Complete teardown of an outboard engine.(blown head gasket)
Vložit
- čas přidán 6. 09. 2024
- Danny from k@J Marine has helped out our channel in the past with some sunk motors. Today we visit Danny at his shop in Florida City. Danny is going to diagnose a 250 df Suzuki outboard engine. Along the way Danny Explains the process and shows his work flow as he completely disassembles the engine. This is a very long video but meant to be extremely thorough so someone doing the same process can see how its done. We will try to film the rebuild after the heads are done .
My name is Alfred Montaner Host of the Chit Show in Miami
Danny from K@J is located in 955 Nw 3rd Ave
Danny Contact number is 3056007642
Florida City 33034 Unit #6
Danny seems like a legit guy. I will definitely use him if needed in the future.
Danny nailed it with the Sir No Sir comment. It's a discipline that society has lost... it's all about respect.
The impact of the driver actually helps, as long as you let it do it's thing. Steady pressure will snap more than 80% of the time.
Danny is for sure the man! You , Alfred, surround yourself with great people. Thanks to you and Danny for such informative content.
*2-strokes with carburetors RULE!*
I'm buying a boat this year and this video really helped me understand the innards of a marine engine. Thanks for uploading!
You talked about this video last night on your live podcast...
I'm saving it for future viewing...
My Dad was a mechanic by trade, diesel and gasoline engines... Never boat motors, other than regular maintenance on his own boat's.
Thanks for sharing...
Have A Wonderfully Blessed Weekend
Watching from Marion County Ga USA ✌️😎
Say Hello to Danny 😊
When my lotto ticket hits, Danny is going to be my mechanic. Period
I live on fresh water lakes and you never see this problem with our engines Man that salt really does do some damage.
Danny is such a sincere and humble man.
I bought a 2014 300hp suzuki with a blown power head for 1500 dollars I spent 3k on rebuild which I did myself but I put a new oil pump bearings and rings all new gaskets and 7 new valves new timing set. She runs like new. Guy let motor sit for 4 years and never winterized it. Was a cool project. I would love to share pics and videos
Danny is amazing! He definitely knows his Chit 👍👍. It took that long to take apart, can't imagine how long to put back together! Thank you so much for the great videos and hope you have one of the reassemble 👏👍👍
Dan is the man who knows his chit and worth his weight in gold... love his expertise.
As far as electric goes, for a car yes but for a boat no. And why would anyone need to charge a car at 2 a.m. in the morning, that's just crazy talk..
Waaaaaait for it....lol
Danny is the man
I'm forever looking at the outside of these engines, nice to get a look at the internal layout, the invoice charges interesting to see what charges per hour and rundown of replacement parts costs get an idea of running costs imagine boards with 3-5 engines great insight into boat ownership.
Danny and Boat Vibes can’t both be wrong! There both restoring the same make and model boat! I would love to find one to build! 😎🤙🏼
Nice video. I enjoyed seeing how the outboard is put together. I am a car guy so I enjoyed seeing another industry. Thanks, you did a good job with your with questions to help people understand what was going on. 👍👍
Danny is awesome. Thank you. Always willing to learn outboard skills. I will never get a Suzuki.
Hey Alfred, most of the boat owners we see can’t even dock there $25000.00 boats can you imagine them working on there engines 🤷
Danny is a good Mechanic nice to watch him work, I know he has done it before. love how organized he and his shop are.
Very cool video that shows how much work is involved. As a former small engine mechanic people have to understand what he did in a few hours will probably take someone a few days lol but also how as an independent mechanic you want to help people out but spending 20 minutes trying to do that on the phone is costing me money ..... Danny is a very fast , efficient, and knowledgeable mechanic 👍🏻
Thanks for taking the time out to film and explain step by step.I learn a lot very helpful about to help my friend with a blow head gasket thanks a lot.
It's not a rocket but its rocket science to me how they can fit so many part in such a small place and make it work like it does.
very cool video, I am not a boat mechanic but enjoyed the video. good to see a pro at work.
If an young person want a good career, being a marine engine repairman, one can't do any wrong
Good video, I'm going to show my wife so she understands why I paid out to replace my water propeller. And watching Danny I understand it when my boat guy said 6 weeks and I had it back in 3. The next time it needs replacing I will do it myself but having someone like Danny that really knows what they are doing, and can look over a motor tell you what else needs to be done. Priceless!!
Great video guys this is good viewing , Danny’s a good dude
Yo ALFRED, you need a video light for your camera if you intend to shoot instructional videos! Every time you moved the camera towards the starboard side of the motor you washed out the video because you were facing into the sun. When you showed the port side you were golden, the sun was over your shoulder lighting the motor up for you! Same for when you filmed the rear of the Suzuki, you went from bright sunlight to a dark interior and you couldn't see the work that Danny was doing too well. You know I love ya, oh mighty KING of HAULOVER and BRONCO BUSTIN GURU, but please get a video light for shoots like this!
PS, the interior shots of the motor inside the shop were 100% better!
great video , its all good until you snap a bolt of that's corroded into the aluminum. There's a real knack to getting them out without damaging the thread and it's not with an easy out as people have found out
In 45 minutes, he had that upside-down rib boat you got out of the canal running. And he doesn't get on dirty boats.
From a car guy very interesting to see a marine motor torn down 🙂
He needs a stainless steel work table to work off of. Easy to slide engines on and easy to clean up after he’s done. Great video
I love everything about Danny's shop.
Doing all this to my 2005 df225 currently this weekend. Thanks for the tutorial, it has helped me tremendously, I am about to pull the block today.
Great video absolutely enjoy watching that marine tech. Can’t wait to watch Repair put back together. Keep up the great work and videos
Danny is like Rain Man of boat engines.
Fascinating video Alfred, really interesting. This guy knows his stuff, great work👏
This is a great video "sir", I mean mon 😂
Glad you made it Alfred 🤙
Kudos to Danny for paying it forward. The guy from his teenage years showed him valuable knowledge and it's great to see him paying it forward. I like doing chit like this but would get nervous about forking something up.
Thanks for posting mon 🤙🤙
After rebuilding a 289 Studebaker motor there's no way I'd attempt this. Chit!!!
Danny is a surgeon!!!
This is good stuff my friend. Thank you for venturing out.
Danny isn’t lying about the bad aluminum in the Yamaha.
Hey Alfred, finally I subscribed and I watched the whole 3 hr. vid from start to finish. Awesome video plus awesome marine mechanic Danny is. He has the patience and demeanor of skillful master mechanics.
I truly enjoyed this outboard engine teardown.
I also agree with the couple dudes comments about the backlit issues. In photography, Lighting is Everything. Oh well, maybe next time. Wait for it...
Danny is the man, great video bro
Awesome video Alfred. Would love to see the rebuild and know the final cost.
I will never do that, but glade to see it.
Great video. It's fun to watch a Master.
Awesome video Thank you Danny, Rockin Roll Alfred
Definitely an awesome video, watched the whole thing from beginning to end, hopefully we get a video of putting it back together and watching it run 🤞
Mike the block was warped and the customer didnt want to go further on the build
@@AlfredMontaner Wow! That's crazy, Love your content man 👍keep up the great work
Awesome insider video.
Can u do vid Danny putting it back together ❤ vid really interesting
Block was warped
Everyone will want to know the cost $$$ of this job.
DANNY is the CHIT!!!!!
really love this video, hope you do more repair video's like this with Danny. tell him he's a awesome mechanic ... wish he was in Texas...lolol. maybe on a DF140.... lol ( motor I have..lol )
Love these break down videos, love seeing Danny work. Thanks for another great video!
And thanks for not cutting it short I love the ling format videos!
Very interesting...
Thank you..
Having been an airplane mech, I was wondering why his tool and loose piece cart was ot cloze to the work??
boat people need him in michigan because the tecks here are highway robbers,
Awesome video guys!
A view from the UK. Oh! Alfy, Alfy, do get yourself a floodlight for video you take which is backlit. Zooming into the engine was looking down a black hole. Didn't you edit this vid? Even after this "mishap" though i'm still a fan of this side of the boating world. Keep 'em coming.
Great video Alfred please get lights to show up the work. Would like to see the rebuild.
Just a question. Danny is the best!!!!!
excellent video.
I wish there was a Danny in Atlantic City New Jersey
Danny is one cool cat and an awesome mechanic!! Thanks, Mr. Wait For It! for putting this quality content together and blessing us with it! BTW, what was that guy in the background running the sander on?...lol
Wireless microphone on Danny please.
Cannot understand many important things he said.
Fantastic video. Thank you.
Gold stars!!
More videos like this please!
Loved this vid. Lots of good info.
Wow
I remember when that Dude came and mounted the Verado at Dannys shop. That was good too. So Danny worked on the Verado. OK
This guy Danny is a machine!!
Wonder what Danny thinks is the best outboards at each size/application??
awsome video thank you
Those thermostats only had a little corrosion. Pretty simple items you can test in boiling water and if they open they are still good. Let them cool and they will close. I would check the thermostats before buying any outboards used as it will tell you how much corrosion and crust is in the motor and indicator of how it was flushed. I learned to flush with Lime-away or barnacle buster as well!
I'm not Alfred but, I did the same thing after the 1st year of Business, it was more a troubleshooting the engine problem.
Great video
hey dude great videos keep em coming, hey do you know of Paige and Kevin videos, found them on one of your live chit shows would be so cool if you guys hook up while they are down there. they are kind of your fresh water side later king of the ramps
Very good video just work on your lighting for the video 👍👍👍
Excellent video guys. Jeez it's mind boggling to see how much there is to take apart. My respect to those that need to re-assemble. What make of outboard would you advise buying?
great vid. I decided to buy a new motor.
Thanks!
Thanks Danny for letting us tag along. You hiring?
Why doesn’t Danny have his tool box or multiple tools closer to the motor he his working on???
sorry Danny, Electric is coming and I don’t think you are old enough to make the cut. The good news is you will learn. You have the skills, brother.
Alfred ask how much does Danny charge for a job like this . I heard he said 12-13hrs. Of work. It's that the entire job + parts or removal only? What would something like this cost if takes the block sends to machine shops and install new piston, sleeves, rings, rods and bearings, whatever it needs for that block. Mechine shop heads with new vals, seats, etc... ( a premium head package)? Turn key operarion for that Suzuki motor. Also how much down time to be drop in the water.?
Love the video!
When using “anti-seize” grease on all fasteners during reassembly, will that change torque specifications?
I'm not Alfred but, When I did you anti-seizure grease on most of my engines, I kept the same torque specs. Have a nice Day.
67 man I live in Canada I don't even keep my house that warm in the winter thermostat set at 65.
Muy bueno el video de mecánica espero que a gas el video de armado del motor estos videos son muy ilustrativos mejore que la uevada del cocodrilito te sigo en todos los videos desde argentina nauticaraul espero mas videos de estos. ( párrafo aparte que ruido es el viene de fondo en el video? ) Un abrazo a la distancia.
Mercury Marine machined in USA they have a how its made video on Mercury Marine all Mazak Machine centers with top notch castings.
Mazak all day. Only the best for the best
I wonder what Danny thinks about Tohatsu/Honda outboard engines. I know Tohatsu makes many smaller engines for other companies. Alfred please ask him. Thanks.
Also, the small Mercury engines for many years were made by Tohatsu. Is there a difference between the HP/size and reliability per engine brand.
Any video of it going back together?
Do you have link for gasket kit also do you have installation video.
Great video, love to watch Danny at work!! Please figure out a better way to pick up his voice for your video, very hard to hear much of his talking.
DO YOU HAVE A VIDEO OF HIM PUTTING IT BACK TOGETHER?????????????
Alright!
So honestly then is which make model 250 to 300 hp outboard I should consider used and which year is the best?
Danny find someone north with a waist oil burner and see if you cant sell it cheep and make a profit where you use to have an expense.
Do Danny works on inboard mercruiser 7.4 V8 engine.
Cracking content just let down by the lighting, buy a decent lamp for the rebuild .....Please.
Hi Alfred, will you be making a video of the rebuild, or at least the startup after rebuild?
Harry after Danny inspected the block it was warped and customer didnt want to buy a new one. That was the ultimate goal though