one?
Thank you for the demo s real big help thank you.
Glad it was helpful!
Very helpful thank you.
Thank you for this video mate.
What is the standard hob top inlet size?
As looking for a female BSP Fullham nozzle to 8mm to connect the LPG hose to the hob.
Probably half an inch right?
Thanks very much for your help!
Thank you for this. Any advice on how to remove a stuck nozzle? The gas fitter can’t remove one nozzle from a new cooker. He’s tried 2 times. Thanks
hi,
how many turn on the screw if converting from g-20 natural gas to LPG? Also, the pressure regulator shown under the top, is it something that comes with every gas hob or we have to buy separately?
*yes this was very helpful wish you would have connected it to the tank and showed us how it works*
two thumbs up!!!
Thanks :)
Very informative
Best video until now 😉
Thank you
about turning the screw clockwise for the flow LPG conversion.did you just turn it all the way or half?thanks
There's no exact scale of turn the gas flow screw, but you need to turn the screw clockwise about half way or a bit more until you get the correct length of flame for each burner (blue flame) not yellow or orange color.
I would like to connect a cylinder hose and regulator instead. Could you give me detailed information about which one I should buy for a Gasland chef cooktop GH30SF? Thanks
I looked up Gasland Chef GH30SF but it is not available in my location. but what's the problem exactly to connect a cylinder hose and regulator. Please provide more information about issues you are facing and I might be able to hel you. Thank you
In this stove where is air/gas mixture, or air shutter ?
Question friend, how about the plug wire, the black one, what happen, are we going to remove that, or nothing. Thak you and God Bless, more power to you.
Did you mean the electrical cable? if yes, then you don't need to worry about it as it is used for ignition only and it is not connected to the gas source or type!
Is it necessary to have 2 regulators? One that comes with the stove and the other that’s attached to the hose in order to safely operate after converting from natural gas to propane?
Did you find an answer to this by any chance?
I was thinking the same, as on a house set-up natural gas or LPG, both set-ups have two regulators, one at the stove and one at the mains/ LPG bottle.
Good video
But I need for my stove model GMF7522Ixl
Hey, any particular reason why we need to swap these nozzles and how important is it? Only reason asking because I’ve just ordered my mum a hob for her new kitchen and she lives in Sri Lanka, when I mentioned swapping the nozzles to the kitchen designer he said he'd never come across before, so I'm just wondering if this is really necessary?
Nozzle swap is required if you are changing from LGP to Natural Gas or vice versa. As LPG is thinner and requires tighter nozzle hole, but Natural Gas is thicker and requires bigger nozzle hole to work properly.
If your hob is designed for LPG and it is going to work with LPG bottles, then you don't need to change anything. Thank you
@@ezy2Learn Thanks for getting back so quickly, yes that makes sense. I have ordered it from a well-known online retailer in SriLanka, as they don't have central gas there, I'm guessing the hobs will probably already come with the correct ones, but I'll double check. Thanks again - much appreciated!
Ok yes, what I mean is the cord black, are we going remove it or not? Because, when I was in abroad from Italy, I bought one unit of stove, I've already change the 4 small hole orefice, Now I'am here in my country(philippines) so I want to install it, but first of all I show your demo, so I'm interested to see it, so thank you for sharing your talent, and more power again friend, God Bless.
the back cord is required to ignite the stove unless you want to use lighter or matches to start up your fire.
My mobile home is on Propane. There is a propane regulator right off the propane tank. Do I still need the regulator supplied with the stove?
no, one is enough as long as it delivers the correct pressure to your stove, usually it is around 2.75kPa
Wouldn't you configure the regulator first and then the dials? Why make flame and height adjustments at the dials and then change the regulator?
Ok, you are right about that one :) I just wanted to say that you can adjust the flame from dials not from the regulator! my apology
@@ezy2Learn How do you know that you have the correct orifice valves?
@@robertallison1449 Very sorry about the delay, I didn't see your question until now! every orifice valve has a number on it, that number indicate the hole flow size. Generally speaking, LPG is lighter in weight so, you will need to install small orifice with smaller hole size. if your stove is connected to NG and it has 4 burners (1 large burner, 1 small burner and 2 medium burners) you are going to convert it to LPG, then most likely the orifice that was used on NG from medium burner will work perfectly on the larger burner with LPG!
But if you want to further details, you can search online for orifice size chart and it should explain it. Thank you
Where to buy ge gas conversion kit idaho falls
What is the fitting connection required to connect standard gas cylinder hose to the elbow fitting you have? Can you please advise the name/size of fitting connection on each end?
elbow fitting is standard ½ inch (15cm) Australian size plumbing elbow. You may connect your stove directly to a Gas regulator as per video which is ½ Female both sides then direct gas hose to your gas bottle or you may connect your stove to gas bottle using a gas hose with builtin regulator like the BBQ one, similar to this one:
cdn.shopify.com/s/files/1/1861/0291/products/Untitled-1_d4c05e0e-35d0-435f-9735-12d80b9ec63f_1400x.jpg?v=1527207756
@@ezy2Learn yes I want to connect this regular bbq hose to the 1/2 inch fitting but not sure what fitting to buy in between cdn.shopify.com/s/files/1/1861/0291/products/Untitled-1_d4c05e0e-35d0-435f-9735-12d80b9ec63f_1400x.jpg?v=1527207756
Is this regular bbq hose fitting 8mm?
I figured out... It is
3/8 sae male to 1/2 bsp female. Thanks for help anyway. Great video!
Hi I have attached my stove with a regulator on the LPG bottle. I’ve changed my burner jets. But I cannot see any access on my new off grid oven to adjust the actual oven and the flame there is too big and yellow
Any suggestions anyone??
Can you please help with a tutorial on how to convert an lpg deep freezer fridge to biogas🙏
Very helpful on the gas top there.
Good
Thanks
Which brand cooktop is it and where I can buy this same cooktop plz reply
I purchased that cooktop back in year 2016 from an online store. I don't have the original box for it to tell the brand name and I can not really remember!
Can't we use hob stoves without installation? Because it's not possible for transferable job.
Yes, you can use it without installation, just make sure it is stable and gas hose away from fire. OR you can build a 20cm wooden frame and install it on top of it and it will portable.
@@ezy2Learn Thanks for your information.
@@ConnectingNatureAndPeople you are very welcome :)
Can any oven be converted to LPG gas
ràymond ford just change the noozle...NG to LPG
What are the tools names plz 🛠️🛠️🛠️🙏🏻
Plz tell me this cooktop name and address I like this an i wish buy this cooktop plz tell
I bought it online years ago and I don't remember seller name
Sir cooktop par bhi brand ka name nahi hai ??
That was purchased years ago and i don't remember the brand
Is Lpg propane?
LPG =liquid petroleum gas is the same as propane
What is the benefit of this method?
Converting Natural gas to LPG
You need to convert a natural gas appliance to LPG using the jets provided with the appliance because if you don't, the existing natural gas jets will put too much LPG into them, and you get an uncontrollable flame that produces huge yellow tips depositing soot and carbon on pans and kettles along with a horrible gassy smell emitted.
Jetting a natural gas appliance for LPG bottled gas and propane tank supply ensures proper operation and safe use.
Ise jra hindi me btay please
I don't understand, sorry!
He wants you to do a tutorial in Hindi (Indian language)
Too much yapping
What do you mean ?
Very helpful thank you.