Brother...Thank You! I was seeing dollar bills flying out of my pocket. I used your video that helped me realize I could stick a big screwdriver in the cap and free up the gears. Massey Ferguson 240. Thanks again!
Thanks bud I'm doing one now on a 1428v now I know where to go. Thanks, the bad part is I have a 210 myself so I'll probably have to do mine in the future even though I use mine every day to move engines and trailers.
Tractor forums say that you should shift gears without pulling up on the shifter to avoid this issue on an older tractor. Pulling up lets the shifter slip out of the groove and jams the shift mechanism.
My mf 375 got stuck in reverse gear yesterday. The left gear shifter would hardly move, and was in an upright position like it was in neutral, so something was blocking it from moving as it should. Saw your video and decided to give it a go myself. Found the gear lever spring broken. The widest (upper) part of the spring had slipped below the locking circlip at the end of the lever and jammed both linkages to 1st and reverse (#2 from the left) and 2nd and 3rd (#1 left). The narrow part of the spring was still in place above the circlip. Changed the spring and put some grease on the ball on the lever arm with the locking pin. Then put all linkages in neutral and aligned the lever arms carefully to slip correctly into the slots as I moved the plate with the lever arms back in place. Tractor up and running again, shifting fine through all gears. The gear lever spring is hard to compress while the fitting the circlip if you do this alone. Lock the lever arm in a bench wise or have a friend to hold the lever arm while the spring is compressed. I think the spring is the same through all series from 135, 200s, 300s and up to the 5000s. Thanks!
Hi Jay! Did you get it up and running? We just got our Massey Ferguson 240 stuck also. None of the gears are locking into place, the stick gear moves very easily. Yes this video is helpful. Thank you!
1st thing I would do is take the top trans cover off & see if the shifter spring is broken if it is most like the trans is in 2 gears at once & youll have to manually unstuck the gears with a long pry bar
Yes, this was helpful to see how the gears work with the top off. I'm trying to fix mine on MF231
Brother...Thank You! I was seeing dollar bills flying out of my pocket. I used your video that helped me realize I could stick a big screwdriver in the cap and free up the gears. Massey Ferguson 240. Thanks again!
I’m glad the video helped brother, good luck to you
Thanks bud I'm doing one now on a 1428v now I know where to go. Thanks, the bad part is I have a 210 myself so I'll probably have to do mine in the future even though I use mine every day to move engines and trailers.
Tractor forums say that you should shift gears without pulling up on the shifter to avoid this issue on an older tractor. Pulling up lets the shifter slip out of the groove and jams the shift mechanism.
You're awesome, and your attitude is great for figuring it out... Come take your time with mine and fix it... 🧐😊🇺🇸🇺🇸🇺🇸
My mf 375 got stuck in reverse gear yesterday. The left gear shifter would hardly move, and was in an upright position like it was in neutral, so something was blocking it from moving as it should. Saw your video and decided to give it a go myself. Found the gear lever spring broken. The widest (upper) part of the spring had slipped below the locking circlip at the end of the lever and jammed both linkages to 1st and reverse (#2 from the left) and 2nd and 3rd (#1 left). The narrow part of the spring was still in place above the circlip. Changed the spring and put some grease on the ball on the lever arm with the locking pin. Then put all linkages in neutral and aligned the lever arms carefully to slip correctly into the slots as I moved the plate with the lever arms back in place. Tractor up and running again, shifting fine through all gears. The gear lever spring is hard to compress while the fitting the circlip if you do this alone. Lock the lever arm in a bench wise or have a friend to hold the lever arm while the spring is compressed. I think the spring is the same through all series from 135, 200s, 300s and up to the 5000s. Thanks!
Im glad the video helped you man, & yea its very aggravating to compress that spring, I had to get my mom to help me lol
Hi, every little bit helps. Ive been stuck in a field and ended up using a long screwdriver to get going again.
Thanks for this Jay . My massy is struck in reverse I think this will help.
Im glad it could help you, this my first CZcams video sorry about the bad filming, & let me know if u have any questions
i have the same issue... thx for the vid it was helpfull cheers
TaNgLeD2121 glad I could help man, if u got any questions just let me know
I've got the same problem.mine locking all gear I don't no what to do
Why does it get stuck in gear?
Is there a way of not getting it stuck?
bro how do u only have one sub I'm subscribing to u +1sub
thanks man, ima try to put out better quality vids soon
it is a bigger tractor than mine mine is a 1974 Massey fuergenson 135 and its in the shop now
Hi Jay! Did you get it up and running? We just got our Massey Ferguson 240 stuck also. None of the gears are locking into place, the stick gear moves very easily. Yes this video is helpful. Thank you!
Yeah after I put tht new spring in it was good as new & still is, have you took the gear shift cover off yet ?
Hi
Where did you get your spring?
Tractor parts ASAP.com
Tractorpartsasap.com
Thank you
Hi, I have a 3060 mf 4x4 tractor when put # 1 or any other gear it can't move please can you help me on this problem?
1st thing I would do is take the top trans cover off & see if the shifter spring is broken if it is most like the trans is in 2 gears at once & youll have to manually unstuck the gears with a long pry bar