This will be interesting to see. The trackhawk ride height allows for the front dif and axels to travel under the oil pan. While on all the awd chargers and 300’s the dif is attached to the oil pan and the driver side axel travels through the oil pan (Chrysler engineering 🙃). Also the the front driveshafts are on opposite sides which will be an issue for the transfer case. Charger and the 300 has the front driveshaft on the passenger side. These all are reasons why I think Junkyard Dave took the route he did and built a custom tube subframe. However I really hope you pull this off without going the tube subframe route.
You ever see the custom junkyard dave I think it was did? Custom srt magnum charger awd I think thing? Personally I respect the hell outta both yall for being true to what yall want, and building awesome vehicles. Mad respect from 757VA
i have a AWD 300S and i always wanted someone to try this. I know it will be a big job but it will be well worth it. 1000lbs light too compared to the jeep so this will be a rocket!
The engine in the 300 more than likely is Hydro locked pull the spark plugs out and check most of the time. Once you get the water out change the oil engine is fine.
NO ONE, n i mean NO ONE build 300’s better than khal. there’s plenty of clean builds but none has that same quality that your have and that same 1 of 1 factor. can’t wait to see how this comes out.
I wanted to do this with my rt awd magnum but I didn’t know much about cars then AND the awd system was trash. I know u be doing the shits so imma take notes and hopefully be able to do it myself someday
The engine is hydro locked with water in the combustion chamber, typically with flood vehicles you pull the spark plugs and fill the cylinders with wd40 or something to displace the water then work the crank back and forth then turn it over with the plugs out otherwise you’ll bend a rod
Not really. He's changing out all the electrical components including the wire harness. The 300 will be just a piece of frame before he actually starts putting stuff on it, so he's basically starting from scratch.
How's that build going? I guess great minds think alike I'm doing the same thing a 2017 chrysler to a 2018 trackhawk have u had any issues? I'd appreciate any obstacles u have encountered and what you did to mitigate it? Thanks
I am looking for a nice scat or even a r/t 2015 or up tho little damage is fine I found a few if I get a r/t I am gonna swap it later on I think it be cheaper to get the r/t body and then swap it it’s still got the dash kit and everything the hellcat does inside so seems like the better option
Its all luv my dawgg take yo time no rush make sho its right & have the blue print for this build down to the T like the rest of the builds you do because you know people gone want something this done but salute though 🫡🫡🫡🫡💯💯💯💯
I need a pigtail for the ACTIVE SHOCK STRUT DAMPING PRESSURE SENSOR Mine got ruined taking the the motor out. If you have one lmk where to reach you at so I can purchase it from you.
That’s crazy it doesn’t turn on 🤦🏻♂️I got the same 300 mines was under the same amount of water n I started it up I got video …but definitely can’t wait too see urs done 💪🏽🫡🤘🏽💯🐐
My boy back at it he changed the game with the hellcat 300 now everybody doing that then the hellaphant 300 now a awd 300 trackhawk he doing what Dodge/Chrysler scared to do let's get it
Let me cook..
Go ahead bro
Fr
I wish you could build a 2020 Impala into a SS 🤔, maybe a Camero swap Lt4🤷. But I love the channel bro and this build is going to be crazy 🤙
Do your Thang bro 💪 your a Beast
Cooked
This will be interesting to see. The trackhawk ride height allows for the front dif and axels to travel under the oil pan. While on all the awd chargers and 300’s the dif is attached to the oil pan and the driver side axel travels through the oil pan (Chrysler engineering 🙃). Also the the front driveshafts are on opposite sides which will be an issue for the transfer case. Charger and the 300 has the front driveshaft on the passenger side. These all are reasons why I think Junkyard Dave took the route he did and built a custom tube subframe. However I really hope you pull this off without going the tube subframe route.
As a chevy guy i appreciate your knowledge on these Mopars
Just use the 300s oil pan with hello kitty's blown power plant 😊
@@Fossillarsonthat's not possible. The 3.6 oil pan will not fit the hellcat engine.
Idk thanks :)
You ever see the custom junkyard dave I think it was did? Custom srt magnum charger awd I think thing? Personally I respect the hell outta both yall for being true to what yall want, and building awesome vehicles. Mad respect from 757VA
Bro this build is gonna be sick can’t wait to see the progress…… you are a Mopar God !!!!!!!
Just when they thought they caught up my boy dropping another hit real 1 of 1 shit, keep up the bro💪🏽🤘🏽 #MichiganInTheBuilding
who else doing what bro do ? serious question cause I like watching these videos
Looking forward to how this turns out! I prefer the 300 styling, love the idea of a newer awd Hemi version!
Can't Wait For This Amazing Build!!!
Interested to see the results with the placement of the axles in a charger awd vs jeep locations and how the subframe works out
Ngl i was looking forward to the new grand cherokee trackhawk build but this one finna be crazy 💪 🔥
It’s a bummer to see a track hawk go away, but this is going to be one bad ass build!
i have a AWD 300S and i always wanted someone to try this. I know it will be a big job but it will be well worth it. 1000lbs light too compared to the jeep so this will be a rocket!
Bring that trackhawk back to life after the 300 thatll be 🔥
Man it's so relaxing watching your videos, I hope when you get elevated you'll still keep your videos 💯
I'm looking forward to this build.
Man I can't wait for the next video. I really want to see you make it work. Can you do this swap on a Magnum ?
Thank you for doing this! I would love my HC to be AWD
It took you long enough Bro! Evil genius back in the lab! Cant wait for this one!
Nah I see the vision that Jawn gone be hard 🥶🥶🥶
This and the trackhawk magnum going to be tuff when they drop
This gonna be sick right here ! 💯💯💯
That car going to be hard you always dropping some fire 🔥 💯
This dude stays breaking the mold. Dodge be on here tryna collect ideas at this point haha
This gonna be a very interesting build. All for it 💪🏾💪🏾
Bro I swear this man does everything I can think of to be different
Omg anotha 1 of 1 hell to the Yea my Brotha 🎉🎉🎉
I can’t wait for the finished product my bro one day I need to have a 300 hellcat
I did the AWD swap on the 300, it’s actually easier than you think.
If you have any questions let me know I can help.
Fr?!
Thank you cuz I been asking for this one I need this done to my 300
Can’t wait to see your new build 🔥
Can’t wait to see your build on this one fam 🔥🔥🔥🔥
Any issues with the carbon fiber door inserts? I need one for my drivers side. I have a 2018
This how you know Khal the king‼️
The engine in the 300 more than likely is Hydro locked pull the spark plugs out and check most of the time. Once you get the water out change the oil engine is fine.
I wonder if it’ll be possible to make this swap work in a last gen body charger, lotta retired cars out there
I'd think it would be there's a awd charger magnum 1off junkyard Dave I think did. Things now not much isn't doable either the time and talent needed
It would damn sure be awesome as hell! I'd buy 1 fast AF
I have a 2012 dodge charger sxt with paddle shifters, what u think about these cars
Always wanted to see a Trackhawk AWD Hellcat/Demon in sedan form 🔥💯
NO ONE, n i mean NO ONE build 300’s better than khal. there’s plenty of clean builds but none has that same quality that your have and that same 1 of 1 factor. can’t wait to see how this comes out.
Facts bro
This will be an interesting built...If it could be done I know you will do...Can't wait to see
Isn’t the trackhawk awd? And if you get a 300 awd would it work?
Hw much for a charger swap either scatpack or hellcat I have a v6 that runs an drive,tryna get it swap,I been watching for a while,nw I’m interested💯
The talent of these guys is unreal.
Birdman hand rub*😂👏👏👏
Do you have a trackhawk rear fascia/diffuser for sale (black trim piece that’s attached to the bumper)? Trying to put the dual tips on my WK2 SRT.
You can’t do it. This is legendary shit here. This build will make you an SRT God‼️💯
I wanted to do this with my rt awd magnum but I didn’t know much about cars then AND the awd system was trash. I know u be doing the shits so imma take notes and hopefully be able to do it myself someday
Holy shit hope all goes well bro one badass project💯
I thought about this not that long ago damn love to see it come to life 🙌🏼 ima have it one day as well
The engine is hydro locked with water in the combustion chamber, typically with flood vehicles you pull the spark plugs and fill the cylinders with wd40 or something to displace the water then work the crank back and forth then turn it over with the plugs out otherwise you’ll bend a rod
Flood car will be an electrical nightmare till the end of time, good luck!!! Will be a wicked build if it works ;)
Not really. He's changing out all the electrical components including the wire harness. The 300 will be just a piece of frame before he actually starts putting stuff on it, so he's basically starting from scratch.
Finally! AWD 300. This thing should get into the 9's.
This build gon be crazy
How's that build going? I guess great minds think alike I'm doing the same thing a 2017 chrysler to a 2018 trackhawk have u had any issues? I'd appreciate any obstacles u have encountered and what you did to mitigate it? Thanks
Never mind didn't see the other videos I subscribed I love ur content it looks crazy complicated
Much love and support from Boston 🙏🏻 ❤
This build is going to be 🔥
Frankenstein 300 build 🔥🔥
Pure bangers khal keep up the great work. 👍
You should try that with a 300m or a dodge intrepid. That would be badass
Going to be sick. I’m excited for this one
At first I was looking foward for the new grand Cherokee but this is gonna be crazyyyy
There’s a neon green 300 in St. Louis that has a track hawk engine swap heard about three years ago seen it a couple times
I was wondering can you swap the dashes between the two
If you build it they will come!! The Build we needed #letsGo
Goat stuff right here
Bro what?!?! A AWD Hellcat!!! This about to be crazy
good luck bro i can’t wait to see it
Bro your a goat that shits bouta be insane
I am looking for a nice scat or even a r/t 2015 or up tho little damage is fine I found a few if I get a r/t I am gonna swap it later on I think it be cheaper to get the r/t body and then swap it it’s still got the dash kit and everything the hellcat does inside so seems like the better option
YEAH HE FINNA BREAK THE INTERNET WIT THIS ONE WHEN HE DONE WATCH BRO ALL THE RAPPERS GONE WANT TO BUY THIS ONE💯
Lil Baby gonna want this after you build it 🔥
Love your vids, should try a GM swap maybe like an ls malibu
Can’t wait to see the finish product you’ve made me a fan of dodge now
I wanna do this with a 2015 rt charger so you could get awd with the 5.7
I can’t wait for this build
Whoever wrecked the Trackhawk should never drive again.
I say this about anybody that wrecks any supercharged car
oh yeah this shit finna be hard !!! i ain’t forget bout that 2023 “trackhawk” update us
The 300 awd tcase wont work for the swap?
Love ❤️ your Cadillac Escalade-V just love it oone day i will own one!
Its all luv my dawgg take yo time no rush make sho its right & have the blue print for this build down to the T like the rest of the builds you do because you know people gone want something this done but salute though 🫡🫡🫡🫡💯💯💯💯
Yea this going to be the one ☝🏾
That’s gone be sooo tufff bro
This gonna be sick 🔥🔥
You should have 1mil subscribers champ as no one is doing stuff like this. Keep grinding 😤😤😤😤
BEST Channel of its kind! Hands down! 👑🔥
Definitely going to be following this, you got another subscriber my boi 💪
Great ideas I can’t wait to see it come alive
You can’t use the center console from the jeep in the 300?
I found a Trackhawk drivetrain at iaa and was wondering how hard would it be fit in under a 14 grand Cherokee srt?
It’ll fit they are the same body style and a few years apart
I need a pigtail for the ACTIVE SHOCK STRUT DAMPING PRESSURE SENSOR Mine got ruined taking the the motor out. If you have one lmk where to reach you at so I can purchase it from you.
how much did u purchase the ye track for?
Hey khal i got a 392 off a 2012 srt the what do i need to swap into a 2016 charger?
would it just be straight swap or do i need any other parts??
This project gonna be a beast 💪 #moparking
That’s crazy it doesn’t turn on 🤦🏻♂️I got the same 300 mines was under the same amount of water n I started it up I got video …but definitely can’t wait too see urs done 💪🏽🫡🤘🏽💯🐐
Oh yeaaa make that a strictly Track Car … Boom A New Income 🤝🏾
What happened to the 23 (new body) track hawk??
How many miles on the motor ?
Srt goat 🔥
My boy back at it he changed the game with the hellcat 300 now everybody doing that then the hellaphant 300 now a awd 300 trackhawk he doing what Dodge/Chrysler scared to do let's get it
build gone be 🔥
Lfggg been waiting on this 🔥💪🏾
I have a dodge magnum in Pittsburgh I really wish you could work on it nd upgrade it