Vevor Mig Super 270 Review: My Honest Opinion
Vložit
- čas přidán 14. 08. 2022
- Vevor mig super 270 Welding review. This is my honest opinion of the little inexpensive welding machine. Tool Tuesday is about vevor mig super and how it does mig welding only. Ask me any welding questions you got and congratulations to people starting their welding journey. I hope I can help ask me any questions I’ll do my best to answer them.
Here's the link to a little inexpensive welding machine 👉 www.arccaptain.com/?
For 5% off use the DISCOUNT CODE (TaylorWelding)
#pipewelding
#Pipeliner
#7018
#6010
#RigWelder
#DownhillWelding
It’s important to go to welding school but it is more important to learn how to weld. It doesn’t matter what you do just practice and keep practicing. Nobody can hold your hand. It’s up to you. American Welding Society! Welding schools!
#WeldingSchool, #RodAngle, #TulsaWeldingSchool, #LearnHowToWeld, #7018, #6010, #taylorwelding, #weldingschools
My Financial Fitness Channel: / financialfitness
👇
Here’s a link to Patriots Supply I have Been very impressed with their products
mypatriotsupply.com/?rfsn=674...
👇
Looking to buy gold and silver or roll over your IRA/401K into precious metals, call Stacey @ (318) 564-5823 she is a broker for Miles Franklin
👇
Hey guys here’s a link to the Telegram t.me/c/1790733998/1199
Disclaimer: I am not a welding instructor, personal trainer, nutritionist or financial advisor. I’m a welder with life experience that aims to bring value to your life! - Jak na to + styl
I've been using Vevor tools for a few years now, they make pretty good shop tools and if something isn't right they tend to go out of there way to make it right or they just refund your money if you're not happy with it 😉
Lincoln NR-211 Flux Core works perfectly without shielding gas! I've been using it for more than 20+ years outside in windy and sometimes rainy conditions without any issues.
Also, don't knock all Chinese welders because some of them will easily hold their own with Lincoln, Miller, ESAB, etc. at a fraction of the price!
Last time I checked Lincoln is Chinese
Jose is awesome! You gotta get him on camera more. Vevor makes all kinds of stuff, it's probably a giant factory in China. I had some screen print equipment they made and it was made of the purest chinesium. 😆
No doubt it’s from China. I told the other China tool pushing people I would not do a review but these people just sent it to me. Thought I’d see what it would do and give it away
Bought a vevor 1 hp well pump to irrigate. Good build and works as described
Chris, I really enjoy your videos. I come from a line of great welders,however dad never once attempted to teach me anything about it. His brothers and nephews went on to be fantastic welders. My cousin fabricates racecars down in Houston Tx. He is 76 and still enjoys doing it. Made a few champions. His name is James Chapman. I'm 64 and have always wanted to master stick welding so got me a small welder and went at it. Learning but not there,making some good welds. Started to throw the 7018 stick away but kept on and it is a great rod. Hopefully get me a real welder someday. It is obvious you know your stuff. Thanks for sharing your knowledge.
thank you for watching and commenting Gary
@@TaylorWelding thank you for helping us out with your knowlege
That’s a pretty neat machine! Thanks for the video bud!
Looks like a ok cheap unit for a guy maybe just learning in his garage.
Personally one of the best recent purchases that seriously surprised me was I spent $700 with the 2 year warranty for the hazard frought titanium 140 multi process.
Flux core weld 14ga handrails for a fire escape in place for a week straight 4 stories up. Flux core mig with no gas off of a 120 v plug with an 100ft 12ga extension cord. And didn't have to drag out the leads on the welding machine.
Also used it for a number of small residential backyard wekding repairs, commercial equipment installation and other things.
It's not a replacement for my miller 350p or my suitcase and deffinatly not a replacement for the 400 pipe pro or the bobcat 250. But is another tool in the toolbox when needed.
Awsome honest video as always 🤙🍻
Nice! Thanks Allen
got one of these and love it for flux core and regular mig. i did yoe the stick welder stinger and it did alright , used 6013 . tig welding works ok but i stick to mig and flux core for rough stuff. i will tell you the mig gun is 1000000x better than the other cheaper welders ive had before. also the duty cylce is pretty impressive for what it is. i paid £200 for mine and ive used worse welders for more than double this one. id give it an 8/10 just bc the price is right.
also can do aluminium without spool gun also try without the gas its just fine and will hold up
Thanks for sharing
Yea flux core should be a tiny bit of a stronger weld but looks rougher
Great video! Thanks for a practical review.
love your comments straight forward and funny love and have a blessed day 🤣🤣🤣
For what it's worth, been gas welding since 77 (Home stuff), and professionally stick since 83, mig since 99, tig and spray arc since 04 with a little welding collage. I am impressed with VEVOR products. The adapter is because the welder works with either 110 or 220. There is a switching transistor on the control circuit board that detects 110 on the ground leg, if present, machine switches to 220. Yes it works on both. except - when welding with 110 (and you do need a 50 amp 110 leg so you don't blow the breaker) max thickness is about 1/4", depending on machine. flux core works great but not as clean as solid wire with gas. best penetration is achieved with flux core & C02 gas (Dual flux welding). Try this machine on 220, I think you might be surprised. The only disadvantage with lift tig (Scratch start) is it's difficult to maintain post gas on weld when welding stainless do to you must pull the torch away to stop the arc. Hope this doesn't upset anyone. IMHO
Not me …sounds like you know what you’re talking about. Thanks for the awesome comment
I have a question then. So I wanted to get into welding and I wanted to find the best way for me to do it. I’ve mig welded and stick welded so I have experience with both but I’m not trying to buy a crazy set up. Can you stick weld more effectively with out gas then you could with mig or tig? Because I’m was thinking about getting this machine. Like mainly the welding I would be doing is just fixing stuff on my off roading truck so it’s never going to be anything crazy just welding stuff like bumpers on or making brackets if needed. Like basically just trying to find a the most cost friendly way of getting started until I decide if it’s something I want to spend more on.
@@xaphan8581did you ever end up buying one? Just wondering 💭
Thanks. I learned a lot. I may try one of them. I bought a sewing machine from Vevor. I was garbage, but they sent me another one. The second motor was garbage also.
I have no idea if it would make it through on day of welding. You usually get what you pay for
@@TaylorWelding Wow thanks. From your video, I thought it was a great machine. I guess it's because your welding is so top-notch. When I grow up, I hope I can weld like you. Very impressive. If you ever try it for a day, let us know.
I bought there manual radius roller. Works good
Glad you covered the breaker tripping! That's what keeps happening to me
Hi what this box he use and where i buy is that transformer to keep the breaker from tripping..??
Thank you.
Great video I enjoyed watching this demonstration
Glad you enjoyed it
looking great today Chris and Jose.......thanks for the information.......hope all is good in Louisiana........Paul here, over in Central Florida, yeah, Florida Man here......
Glad your here Paul … thanks for watching
from your experience with cheap Chinese welders, which brand is the best to go with? Harbor freights? Arccaptain? Vevor?
Was it me or did you use the flux core wire that comes with the machine and used argon gas mix with the fluxcore?? I have never tried using mix gas and fluxcore and I'm not sure how it would turn out?
It welded good. The flux core I used to use always had gas on them.
I like this... Do more authentic reviews like this.
Thanks Richard. I will
Hey Chris, so if your looking for one of these multi-process machines what’s a good one to keep around the shop? Miller,Lincoln, Hobart??
I really like my Miller 252
You can stick weld on it just gotta change your lead and stinger I put my titanium lead and stinger on it and it works pretty good
How to do a rolling offset, making an ISO, reading an ISO, what you do when you blow thru, cut outs and repairs, setup in general.
Thank you… great topics I’ll make you a video Josh
Man oh Man, that is some cool looking smoke trails at 12:12.......
Even the pros forget to turn their gas on ,I thought I was the only one that did that.
I have messed around with a few Amazon welders and I've just had enough. I have a passion for it so I pulled the trigger on a multimatic 255, I got tired of lack of penetration on materials they were rated for
Do you like it?
@@TaylorWelding machine runs 1000x better than any beads my ass can put down
@@jackofall2305i know you love that 255! thats what i really wanted, ive got a 140 lincoln mig, a 180 lincoln mig and a miller ac/dc 225 & scratch start tig right now, why am i watching Chinese welder videos i dont know lol, really want some sort of multi process machine in the 250 amp range, though it probably wont be a low cost unit from china, parts availability scares me off from them.
Good video!In the tests you have done with the machine it would be possible to have good results welding thin 20 or 22 gauge sheets.
I have no idea. I haven’t tried super thin metal.
Do a video on amps for bead hotpass and cap on pipe , some of us start welding without a good heat or starting amps. Thanks and keep up the interesting videos
At least you got a case for your glasses!! Mine just came in plastic!! Lol😂
I taught myself how to gasless mig with one of these today. It welds just fine without gas, and I seem to have gotten far less spatter than what you got with your test. For people on a budget who need something that just works, I think this 3-in-1 is a great deal.
Did it say to change the polarity if your running solid wire with gas?
I did not see it any where
Great video not bad now we Tig
Looks pretty cool for a hobby/garage Mig. The Yeswelder one gets a lot of youtube attention. I've never seen this one before.
Yes welder has been reaching out. I’m not crazy about reviewing Chinese welding machines
I told them no
@@TaylorWelding Ya, I wish we made then here.
@@coctailer They'd be three times the price too.
I have a question for you can run a 3-phase welding machine on a single phase ? the second question can you run a 3-phase welding machine with a phase converter. Thank you!
Sorry buddy I’m not Electricion. But yes I think lol
So was that there flux core wire and u ran sheilding gas also I honesty just run flux in my Hobart and it works great for me lil bit of spatter but yea it's great for the most part
Cool I’ve never had much luck with that
aweosme review, no bs
Thank you
Your so funny but I like you give a real opinion keep it going great vids
I gotta say its nice to see a fella with a sharp knife instead of them others guys whip out a knife and tear and saw away on the thinnest material😉
I always have a razor sharp knife… well most of the time anyway. I use knife works sharper all the time to keep it that way
They make damn good welding screens
Great video
Thanks, Jim
Jose seems like a good helper
The best !
That guy you got there👍💯
Hey Chris, I have never heard of 5/64 [.078] tungsten, Now I have heard and used the following....020, .040, 1/16 [.062], 3/32 [.093], 1/8 [.125], 5/32 [..156] , never had the need or the power to run 1/4 inch tungsten...... ...and that .020 is very thin....almost a R.C.H. size....it breaks very easy too......hope this helps someone......those look like type 17 ,18, and 26 style torch parts by the way.....Paul....
Thanks Paul. The only time I tig is on pipe . And that’s usually just the bead
Rely on a Hitbox flux core machine all day every day - it never lets me down. If I had to recommend one, I'd say Hitbox.. I run a Yeswelder stick machine - also tiny, also ultra dependable, also welds beautifully. Buy either 'cos they're excellent.
Have bought loads of other welders btw - I buy a lot of welders. Hitbox or Yeswelder. Best.
Dang man. They sent you a multi process machine to test, and you only do mig, and you don’t even do a version without gas shielding. If it’s that much of a bother, let José do the review.
That’s a good idea. Although they were very happy.
I think the glasses are his favorite part
Yep
I want on so bad how much was it
Chris, is it dc tig only or AC/dc tig capable?
I don’t know
I’ll look
I’m looking for a welder for home. I think it fits the bill.
What kinda jaws are on that vise ? I never seen one like that?
I don’t know my dad gave me that vice . Some kind of specialty jaws from a factory
I’m 24 did 2 years of welding school , I learned structural and Pipe welding
I can weld in all positions on pipe and plate
With STICK , TIG , FLUX , MiG . I currently hold 4 certification with the company I’m working on in Pennsylvania
2 pipe certs on 6G TiG carbon and stainless schedule 160 and 3G stick unlimited thickness , 1 sanitary pipe cert on 6G. All X-ray
I been welding 4 years and I’m getting paid $22 an hour , I didn’t get a single dollar for all the certs I have and I’m looking into moving on and get out there to make real money
Been thinking about going to Louisiana or Virginia . I was told to go down to Louisiana and bring a TWIC card with me and hopefully I would get into a good company and pass their weld test and get a good job offer . I’m confident in my welding skill done a lot of welding and passed all X-ray and bend test any advice you can give me so i keep going in the right track .
All you have to do is pass the test … you can leave that other stuff at the house.
Howdy Chris! Good to see you back. I’ve never tried running self-shielded flux core with gas. Always wondered if it would help. Sure seems to!
Flux Core is a completely different animal for sure.......you will love it.......Paul
Helps me to run gas
@@TaylorWelding yea it def looked like a amazing weld in the end
Been a coded welder for over 30 years you don't need shielding argon with flux core should be a gas less welder whats the duty cycle 60% mite work better with bare wire mate and argon gas
Idk I haven’t messed with since that day. I haven’t done much flux core welding in my career. You would know way before me
Thank you
Yeah, but did it mig super or super mig? Anything other than mig super and I’m out.
LOL ! Thanks you made me laugh
Taylor will it weld aluminum
With a pool gun it would
Would be interested in welding with this welder if you sent it to me! Need it!
You gonna have to let Hosa’ hold some of that iron , he looks under gunned standing next to you LoL
Lol!!!
I think those glasses looked more like Richard Petty's Glasses .......but what do I know, I live in Daytona, Florida......
for the price, not bad. I DOES weld fine with flux Core and NO gas.
Have you tried the TIG welding capabilities yet?
No
You need to reverse the polarity for flux core wire, .040 flux is about the same as .035 solid for settings otherwise.
Any good for alliminium?
That would be a spool gun I don’t know if they make that or not
@@TaylorWelding only over 4 meters we don’t use spool guns at work and I’m an apprentice boiler maker
@@TaylorWelding should be an interchangeable gun I don’t plan on a spool gun.
@@TaylorWelding You don't know if they make one? The company and your viewers were hoping you would know or find out about the product if your going to give an "honest" review as you say. And this was no honest review.
that hose at 5:32 , looks like a really good Georgia Credit Card to me......
Nice looking vice ! Lol
Thanks dad
Thats neat welder i love welding i just got started up building bbq grill building my first 4 now iv got an older stick welder from Sears and Roebuck. Lol yeah that old its about on its last leg i wish i could buy a Harbor freight. One just to much money like 1300 i think just don't have the extra money to get something so i can keep welding but if there anyway i could get that from you if your plans are to give it away man youd be a blessing in my life i really love welding Self taught welder im petty good at it lol every day im up at 4 am eat and in my shop welding on something i do more smaller and thin stuff im wanting to tech myself tig but cant afraid to buy me one im a tradesmen and hoping to get me a good job welding someday i weld at work now so bud if theres a chance in heaven youd help a Unger welder out buy giving me something like that man id be blessed keep up the great videos love the experience you share im just like you wed be twins lol thanks and god bless
You should swap polarity with flux core.....
I have heard many good things about theses cheep welders might get one
Why didn’t you stick weld? Wouldn’t a flux core be like a stick? Stick doesn’t use gas either.
I should’ve
I had one of those before they put their name on it stick sucked I wouldn't recommend it for that but mig was impressive for what it is tig was smooth too, just swap the the consumables its a 17 torch.
Thanks, Michael
Whats Jose looking at back there ? 🤣
Who knows
I have to disagree on the flux core wire. I think the welds are the same (just less pretty) between flux core and gas. The trick is to remember to swap the polarity. Get that wrong and the flux core welds have little penetration and are brittle.
I’m not the authority on it. thank you. I’ll try that next time.
Hay christ this is Jack from Va. You keep that little slag pecker just send me one of your wore out files I can put it with my rod savor you sent me later man like this video I got a chuckle
I’ve got a bunch of wore out files
Saludos a mi tocayo
Maybe if I had them glasses I wouldn’t have burned my eyes.
Lol ! You could weld with those glasses
Yep, Its a welder. I have been eyeballing their mag drill.
I will buy it from you today 150 bucks
As Hosea says like it to much !
FCAW runs on DCEN not DCEP like MIG
Got to have gas. Thank you
Wow them glasses
You should have used them for 15 mins of welding
And then include the picture of your sunburned face
In the review.
There's a reason why the welding hood covers your face. That's the power of the sun in front of you there
The problem is they steal the technology from the better machines they are building there then cheapen them up some more and use the stolen secrets to run out these budget machines to people that cant afford real equipment and/or know the difference. So you get a machine that is decent at everything but great at nothing and one that wont hold up to real use long-term. Its a price point for happy homeowner that will use these things so little they have no idea how to even use one correctly and probably not hit the hour window that everything starts failing in them and then good luck with customer service after the sale because they are so cheap its easier and cheaper to buy another one than fix it anyways. They are silly sending this to a field hardcore welder dude anyways....he'd probably get more out of it using it for lunchtime pistol target practice.
I thought seriously about blowing it up in a video.
@@TaylorWelding use acetylene in a gallon jugs taped to it and dragons breath 12ga rounds......if your gonna do something then leave no doubts.😎
I mean you're talking about $6k machines of course someone needs to clone it and cheapen them up. We aren't welding pipelines at home. All we need is to maybe stick together a piece of farm metal that's good in the books if it holds 5 years without paying some shop $250 an hour for a basic weld. Plus, I not buying that these fall apart in an hour I just think that's pride talking. But, duh, of course you're going to get a miller if you make 1k+ a week welding every single day, no one thinks otherwise.
Man stop clown you had me rolling with the glasses
Lol
All these Chinese machines that we all make fun of are allowing some folks to try, and take up welding. If all the machines were 2-3 thousand dollars, many people wouldn’t be able to try it and possibly start them into a career. Undoubtedly they would upgrade, but it would be a starter/learning tool.
Not a reasonable review, because you went into it without knowing the machine, and with a bad attitude toward it from the beginning.
I thought the machine did pretty good for what it is.
@@TaylorWelding Your review sucks.
Thank you. Your review sucks as well.
@@TaylorWeldinghis review was that of a c***Y Karen
I bought a hot plate for cooking from Vevor and the extension blew out my fuse box for my entire apartment in the first setting under 5 seconds. I never got to use the product. They gave me a big runaround for a couple of weeks with 6 different people including trying to call the head office which is technically under another company name in California.These items dont come from 1 warehouse it come from other businesses, the end result was thet didnt offer me a full refund nor did they take the product back. The packaging smelled like harsh chemicals. I will never trust anything Vevor sells ever again. The chemicals that come out of those bags I believe are carcinogenic and can cause cancer.
They hired three ladybois from Thailand 🇹🇭to weld tubes at my job
Interesting.
Might as well skip the TIG review and review the chipping hammer.... Geesh. More effort please.
Wow! I thought I was going to be the only one that did not like your review. But as I read all the comments your product review is getting roasted. Just stick to welding and leave the bad attitude home.
Roger
Lol! One of the worst welding reviews I've watched. I call them welder snobs , if you don't use gas don't even try ? If you're buying this welder for stick welding don't even bother? I've got this welder on my service truck & use the stick , welds great ! (Gas is very expensive and sensitive to wind)
Junk stay away can’t get parts they don’t stand behind their product
This is the worst review I ever seen , when you review something you try everything no what you like only , you didn't have everything for the Tig , ok, but you did have it for the arc , why didn't you try , is not about you is about the product
ok
I can't find you on Instagram bro.
I’m not on there … I guess I should be
I would like to do tic tok . But my Titts aren’t bug enough!
@@TaylorWelding yeah bro, there's a huge welding community on Instagram. Even IC weld is on there. I'm not a Zuckerturd fan, but it is what it is. Tik Tok is for fake people. 😆