Go Kart Gear Box installation on 420 cc Engine
Vložit
- čas přidán 15. 06. 2019
- ****You want to be Financially Independent and Free from your Boss. Be in control of your Destiny .. Own your own Floor Care Cleaning Business.****
• Truckmount Tile & Carp...
We have Mega Videos at: / @mrbluebaron1
• Blue Baron's Truck Mou...
Check out our 24 / 7 Online Store at: www.truckmountstore.com/
You can completely bypass the jackshaft and plate and put the driven pulley directly on the input shaft of the FNR gearbox. Then you have one chain, from the gearbox output to the axle sprocket.
Only problem I see is running a drive chain with two little sprockets with such a tight radius. It causes a lot of heat buildup, possibly reducing the chain’s life.
Just put the pulley on gearbox, then chain to wheel. Both on the same input/output shaft. No need for second chain.
Should the breather cap be left on? oil leaks while driving, does this happen to you?
I drilled out the shaft on the gear box and put a bolt to hold the secondary clutch and it worked prefectly fine
How did this work out in the end, did it run and if so run well , want to do something similar with my cart
Hey nice video. How did the gearbox holdup to the 420cc motor over time?
NICE VIDEO, can you know a link or site, where I can find a gearbox to a Loncin 441 cc motor for my boat, forward and rewerse..? THANK's
so did you ever get your gearbox finished and working
But...did it hold up? We really need to know lol.
The only thing you needed to do was order a OEM comment secondary clutch or just the sheave for the clutch because they have a non built-in keyway.
Ou peux tu prendre une courroie plus longue pour mettre le gear box derrière le moteur
I'm using the same on my 18 horsepower when no problem
Using the cvt and the gear box?
Did you ever get it mounted, wondering how it handles 13hp?
What's the part number/make of the gear box? Where did you get it?
Probably was a bad idea to mounted like that
Does the name anybody use fistacul clutch anymore
where can we buy this?
Could have been a really good video. Had to leave it because of all the up down sideways movement