I Turned Steel Cable into Damascus Knife
Vložit
- čas přidán 21. 03. 2024
- Want to buy a Knife? Visit my shop with the link below!
bladeluxeknives.com/
This project was aimed toward a twisted Damascus pattern with cable in the middle. All in all, it did not come out how I'd like it, plus the cutting edge does not have up to standard steel, so I would consider this blade a fail.
Feel free to leave a comment or anything you see I can improve on,
If you enjoyed please like and sub and take a look at my channel! - Jak na to + styl
I can’t believe I watched this whole thing just for him to say at the end that he didn’t finish because it sucked
Thank you CZcams reccomended
I was not aware I liked blacksmithing videos but now I am
Heartbreaking. But, quality come with sacrifice and dedication. Great video.
I think it looks good. Keep it going.
You deserve more Views and Abos
this is amazing
Looks good! Not a fail, but a learning curve. What you did learn will make the next one better. Recycle it. Fix it, put an edge on it, send it to me, and look like it could be a good boot knife or edc low profile carry. Put it on a belt buckle.
Not a fail.
Cool video. Good luck on the next one.
Totally, Definitely worth making it to learn from
I've known for a while what flux is and why it's used...but this is the first time anyone's mentioned what it is chemically. Thanks.
Не ошибается тот,кто ничего не делает! Успехов в постижении истины!
I love watching your videos
your work is extraordinary
Thank you
Im actually liking the patten very much. Its very unique and I feel like it turned out better than you feel. I know artists like what they deem perfection in their work but never forget perfect is the enemy of good. Someone, like me, likes it even if you dont. Good work, stay after it.
Idont think it was a waste of my time. I still enjoyed the process and still looks beautiful to me ❤
Yes, beautiful
Badass as always. Before hydraulic presses, it must have taken months if not years, to make something like this. Stay safe bro.🙏🇺🇸🙏🇺🇸
hand hammers are actually a lot faster than most people realize. a good blacksmith in those days could probably forge this in a few weeks
@Wildkirblet thanks for responding. That's very interesting. You have an incredible skill bro.🙏🇺🇲
It usually took a few days for the forging. Treadle hammers have been around for a long time but before that they used apprentices and even their wives as strikers. What took time was the grinding and the making of the hilts. Scabbards took time as well. Different craftsmen did that work, though.
Too bad you couldn’t finish it, but it still looks really cool! Maybe it could be decorative?
definitely
*works quietly for hours*
“damn my knife sucks”
Best butter knife on the planet.
I bought some 1.5” plow steel wire rope last year. I’m looking forward to trying it. Plow steel is supposed to be 1095 from what I’ve read.
Wire is the hardest Sh*t EVER to get solid welds. Id rec MIG'ing literally everything to keep it together as best as ya can. The strands separate under heat a whole lot. I've never had any success without a press and corner squaring dyes to make it stay together. Its rough dude! but gooooooooodluck to ya brother.
Menggunakan metode pelintir. Proses yang bagus
"this blade turned out terrible"
"Like and subscribe for more builds like this"
😂😂
Trying to work it when it is too cold a lot of the time.😊
You could go on Forged in Fire and still win with this “fail” honestly I think you’d kill the competition
lol no
@@bloodgout you must be a great friend to have for encouragement…
Better than being lied too
@@bloodgoutwhy tf?
Every great inventor will tell you. I dont know the best way to make something but i can tell you every other way not to. Keep trying and one day, you will have the same experience, if not better than others.
اتمنى عدم تجاهل ردي واجد إجابة.. السؤال ماهو المسحوق الأبيض الذي يضعه الحداد على القطعة المعدنية الساخنة
I'm wondering the same thing.
Es Borax,se usa como fundente,ayuda para un mejor caldeado
They make these already completed. It will save you time and money on having to buy equipment to make one.
When it cools it looks like a barbecued rib
Yummy
5:18 lamba 😂rey madam 😂 Lamba 😂teri jan😂kasamle😂lamba😂
5:18 Teri ongya 😂 reel😂lamba 😂
experience is an accumulation of errors.
1624 “bang, bang”
2024 “breh, breh”
I like the look of it. Woodgrain , elvish blade
Flux protects the welding surfaces from out atmosphere
How many layers did you add?
Wtf was that ending you can’t just do that to us man!
Hi dear friend
What is the withe material u use?
I think it isn't sult
Hi I just sub one question wat is that powder that everyone put on the iron when it's warm
Borax.
@BladeLuxeTV what press do you use?
Like Make/Model???
I made my own, the hydraulic ones are like a few grand. mines just a 20 ton pneumatic car jack with framing around it.
What’s the white stuff is sprinkling on there
Borax.
What powder is that?
nice
nice
Why disappointed? I think it's beautiful work.
Quelle est cette poudre blanche / grise ?
Its to bad the weld didn't go as planned but still very cool looking. Make another one. If it comes out like this but actually welded don't polish it. Very unique look to that knife.
Thank you…. Didn’t come out as I thought it would but I’ll definitely do it again and change up the steps
Was it because you twisted then you layered again.. and lost the pattern?
It almost looks like your press is too slow. You're losing a lot of heat before you move a lot of material. The damascus is pretty, nonetheless. Keep it up!
The white stuff is bauxite, to help melt the steel. I could be wrong.
It’s borax flux. It prevents oxidation
Your finishing work would've been a TON easier if you'd waited to quench it till you'd had it fully ground down
Maybe it came out wrong because of all the cocaine you sprinkled on it 💁♂️😂
Pense que el cuchillo iva a ser mucho mas grande
What is the powder?
Flux
OK, great. What can you harden it to? How long will it hold an edge? Is it brittle, or have a tendency to edge chip? How easy or difficult is it to resharpen?
Has a red box piece of metal ever flipped back and hit you?
No I don’t think so but I get burned all the time
Tremendo 😎 👌🏻
Cute
is it salt ?
It's flux. Many smiths will just use borax (found in the laundry detergent aisle of most grocery stores). There's a variety of things you can use like that.
Forge welds were too cold, blade probably wasn’t very strong
Do katana next
I’d like to make one soon!
@@BladeLuxeTV cant wait
Fantastic Blacksmithing...................However that is absolutely not in anyway shape or form Damascus, it's forge welded.
Hello there Captain Pedant. How's your day going? Corrected any other colloquialisms today?
Tôi và bạn có phải là anh em không vậy ? tặng 1 cây đi bạn ơi 😂
halo
@10:13 - @10:18
@10:27 - @10:41
Bro, what is your hand made up of? 😨
Could you send me one of these?!?!
Why would he give you something for free after he did all that work? Offer some money.
@@bloodgoutwhy sit here and hate when you could be spending ur time doing something better
Alot of material was used and wasted. Good try though. Forge welding is an art. Not everyone can do it. Especially me. I know I would mess it up.
White stuff is salt, I think..it melts at the right temp to forge or whatever.. saw it on FORGE IN FIRE
The white stuff is borax
And it’s used to prevent oxidation
就這樣?
Nice work but that’s a no from me dawg
I still thought the pattern was cool. If ot was a better material id have loved to buy it.
It looks alright, I just thought the pattern would be different, but just experimenting I guess
Why post the video?
Why u watch it ?
Finnish your knife. Many more mistakes to be made on fittings and handle. Keep it and review it. To remind you how far you have come.
So you didn’t finish it, and wasted 11 minutes of our time? Thanks for that.
It seems like there are too many processes that are useless, and I don't think the results are perfect
Let’s see your process and see how it turns out
Are people not allowed to just create things for fun? It doesn't have to be perfect.
Where is your Chanel so we can see your knives and the process you use
Which of these processes would you consider useless
Awesome knife
Its not damascus => its forge welded. true Damascus is a crucible steel ( with trace amounts of vanadium in it)
Do you want a gold medal for pedantry?
@@bateman2112 NO I want people to understand what real Damascus is. Do you want to show people what an arrogant plonker you are!
👎
Then why bother posting? You just wasted our time watching.
Che cosa sarà quella roba bianca che ci mette su come fosse parmigiano e chissà a cosa servirà, qualcuno può aiutarmi?
Should have twisted it.