Ford emblem replacement on 2013 Ford edge front grill
Vložit
- čas přidán 13. 09. 2024
- I'll show you how to change a 2013 ford edge front grill emblem do's and don'ts, if not you will be mad that you broke something and have to spend more money.
Buy me a coffee ☕️
www.buymeacoff...
STICKER SWAP see below ⬇️
and please watch and like another video it helps the channel. Both in growth and monetarily.
🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻
and don't forget if you enjoyed this video hit the SUPER THANKS button and help out with future cool places to see. Any money donated to my channel goes right back into the channel.
🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️
If you would like a TriGogglin hat pin. It is $10.00 includes shipping. Send it to the address below, and I'll get one right out to you.
🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻
To support my channel, stop by my stores and buy some "Merch" add to that mug collection.
teespring.com/...
Or you can Buy me a coffee ☕️ donate at
www.buymeacoff...
and help me out with future fishing trips and future builds, for glues, paints and such.
🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️🔺️
I am also doing a sticker swap, or a sticker purchase. Place your sticker in a self-addressed stamped envelope, and I will return mine to you, or if you would like to purchase my sticker place 2 Dollars per sticker in a self-addressed stamped envelope, and send it to the address below, and I will return my sticker,
Pappy
PO Box 523
Pataskala, Ohio 43062
Thanks again for stopping by and watching replacing 2013 Ford edge emblem.
Thank you for making this informative video! My husband will be super impressed I just changed out my emblem all by myself! :)
Thats awesome, so glad I could help... he will be impressed, but at the same time glad he didnt have to do it 🤣 don't let him fool ya... glad I made it so you could. Hope your day is well...
Wow. You are a genuine certified genius!! Turned a mind bender into a 10 minute project! Thank you
Very welcome Chris, so glad I could help you out.
Thank you. This video helped me a lot. I just put an black & white American Flag style one on my wifes 2012 Ford Edge and woulda def snapped something if i wouldn't have found this vid. I first started using a thin, flat metal scraper like what you remove old dry paint with... 😂 And then i thought about using floss next but figured I'd google it. I def needed to loosen the front and reach in and push the clips to remove it. You're the man!
So glad you found this helpful, I have seen that flag emblem on an F150, it's nice, gonna look sweet on the edge. Appreciate you watching and this comment
Hey buddy, thank you very much for sharing!!!! I'm gonna instal a front view camera, replacing de Edge bezel by rear bezel of Ford Ranger, and your DIY will help me a lot! Bests!!!
Awesome, glad, or hope I helped a little, hope it works out well for ya, appreciate this comment and you watching
thank you for making this video.
Step by step , excellent
Very welcome, Glad I could help, appreciate you watching.
Great video-thank you! HOWEVER, taking off the manual thread nuts over the plastic posts are mandatory BEFORE trying to take the emblem off. I spent 2 hours, being careful I thought, but scratching the chrome plate and plastic behind the emblem trying to leverage the old emblem withrough breaking the tabs, following this video to a tee, and it failed me =( I used a socket wrench to remove the nuts but it would've been easier to snip them with cutters. One fell immediately and I couldn't retrieve it inside the grill panel somewhere. They are cheap but shipping will get us. Bruises all over my forearms, and ended up using the tape on the back anyways.
Sorry you had so much trouble. I have done 5 of these and only had 1 that gave me a problem with the silver tabs, they broke and had to get a whole new bezel. But the other times it worked as I did it in the video. Wish you had better luck with it.. thank you for leaving this comment for others to see they may have problems as well... appreciate you watching..
Thanks for the video. Much appreciated!!
Very welcome, glad I could help.. appreciate the comment and you watching
BA BAM!!!!!!! LOVE IT. GREAT VID.
🤣🤣 thanks I appreciate that. Thank for watching..
Came across this because I just bought a 2013 Edge with a completely faded emblem, while the emblem on the 2010 I’m replacing is still in perfect condition. Must have been before they started making them with cheaper garbage lol. I’m gonna go see if I can swap them now!
Sure hope it goes easy for you. Some folks have reported trouble with the plastic screws on the plastic shrowd
Is there anything you can't do? You amaze me. Off to see NS night train
Lol, thanks Dave, I appreciate that, if I can't do it, I sure try to figure it out, thanks for the compliment.
Thanks, loved your video very helpful
Thank you, glad you found it helpful.
What size emblem is that? 9 inch?
Great video, nice job explaining how to NOT further damage anything by just trying to pry and yank it off.. very good details.
Thank you, appreciate that, yes if I remember correctly it was a 9 inch..
You can replace mine next 😋 but really thanks for the info great video!
Thank you, bring it over ill hook you up lol 😆
Thank you!
You are very welcome, glad I could help in some way, appreciate the comment.
good vid and goods job stay safe lee
Thanks Lee, thought it would be worth the share.
Thanks man!!
Welcome hope it helped
THANK YOU !!!
Very welcome, glad I could help.
Thanks for the useful video, just a quick question is front emblem same as the emblem in the tail? I mean the same part can be use front or back for the ford edge 2014?
@@user-qv6jt9km6e ooh, good question, unfortunately at this time I can not answer that. The rear emblem, I've seen a few that are just flat on the back and stuck on with sticky tape. I'll have to investigate further. Hope you find an answer. I'm sure there's a video out there for the rear emblem. Appreciate you watching
@@TriGogglin Thanks for your reply, do you have front emblem part number?
Didnt get a part number, I just went onto Amazon and ordered one..
Looks good now 👍
Thanks, yeah the wife is happy now, this was her car.
good job Pappy., but it's still a Ford....LOL...hahaha... thx 4 sharing.. vinny
Lol, Vinny, thats what my brother says😜 thanks for watching.
Looked straight forward. Unfortunately the four screws did not back out and when I got my arm down in the opening the two bottom tabs did not move and the top tap broke off with little force put on it. Project abandoned.
Yeah the 4 screws, the plastic gets old and the screws spin in place, you can put something between the plastic, like a screwdriver to apply pressure to help back them out, same with the tabs, they getting brittle, but you can use double sided sticky tape for the crome bezel so you don't have to but a new one. Or I have seen people screw the bezel to the grill, then use the sticky tape to apply the emblem.. sorry you had a bit of trouble.. but the video is an example of when everything goes like it should.. and that did not happen for you.. that usually happens to me.. lol I appreciate you watching
Thanks for the quick reply. I had tried to apply pressure under the plastic to aid in removing the cowling screws but that did not seem to work. Maybe I will try again. Much appreciated!@@TriGogglin
Always something, my dad would always crack the joke, Ford had a better idea, 🤣 cause something was always a pain in the rear.. sorry i can't be more help at this point.. hope you get it taken care of..
I can’t get the bezel off to save my life… the two side tabs I think are loose but I can’t the top tab to move. Any tips?!
The top tab is a push up, I find if you do that one first the 2 bottom ones are easier to do, so pull up on the top tab while trying to push it out the hole at the same time.. thats the best I can tell ya.. just try not to break it.. good luck...
That happened to my Ford front emblem ‼️
I think it’s literally ALL of them. The clear coating on my entire car is peeling.
Yeah just about every one i see lately is like that, poor quality. Company's are getting cheap.
Wow it's looking pretty shiny I have some good news regarding the abandoned Rock Run Branch rail line it looks like some of Ohio Central's train crews have been up there recently removing the brush and debris off the rails and ties by the train trestle so I don't know if they're going to reactivate the last remaining portion of that line for train car storage again I know they used to store train cars on that line several or more years ago before it came overgrown with trees and brush and debris
Oh wow Austin thats great news, thank you, I'll have make sure I check it out when I'm back that way. Thank you for the info.
@@TriGogglin You're welcome maybe you might stop by there sometime later in the fall and I'm going to try to go down there again on November 2nd while I do some fishing at Raccoon Creek for the first time and I might attempt to try to walk across the train trestle from one side to all the way back God wants me to do it and he knows I can do i I still don't know how my aquaphobia would do
@@TriGogglin This might be for the future I remember years ago Ohio Central used to store train cars on that line from Zelora Avenue and raccoon drive to near Ange's pizza and the train trestle itself is still in pretty good shape
@@TriGogglin You're very welcome I might have to have a talk with one of the train Crews if that's what they're possibly going to do it's better to see it be reactivated for train car storage instead of becoming a bike trail
@@TriGogglin Good luck one of these days I might see you
Can you please tell me from where have you brought it
I purchased it on Amazon. Thanks for watching
Now that's lot cheaper than buying a new car. How long did it actually take to change the emblem? From my experience it would of taken half a day because that 10mm socket always goes walk abouts with the 9mm.
I'll have to remember this one is I ever buy a Ford again.
Both Ford and Chevy (GM) killed 2 of Australians iconic cars, the Ford Falcon, and the Holden Commodore V8's, that were designed and built in Australia.
Oh man Arty, loved the falcon. It didn't take that long at all, but all fords are not the same, the next may be different. And yes it's not my 10mm it's always my 13mm thats missing. 🤣
@@TriGogglin My 9mm always disappears first, and then my 10mm joins it, and they will show up a week after the job is done.
I didn't like the shape of the last Falcon they made here, as they went with the Mustang shaped front.
This time of the Year there was always battle lines drawn in Australia, between the Ford Falcon fans, and the Holden Commodore fans in the V8 super car races. Now it's Ford Mustang with Mercedes, Audi and BMW. GM haven't entered yet, as they don't have anything decent in production to race...lol
My whole emblem fell off… just missing .. I noticed a lot of edge’s are missing they’re emblem .
Yeah that sucks, I'm a Ford fan but they dropped the ball on there emblems. They either fall off or turn aluminum foil silver. Horrible just Horrible. Appreciate you watching
Great how to!!!!! Instead of a Chevy, you could go Dodge! Lol, if it runs keep it!
Thanks for watching Eric, everything i own is Ford, my garage is even painted in ford colors, lol
Where you bought this brother
At the time I got it off of Amazon. Pretty cheap too.. thanks for watching hope it helps you out.
It's a Ford, Pappy, what does it matter? LOL
🤣🤣 hey now lol 😆 😂 I'm a ford man thru and thru. And I use them and beat them up, but that is my wife's car and she can't stand a scratch or especially the emblem messed up so had to fix it lol, thanks for watching Robert.
@@TriGogglin LOL
Saves yourself $200 for FORD to do it 🤪. Nice tutorial on replacing it yourself.
Thanks Jerry, yeah didnt want to waste a good opportunity.
Unnecessary. You dont have to remove the bezel from the truck at all. Grab a 10mm ratchet, shuv your hand down and remove the 2 10mm nuts and the ford logo falls right out, put the othet one on, put the 2 10mm nuts back on the new one and done.
2mins job. These extra steps are not necessary with all the popping out tabs nonsense. NOT NECESSARY! 🤦🏻♂️
Thanks for your feed back, it may not be necessary for you, maybe your an expert. But seeing how you have no how to videos yourself i doubt it, But people rely on youtube for many do it yourself jobs. I have seen friends and family break that bezel cause their first instinct is to start prying on things and break stuff. So this video is not for professionals such as your self, but for folks that don't really work on things and want to attempt it and save a little money.. but I do appreciate you watching, and maybe someone will read your comment and do it your way. So you in turn may of also helped them.. thanks
@@TriGogglin in all honesty, avoiding those extra steps will make the job easier, dont need to be a professional. Its more likely you will break a tab by following your steps to remove the whole bezel in order to remove the logo, leaving the bezel in place avoids breaking any tabs and more work for that matter. Reach in, undo the 10mm nuts, and the logo will pop right off👍
In the future if I do another one. I will make a video trying that way.. it does sound like it eliminates the step. And I can see what your saying about breaking the bezel tab, that would definitely suck..
Si funciona como dice el amigo, quitando los tornillos 10mm sale el logo fácil
the problem is its a ford buy a ram lol
Lol Dwight, at least you didn't say Chevy 🤣🤣
My ram caught fire