Dodge Ram instrument cluster removal procedure 2006 and similar

Cluster Fix demonstrates the removal of an instrument cluster from a 2006 Dodge Ram As an added precaution it is recommended that you disconnect the negative battery terminal before unplugging and plugging in the instrument cluster.
If you are experiencing erratic tachometer, simultaneous loss of left or right side gauges or inoperative odometer on a 2006 model year and would like to send your cluster in for repairs you can copy and paste the LINK BELOW or visit website if you have another model year.
clusterfix.net/store/product/...
Email or call us with your questions and place orders through our website at CLUSTERFIX.COM since questions are generally not answered through CZcams comments.

[@erwinbenally8027]

Thank you for the information

[@frank-bp5ce]

Thank you.

[@94sn95gt]

Dont know if you even read the comments on your videos, but I have a 2006 4.7l durango. The odometer and the trip counter will count up the miles as I drive but as soon as I shut the key of and restart it, the odometer and trip counters are back to original miles before I drove it. For instance Say I have 100 miles on the odometer, I drive 10 miles, it counts up to 110 but when the key is cycled off it reverts back to 100. So its counting miles but not storing them. Any insight on what this is, can I just swap in a new cluster?

[@PhilipCurrier1]

how many bulbs are there in total including only dash, behind radio, ac control buttons, the window buttons on each door

[@likeke323]

How much to fix the cluster?

[@billtrucker5689]

So my 2008 Ram 1500 started before I removed the cluster. After replacing a few lights in the cluster, now my truck wont turn over.
All wires are plugged in, firm connections.
Any ideas?

[@chasecrowder04]

I replaced my overhead console in my 2007 dodge mega cab and my truck would crank and dash lights was all on. It would start Becouse that overhead console was bad or had a short in it. It could be a wire or anything.

[@michaelsutherland3981]

Hi anyone can help me do you need to disconnect the battery terminal before removing instrument cluster

[@ReddBoiNumba1]

What about an 02 ram? None of My gauges work nor turn signals or power locks

[@tylerpowell3616]

Will a new cluster need to be programmed to work.?

[@ClusterFixWashington]

Not with a repair service, it will be plug and play

[@dominicperotti4195]

My odometer doesn't light up at all 2003 ram 2500 5.9

[@billyjenkins3015]

I had the same thing happen and it was a bad board. Let me know if you need the guys info that fixed it for me.

[@ClusterFixWashington]

That is the main problem that we repair on the 2003 model

[@juanpabloalvarez5650]

Nhi bi

[@BOSS_805]

Yay looks like fun! NOT