Can-Am Ryker LED Headlight Conversion Kit (Plug N' Play)
Vložit
- čas přidán 5. 11. 2019
- Ryker Headlights available at SlingMods.com here: www.slingmods.com/can-am-ryke...
Introducing our Can-Am Ryker / Ryker Rally T2 series LED headlight kit. These bulbs are an all-in-one compact design which features a Hi/Lo beam pattern similar to OEM. The latest copper substrate and high speed forced cooling system allow the unit to maximize light output without high heat retention like ribbon systems. These Ryker LED headlights feature 6000k, 60 watt, 7200 lumens xenon white color with an exclusive click angle adjustment for a precision beam pattern. This system is Canbus approved for anti flickering and aluminum body design for lightweight and maximum durability and the unique conical shape allows for 30% more focused light output vs traditional flat designs.
We've included a custom made headlight retention locking ring which comes with every Ryker LED headlight kit. This new lock ring is the only one in the industry that allows a true plug and play installation without any cutting or trimming whatsoever. All other kits on the market make you cut and dremel the OEM retainer lock ring to lock the LED headlight into place. Give your Ryker the super bight white light output and replace the yellowish halogen look with a true plug and play kit. An industry exclusive! - Auta a dopravní prostředky
Can-Am Ryker LED Headlights are available here: www.slingmods.com/can-am-ryker-headlights
I did receive the rubber led base my set was metal and did not fit
@@sJ-bb8lr Hello SJ, if you could please contact our customer service team we're happy to help you find resolution. Here's the link here: www.slingmods.com/index.php?route=information/contact
Yesterday I added these just let me tell ya. Brandon had me fooled with this 4 minute video. Trust me it definitely longer but don’t give up you will get it! One suggestion that makes it easier is to remove the headlight hosing 3 screws. There’s a lady Beth Ryker Rydes who walks you through removing the headlights because it’s a very tight space. Video editing is very deceiving get familiar with your parts and the area first. Take your time unplug plugs it’s going take little short pulls back and forth don’t force pull it out! I also noticed that you have to push the new LED bulbs in the new housing with some force. I first thought it did not fit but once you force it through it will fit. Took me a good 3 hours. Because I first tried to replace them without taking the entire housing out. I’m telling you take the complete headlight housing out you will be happy you did!! You will definitely be finish in 45 minutes at the most 1 hour. It was worth it I am happy with the product Thanks Slingmods
They work as advertised, much better than stock. Shoutout to Slingmods.
Awesome! Glad to hear it. Thank you.
Got this. Delivered yesterday and installed it. It’s a must have. Looks amazing with led lights. Love it.
You make it look so easy!
I just finished the install & i tell you it's quite a task but with a little patience it'll go in as advertised 👍👍👍
Awesome! Glad to hear you got er' done Carlo! Enjoy!
We got these and love them!
def getting these.
The installation isnt bad at all as for the left side i had to lift the wiring harnesses upwards and put the rubber gasket along with led instead of before.I also test fit everything together before hand so i could have better idea of what i was trying to accomplish as my hands are big and the working room is small. Hope this helps good luck
Works great. Had to remove the headlamps assembly to install. Found out later I installed one upside down but couldn’t get the metal ring off the led itself to switch them around. For now I guess I’m stuck with it.
Got this end today, gonna see what's up tomorrow .
They bright like sun, almost blinding .
Finally was able to install these today, but there still seems to be some bulb wiggle after the ring was installed. Still not sure why the Ryker's don't come with LED's installed from factory, even budget motorcycles like the Ninja 400 have them.
You make it look so easy!!!!! 2 hours no luck😡. Omggggggggg
Oh nooo. Some people find it easier to loosen the headlight assembly for easier access. We did not have to do that but others do prefer that method.
Struggle bus city here. We can’t get the rings to set
Just an FYI! Don't let the head light plug fall down into the interior hole. You will have to fish the damage thing out with a fish wire.
After over an 1.5 hours of trying to get my big fingers to finesse the left side, I finally completed the installation.
Brandon from Slingmods can GO POUND SAND, just kidding. It's a "Plug N Play Install" that's true, but bring a heavy dose of
patience. They do look awesome!!
Lol. Glad ya got er' done Darren!
I have a problem got the new lights but standard one is brighter then the other! What do I do??
Check to make sure that both bulbs are clocked all the way until the bulbs stops rotating. The lights project in a pattern so it if not aligned properly, one could appear brighter than the other.
Which part # are these? Looks to be a couple kits on your site
We have two different headlight options for the Ryker but the installation is the same. The T2 series has a 180 degree light output like most bikes or cars on the road. The HD Elite Bulb for the Ryker is new technology and has a 360 degree Light Output. The ones used in this installation are our T2 series bulbs. Thank you!
Is not an easy installation, specially the left side... The lights are awesome
Do these have a high and low beam?
Hello Ashley, yes they do. They have a dual filament meaning that they have a designated lo and hi beam. Thank you!
Any "pro tips" for doing the left side of the Ryker? Having issues with all the wiring harnesses.
Hey Jason, it is a tight fit man.. but it will install without removing the assembly.
@@Slingmods yep you were right! I just had to lift the wires up a little so the light could clear. I was worried about damaging the light but it went in ok! Looks great!
@@PhantomFox1 Awesome Jason!
The led bulbs I got are way bigger than these and I had to take the whole bike apart to remove the housing. You might want to update your video.
Oh yah just “snaps in”. Well my rings are in place and won’t snap in. Ended up having to use the stock one to make the leds fit
mine didnt either I might have to do the same its to much play with mine
Yep same here the rings they supplied where two thin and wouldn't snap in ended up using the stock lock rings, they look awesome though the white light
Not easy!