Convert old CFL into bright LED bulb

PLEASE SUBSCRIBE: / @hacktarget786003
Hello friends,
My objective with this project was to create a low budget and energy saving LED bulb for slum areas. Energy saving bulbs costs very high and are mostly not affordable for lower middle class families.
With the help of this project you can make your own LED light bulb with very low cost and you may find some of the parts at your itself.
you can use old broken CFL bulb housing to put to circuit inside.
the circuit consist of a few parts:
1 M ohm resistor
10 ohm resistor
470 ohm resistor
IN4007 diode x 4
100uf/25v capacitor
474k/400v capactor
and a series of LED's.
put all the parts together as shown in the video and your LED bulb will be ready to spread light..
be careful and be happy..
warning: While using this circuit be very careful because this circuit works on direct AC mains so there is a huge risk of getting electric shock. All information provided herein my videos are for watching purpose only. Any action you take upon the information provided are strictly at your own risk. No one is liable for any loss or damage in connected with the use of information provided on my videos.
PLEASE SUBSCRIBE TO MY CHANNEL, SHARE THIS VIDEO TO YOUR FRIENDS SO THAT THEY CAN SAVE MONEY TOO..
THANKS FOR WATCHING ..

[@miteshdhanani]

As u have made it but if we want to use half of the leds,bulb then any changes to be done

[@arghadipsarkar7125]

I used a old mobile chargers circuit.....it done

[@minazahmed6198]

it worked for me . thank you so much ..

[@ramonsikdar6341]

Thanks brother. 1m, 19 ohm aur 470 ohm registance ka work Kya hai? Please

[@sanjayaratti2236]

Sir in resistors ke aur leds ka watts kithne kithne hai..

[@aneespristine]

Nice Vedio but pl upload a circuit diagram with detail of parts and what is the out put voltage dc voltage 5 or 4 or 9 or 12v inform me please thanks and also 10 nos bgr led series or parellel works with dc 12 v or ac please upload bye

[@bappaghosh9286]

10ohm...470ohm kitna watt ka he????

[@YouCanCode]

its not like that .....this capacitive supply has not enough amperes to light that much SMDs.....it gives few mA......

[@YouCanCode]

this capacitive supply will only power two normal LEDs or one SMD used in this video.

[@deepvikash91]

Led bulb ke bare me batao Bhai kitne mm ki hai aur kitne watt ki

[@kuchbhimushkilnahiladdi810]

Sir Ji video bahut acchi hai aur usse dekh kar koi bhi Bana sakta hai sir ji ek aap se vinti hai aap bol kar video Banaye ICSE Ne ladke dekh kar aasani se LED light bana sakte hain aapka bahut bahut Dhanyavad hoga aur aisi video Banaye

[@ShakilKhan-ij4gp]

What's the output voltage in this circuit? Plz tell.
Thanks

[@cosmefulanito5933]

120v? 220V?
??????

[@amiyabodak8831]

Bhai 9w,12w,20w LED light dekhaiye.

[@alliswell8934]

ye led kidhar milte hain

[@pankajbajaj289]

led kis base p lgai hai base kya use kiya led k liye silver kya hai

[@pankajbajaj289]

HackTarget thanks bro

[@pankajbajaj289]

HackTarget kya aap use dikhaynge ki kese kya kha lagaya hai wts p msg kr k agr bta sake ya yhi rpl kr dijiy pick heat sink to smjh agya bt rotor jo motor ko chlata hai wo hard disk m se niakala wo nhi dekha ek baar agr dikha jay to

[@pankajbajaj289]

HackTarget yes bro [e-mail]

[@poiiihy]

song name?

[@HackTarget786003]

Dutty

[@gauravmathur.1989]

Please music band karo or bol bol kay btao ki kiya kha Lgan ha...?

[@mahboobahmed3638]

Nice video but audio is also needed.

[@Brainyarts]

Hi

[@englishgrammarclass6406]

ALOBATERESA চালতাহে🚴💡🌘💡🔊

[@rafiqueuddin7215]

Led ke bare me btao n bolkar bnao

[@thirumalaikumaran1015]

Circuit diagram podunga ggg

[@sanjayaratti2236]

Reply kare plz..

[@poiiihy]

too much cheese at beginning

[@funktime3250]

Audio to de vai

[@funktime3250]

Kaisa soldring karta hain ..+ - sb kuch bol chahiya

[@khawardesivlog]

Bi

[@khawardesivlog]

Mere pas 12 w ld hy wo kese chalye 220 pe

[@CMSED59118]

Fake hai ye sab
Mane banake dekha chuka hu