Snowmobile Cylinder Reconditioning at Home With Professional Results! Vintage Polaris snowmobile!
Vložit
- čas přidán 16. 01. 2024
- I take a cylinder with all kinds of problems and bring it back into shape and ready to use! Dissolving aluminum stuck to the bore, measuring, setting piston side clearance and fixing a taper. It's all here and you could do it too - with some measuring tools and good quality hone.
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: / nuttersspeedshop
or
Send beer and pizza funds through Pay Pal to nuttersspeedshop@gmail.com. No questions about sleds will be answered by e-mail. Leave a comment. Comments help the channel, e-mails don't.
or
Want to send Farley dog treats or send something to Nutter's Speed Shop?
P.O. Box 241
Stacy Mn 55079
Shirts and stickers are here: nutters-speed-shop.myspreadsh...
Brass fuel tank pickup with screen for 1/4" fuel line. amzn.to/46d5k91
Battery I used for project Walnuts amzn.to/3rvxb5r
My favorite (almost) universal tether. Works on all vintage Polaris amzn.to/3LLn3gm
99502H 2RS bearings - oddball smaller bearings used in some Polaris skids. amzn.to/3D9yLfO
Rivnut tool we use in the shop: amzn.to/3H98pNp
The O-rings for Polaris TX carbs amzn.to/3wc25hG
Shoe Goo -- Fix your sled seat! amzn.to/3XAJfgc
Shake and Break! The Ultimate Philips impact driver! amzn.to/3CcJgyk
62052RS bearing I have been using. Cheap, but seem OK for my use: amzn.to/3h2ZimS
Wix 33001 1/4" Fuel Filter for sleds: amzn.to/3zs1x9A
Brass 3/4" hose barbs: amzn.to/3Fvrjh4
Spring Compressor - right size for sleds: amzn.to/3MU5Jo1
Really deep 12mm socket for above compressor: amzn.to/3uIDyjE
9/16 6 point socket, 1/4" drive: amzn.to/3EYDQcF
Mayhew Dominator Pry Bar set: QUALITY!!! amzn.to/3yvg0B6
Genuine Hella H4 headlight for wedge Indys: amzn.to/3LjQOmq
Insulation for belly pan near pipes: amzn.to/3DqyOEU
7PSI lever lock radiator cap for Vintage Polaris (large cap) amzn.to/3BhUjVN
1/4-20 flat nuts for vintage Polaris: amzn.to/3qGa18e
9mm hose clamp for fuel lines: amzn.to/3xBS51Q
Three Bond 12-11: amzn.to/3JVU4CM
Ultrasonic cleaning solution that I use: amzn.to/3scP7PX
Heavy Duty Voltage Regulator: amzn.to/3sY1m1W
LED light that fits TX and TXL: amzn.to/3Hcb2vEtage - Auta a dopravní prostředky
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: www.patreon.com/nuttersspeedshop
Nutter I think you meant. " The Solution is Dilution" Could be new T-shirt along with "The Junkyard Provides" and "Good Enough for Who its For". Nice content, thanks!
Man that cylinder cleaned up nice. Excellent video John!
Thanks Lloyd. See you at ERX?
Good video Nutter! I like my Sunnen hones.
I'm sold on the Sunnen hones now. It was amazing how it fixed the taper.
Looks great John.
Thanks 👍
Great video Nutter! I like this kinda stuff, always something to learn 👍 Good tip on the Sunnen hone
Cheers 🍻
Glad you enjoyed it
where the hell is the snow Nutter? This year sucks!!; FJB
FJB
With this lack of snow I can only imagine this is how a drug addict feels without drugs , I wanna ride!!
I like this show it reminds me of the shade tree mechanic back in the 90's
Thanks!
I’m guessing ur full time job is machining. I went to wahpeton nd for machine tooling. U know a lot of the trade words.
Show and tell and tips make great videos...Nice
Glad you like them!
John I use atf after honing a cylinder you be surprised how clean they turn out with the ATF and a clean rag
Never heard that, but I'll try it with white paper towels and see if it pulls out the same amount of crud from the cross hatch.
Wow ! great video !! I am going to do my jug's on my triple !! trying to deglaze them. is there a better way to do that or what to use ! { oil or something els ! } I have 240 grt stones !Oh we got some snow at -20 LOL !! Greater Napanee Ont.
A ball hone is just fine if you only need to deglaze. Straight stones are also good for cast iron, but I would never use the straight stones on nicasil or chrome cylinders, 240 sounds about right. Should be fine.
Very informative. I restore old 70's sleds for a hobby. Your shop looks alot like mine. Keep up the good videos.
Thanks 👍
I think that Lisle is a 16000? I have a Lisle 15000 that I have successfully used to hone a 290ss cylinder 76mm bore (errr...maybe one or two over that). I have no doubt that the Sunnen is better (and this video makes me want to buy one), but at least it's low buck and big enough for the bigger cylinders for anybody out there that wants to give it a go. Also Harbor freight sells a heavy duty low rpm drill 0-600 rpm which is pretty beastly and about half the rpm of typical corded drills. They call it a "spade handle drill/mixer". It's hard to control most typical corded drills slow enough and a nice cordless drill with a "low gear" is great but this sucks down the battery in a hurry and it will be HOT. Obviously the mill is better, maybe a drill press (haven't tried).
It's a 16000. never had a 15000. Is it bigger/better?
@@nuttersspeedshop I can confirm that it's bigger. I have very limited experience with it or hones in general so can't say much about "better".
But Nutter I don't have a milling machine so you're still getting my cylinders if I need them honed. Carry on.
A hand held drill works if it goes slow enough. LOL.
@@nuttersspeedshop Funny you should say that. I just watched Todd do just that.
Yep Todd did, just maybe a little too fast. I was always taught 1/2 the speed, twice the feed!
Acid …. Boy that brings back memories 😅 I’m working on a 600 ves project. Do you think I could use a xcr single stock triple exhaust system on it ? I’m having trouble fitting stock pipe under the hood
I really don't know.
ur gonna need a scrolling screen soon for the Patreon list !!!!
It's getting there.
Where are you from. What country. England
USA
Is this a cast cylinder? Or plated?
✌️🍩
This was cast iron. For plated use a ball hone. Consult the ball hone manufacturer for the size and grit you need.