How to Troubleshoot your Hoover Wind Tunnel (and make it suck again)
Vložit
- čas přidán 25. 02. 2021
- The bagless Hoover Wind Tunnels tend to have some issues. Watch as I share the steps to troubleshoot your Hoover:
1. Check your Filter. The filter clogs with dirt causing the unit to not function properly (won't pick up the dirt). The vacuum needs to "breathe". That's where the filter comes in. A dirty, clogged filter won't let the vacuum maintain proper air flow. Filters should be repleased every 6 months or so and cleaned in-between. Yes, you sometimes need to use a vacuum on your vacuum.
2. SECOND Filter. Yep- there are 2! This one is just as ignored as the first filter.
3. Check the Belt. On a lot of the wind tunnels, you can access the belt from the base. In this particular unit, the belt can be accessed from the top. Just because the belt is intact, doesn't mean it's okay. Belts stretch out, which results in your brush roll being impaired, and it won't agitate or pick up as good as it should. Belts should be replaced every 3 months or so (depending on use) for this vacuum.
Here is the belt replacement for the Hoover Wind Tunnel:
Here is the filter replacement for the Hoover Wind Tunnel:
FUN FACT! Lots of replacement belts have conversion numbers. We can guide you into a belt that will function properly but will be much tighter so the brusher will spin faster, it will agitate more, and it will pick up better overall!
4. Check the tubing. Start by removing the hose and try to drop a penny through the hose. For the lower tubing, use a special tool to check for clogs.
To get our special clog-removing tool, click here: www.vac.md/product-page/zip-i...
When you are vacuum shopping, one thing to think about is the design of the vacuum. When there are too many curves, dirt will get clogged in there as well. Then, you will spend money to get it unclogged.
Design Matters! We specialize in guiding you to a Vacuum perfect for your lifestyle AND we will teach you the ins-and-outs so you know how to troubleshoot any issues, at home.
For any questions, or to access our entire selection, simply give our store a call or visit our website!
www.vac.md/
Thanks for watching!
- Kimberly
Vac MD
(561) 558-9339
www.vac.md/
Follow us on Facebook: /
Follow us on Instagram: / vacmdboca
You are a star! I was about to throw the vacuum away but you have taught me how to extend its life. That sneaky hidden filter was a revelation. Thank you so very much.
You’re a lifesaver!! I’m living alone and adulting for the first time and you just saved me from buying a new vacuum
That’s so awesome. Congratulations on adulting!
Omg.... I can barely use a screwdriver and I unclogged the hose by myself!!!!! So informative. I used a plastic stick to unclog drains and out came a pen and a bunch of junk. Thank you thank you
I’m so proud of you!! Great job!
My machine was totally clogged, with no suction at all. This guide fixed it. Now, it works like a champion. Thanks!
Awesome! Glad I could help!
I love that this machine is totally able to be taken apart to fix clogs myself. I did not know where the hepa filter was located! Great video!!
Thank you!
Same thing here about the hepa filter and you helped me find the clog that I could not locate. So thank you very much! Very helpful!
This fixed my vaccine perfectly. Was exactly what I needed. Take your time watching this it’ll really be the reason you don’t have to spend 100 for a new one
Thank you so much for watching it!
NO. WAY. I had absolutely zero idea that lower filter existed!!!
I cleaned both filters out, and like magic, it works again. THANK YOU SO MUCH!
Great to hear!
Thanks for the demo on how to unclog the vacum hose. I followed your demo and now have a functioning Wind Tunnel. Great job.
You're welcome. Thank you for watching!
I had cleaned out dirt cup and washed our reusable filter but still not sucking up! This was an amazing video tutorial. Wish I could share the picture of all the dog hair clogs and cardboard pieces we freed up in the hose with your directions. Thx Vacuum MD!
I can imagine the dog hair you found. Thank you for watching, don't forget to subscribe!
Came to figure out why our brush wasn't rotating (I think our belt is old), stayed to watch you UNCLOG THE HOSE ermergersh so SATISFYING!!!
Awesome!
So I took the hose off like you said, and it was loaded! All because of a folded up post it note that couldn’t get around the corner of the hose and then about half a bucket of dirt came out that had built up behind it! Wow! Back in business! Thanks so much. 🤗
Great job!
You’re awesome. I wish every repair Or maintenance vid was as straightforward and thorough as yours. Thank you. 🤗
Thank you so much. I hope all of my repair videos going forward get such high praise!
I thought I already knew about vacuums, then I saw this video and learned so much.
Thank you.
🤯 right?! So glad our video gave you some education!
Super helpful and thorough. I did most of the other checks, even replaced a gasket that was torn. But did not think to even do the drop test, which showed me just how extensive my clog was (rabbit fur!!) Thanks so much for walking through the entire process.
Silly rabbit! Glad it was helpful.
Thank you! I just it at a garage sale for $5. Now I know why. It had a monster clog. Took over an hour to get unclogged. I just didn't know how to disconnect the hose. Now it works like a champ.
Great!
This made my day. I was able to fix my Hoover and saved $100 instead of buying a new one. Thank you!
You're welcome! Good job fixing it!
After checking both filters I watched this video. The little toys that were in the tube was the culprit. Thank you, I hadn't though to take the hose apart until I saw your video!
Great to hear!
Thank you so much for this! I usually would have my husband take it apart, but I realized I could do it! I can't believe how much there was clogging up the hose when I took it off.
Way to go girl! 🙌🏻
Thank you so much! I’ve just managed to unblock my vacuum cleaner - dropped the nail down the hose and found a blockage and had to use the long handle of a dusting instrument to force through a blockage and now have a working vacuum again
I took apart my vacuum and have watched 3 videos now. THANK You for having a well lit picture of the vacuum that you are working on I really just needed a good picture of the back to put it back together. I also learned where the other photo is.😊
You are so welcome!
Nothing like a nice lady with fix it skills,.This was helpful thanks. It's fixed now :)
Thank you so much, my vacuum stopped working and I drove myself nuts all day trying to fix it and was about to give up and take it to the repair shop until I stumbled across your video. I didn't have all the fancy tools just a Phillips screwdriver, took the hose off and smacked it on the ground until I was able to work the clog down to wear I could pull it out with my fingers, cleared it and now it works wonderful. Also didn't know about that bottom filter, will keep an eye on that thanks for the tip.
You're welcome!
Yay! Didn't think I could do it! but did it, with your help. Thanks. Saved me a trip to the repair shop.
Great job!
Great video and very helpful! Didn’t realize there was a bottom filter and now I know how to fix this belt, thanks!
Glad to help!
This video fixed my vacuum. Thank you!
You’re welcome! So glad to hear!
Thank you so much. I just fixed my vacuum with the help of your video. I was about to go buy a new one. Thank you for saving me some money 😁
You are welcome!
Hi Kimberly! This video was so helpful and educational. Thank you so much for explaining it so well. I was wondering why my Hoover Windtunnel wasn't picking up dirt and cat fur. It actually had a clog. Greetings from sunny California! 😊
Glad it was helpful! Thank you so much for watching.
Hey Vac MD when my Aunt had The Orange version of that Hoover Wind tunnel 2 Rewind I went to The extreme in cleaning it out that means I washed both hoses out and I also took apart the cyclonic filter assembly and washed it and the dirt cup and I even washed the hood's underside and the top too even the whole bottom and I used a leafblower to clean the Hepa Media Filter out and that's how I fixed my Aunt's Orange version of that Hoover WindTunnel 2 Rewind!
Good for you! That was nice of you to do for your Aunt.
Thanks! The couple who clean our house had sucked a microfiber rag into that hose S before but I'd forgotten about fixing that. You reminded me where and how to get it out when they blocked it this time. Much appreciated.
So glad this helped you!
Thank you for this. I attempted before viewing and realized I missed 2 things which you brought up and I was able to fix the issue as well. Great job!
So glad it helped!
I’d like to say Thank You! Very thorough I could ask for a better step by step. It was satisfying as you mentioned, and more satisfying that I fixed my moms vacuum. My warmest regards❤️
Look at you! So glad you could fix her vacuum! 🙌🏻👏🏻👏🏻
This helped me fix my vacuum cleaner. Thanks for the clear and detailed tutorial!
Glad it helped! Thanks for watching!
I have been trying to solve the intermittent noise issue then saw all the possible problem spots that could contribute to its cause.THANK YOU!
You’re welcome!
I was able to find the clog with your video! We almost threw out our Hoover. Thank you.
Thanks Great video in details. I fixed my hose clog ups and replaced the belt in my Hoover wind Tunnel T-series vacuum
I bet it’s running like new!
WOW!!!
That was excellent. I was about to order a new one but it’s only a year old. Turns out the hose was packed with cat hair etc. I rolled your great instructions and it works like new. THANK YOU!
Glad it helped!
Thank you. You definitely helped me find the issue. Clogged hose that I didn't check.
Excellent!
Super helpful. I didn’t even think about checking further down in the hose. I just washed the dirt cup and that top filter the bottom filter thankfully still looked nice and clean. I’ve got long hair so it wouldn’t surprise me if that’s caused a clog along with other things.
Nice work!
Thanks so much for the walk through. Without your video I wouldn't have had the curage to take the vacumne apart and find the clogs. Mulitple ones.
You are welcome! Good job!
My vacuum is less than 3 months old and wasn't sucking. There's an indicator that tells me if the filter needs to be cleaned or to check for clogs. I didn't know about the HEPA filter but it was clean and I did clean the one in the top. I ended up having to remove the hose and found the clog! Now it's running perfectly! Thank you Vac MD for this great tutorial! 😁
You're welcome! So glad our video helped!
The last part of the video helped a lot! Thanks for the help ✨🙏
Glad to hear that! You're welcome.
My vacuum just quit working and I did not even know that bottom filter was there.Thank you for the video. Hopefully it will come back on when it cools off. The hose was clogged so gonna take shields of and clean it out.😊
Glad it helped
Thanks for the info on how to troubleshoot. I have learnt a lot from you thanks.
Glad to hear it!
Thank you Kimberly I was looking for a video on how to best maintain my vacuum cleaner especially since I abuse it. This answered all the questions I had.
Thank you for watching!
8 years never knew about hepa filter thank you
Oh wow. You are very welcome!
Just what I needed to see to prevent spending money needlessly! Thank you!
Awesome!
@@kimberly.thomason I didn't have that long tool to clean the hose, so I took apart a wire hanger and that worked well and then I took the hose outside and squirted water through it 'til I could see out the other side.
I had no idea it had a filter. My pet Hoover brush has stopped spinning though the rubber hose suctions. Thanks for posting this video.
Subscribed
Thank you so much for subscribing!
Very helpful! I've almost got this thing all apart. Doing major cleaning!
Have fun!
Great video. Thanks for sharing your skill
Thank you for watching!
Awesome job! You are a very good teacher! Thank you for your helpful video
Thank you so much for watching! Getting feedback like this is heartwarming!
Excellent video - this was very helpful to fix our problem with this vacuum!
Glad it helped!
Excellent guide to fix the machine!
I agree...so satisfying when the vacuum is clean and runs like a champ LoL. Usually clean mine often with compressed air outside the house. They run sweet and last for years.
Great video on the Hoover, thanks.
Had a Bissell then a Dyson and now this new used Hoover p.a.w.s.
Subscribed😊
Right?!
I bought two new filters...still no sucking. Then I did your step by step. Belt was fine and I could drop a screw down the "easy" hose. Then came the moment of truth: I detached the bendy-hose at the bottom/end of the stream. It had a solid mass of compacted dust and dirt and cat-hair and whatever! I used the same manual Phillips-head screwdriver used to pop the hood as well as the $1.25 plastic drain clearer(I keep one in each bathroom!), so I didn't have to buy anything to clear the machine! You were right: "It's is so satisfying" somehow to clear the airstream! Voila!
This is awesome!!
There was an entire TISSUE stuck in the hose of my vacuum! It was driving me bananas trying to figure out what was the issue, but thanks to your video I was able to check everything & I think fix the problem. Now to reassemble 😅 thanks so much!!!!
Great job! So glad it was helpful.
Love your presentation style!
Thanks so much!
Very Nice explaination. Mine just conked out and now I can see what to do!
Glad it helped
This was really helpful - thanks so much!
Excellent training.
Thank you!
Thank you!! Just cleared a clogged in the hose using a broom stick handle. 😊 Works like new.
Nice work!
Great video. Exactly what I was looking for.
So glad it was helpful!
Such a great demo video! Thanks so much as it was very helpful!
Glad it was helpful!
Fixed my vacuum because of this video. Thank you 😊
Fantastic!
Great video!! Very informative and helpful!!😊
Glad it was helpful!
This worked! Clog in the hose, thank you!
Excellent!
Super helpful - now works like new!
Great to hear!
Thanks for the tips. I was able to unclog my vacuum.
🙌🏻🙌🏻 awesome
You are my new Matha Stewart. good video
I love this! Thank you so much!
It fascinates me that people are unaware of their filters and if they should be cleaned. Bagless takes more maintenance which is why a bagged system is so much better. You’re literally just throwing it away. They’re also much better at HEPA filtration. The industry really did a number on the consumer claiming “no bags to buy” well you still have to purchase filters and maintain your machine in order to keep the suction going. Bring back more bagged uprights!! 😅
Totally agree! Blows my mind too sometimes.
Perfect video for my problem, thanks!
You’re welcome! Glad it helped!
My allergies just had an allergic reaction to this video.
Ha ha! Totally understand!
Thank you so much for this video. Now I know what I need to do to get mine sucking again. Grrr
Yay! 🙌🏻
@@kimberly.thomason I found that the lower hose was clogged, packed tight. Was able with a little patience unclog said hose. Now my carpet is cleaned. Yes I checked both filters. A tad but dirty. Thank you very much for your informational video. God bless. 🙏✌
Excellent. My wife said the vacuum was spitting dirt out the back. I went through every step and found a massive amount of hair and debris in the hose after removing it and using a straightened out wire clothes hanger to pass through and pull the debris balls out. Thank you, Miss.
That’s fabulous! What did your filters look like?
I just looked up your store. Boca Raton? You must be a transplant from up north. Minnesota? Wisconsin? That accent sure doesn’t sound southern! Regards, again, for your tutorial. A+
@@bamapoppy you nailed it! I am originally from Chicago. Well done! Are you a Bama' fan?
Well, yes, I am. My Dad went to UA so he raised me a Bama fan. However, in my later years my passion has softened. And my grandson is a huge Auburn/Cincinnati fan!
And I used to live in Chicago myself when I was 5, long before you were born.
Thanks, This was helpful. Will get a new hepa filter
Glad it helped
Thank you for your informative video!
You’re welcome! Thank you for watching.
That's one thing I need to start doing : wearing gloves, I usually just get to work on a vacuum. Sometimes I wear safety glasses or a dust mask but most of the time I forget about it,
and by the way that Dyson dc07 behind you looks very clean.
Great tip!
VacMD, I made a coat hanger tool, bent 90 degrees at one end to go fishing for dust bunnies. My 2021 Wind Tunnel Rewind has a charcoal, high density foam that can be washed and dried over night. The blue filter at the intake to the wind tunnel can also be washed. Seems like Hoover TI listens and change their design. The drive belt stretches to save the motor from burning up or destroying a roller with frozen bearings (both expensive parts).
Excellent!
Thanks. I did not know there was a second filter and I've had this thing for about four years. Yikes. I was ready to buy a new one instead I'm spending $20 at amazon.
Awesome!
Very cool! Thank you for sharing.
Thanks for watching!
Wonderful video, thanks!
Glad you liked it!
Excellent video! Not a bunch of details about your personal life or what kind of coffee your drinking this morning - straight to the point and very thorough. I could not find the clog and did not want to take the hose off because it seemed clear. After watching you work I decided to remove the hose and the clog was right where you said it would be! Works beautifully again!
FYI…iced coffee with almond milk this morning.
Glad your vacuum is working again!
If u think that the Hoover has a lot of curves wait until u come across a Kenmore Direct Drive InteliClean(if u haven't already) Insanely long hose coupled with lots of bends and a nice bend where it enters the housing. Apparently these vacuums are notorious for clogs in the hose which is what I encountered. Not complaining as it only took me 2 minutes or so and now it works like a champ.
Knowledge is power!
Great video! Thank you!
You are welcome!
Great video. Helpful
Thank you!
perfect video for me, thank you
You're welcome! So glad it was helpful.
The dirt falling out of the
unplugged hose, and the filthy innards of the roller-brush area; drove me crazy! Wouldn’t it have been easier to use the suction on your machine to clean in up a bit, rather than tolerating it in your breathing space?
Thanks for the excellent tutorial!
Men, or some women are so helpless! This maintenance information is in their owners’ manual. Big dummies.
I’m sometimes guilty of needing a video instead of reading owners manual too. ☺️
Thanks so much! Learned a lot!
So glad!
Very helpful video.
So glad it helped you!
Great video! This helped a lot!
So glad it helped!
Thank you, the little hose behind the rolling brush was the point of blockage.
Glad it helped! Good job!
Great Video! Thank You 🦋
Glad you enjoyed it!
So helpful! Thank you!
Glad it was helpful!
Very helpful thank you much
Glad it was helpful!
Damn you're good! So I opened up everything, checked roller, cleaned out hose thoroughly, and still suction was... [not] sucky... so I checked the top filter, which I was so sure I'd just cleaned a couple months ago, and it was FILTHY! Time for replacements. (Your description lacks those actual links though...)
There are so many different filters for these models, it would be hard to link the correct one. I will figure something out though. Thank you for the suggestion!
Thank you u were very helpful
You're welcome!
awesome tutorial! Thx!
No problem!
Very helpful!! Thank you!!
You’re welcome!!
I recently got the hoover for my parents, i hope this doesnt give them as much problems as the shark i gave them. I had to return it and got this for them. They didnt like swivel design and im glad hoover still makes the more traditional designs. Was between this or eureka, luckly store had some hoovers so i didint need go online to order it.
Always good to support the brick and mortar stores!
14:18 you got it! Many special tools were used here👍
Right tool for the job!
I love your videos you look great aswell very rare to see a lady working on vacuums
aww thanks so much!
Eeeck! I was vacuuming around edge of a skirted chair when I hear a pop. Turns out it was sucked up a gallon water jug lid! I saw in in there Drat! I almost had it. As I got to my feet I was preoccupied thinking what I had to reach in far enough into the hose. CRAPPOLA, not paying attention I turned it on. Wowza do you have a pdf of direction so I know what needs unscrewing please?
Ever sooo impressed with your handiness and your informative video. Bravo! I thought this looks like I ciould do this. Eureka took 2 screws off & dime & water jug cap had come out at sometime w/ o me realizing it had. 2 fun knee! When I gave up going to work on it again tomorrow, I stood up only to discover they were goodly stuck where I had been sitting on them. Chuckling happily I put it back together only to discover it has no suction, what now please?