Printing and Using a Vspooler.
Vložit
- čas přidán 30. 07. 2024
- I have used a Pastamatic for a few months (check out the vid). I was happy with it but over time, the spools starting staying to one side and were getting very sloppy. It also took up a HUGE amount of space on my desk. So enter, VSpooler!!! #bambulab #elegoo #anycubic @SUNLU
If I get 100 likes and you comment on this vid, I'll send out my Pastamatic to someone to try out, along with another surprise.
If you like my vids, feel free to buy me a coffee. https:buymeacoffee.com3dprints747
Please make sure to hit that LIKE button! It helps get my content out there.
VSpooler:
makerworld.com/en/models/98832
Star Wars Diorama:
makerworld.com/en/models/172346
Pendulum Wave: @3dprintbunny
thangs.com/designer/3dprintbu...
I had 10 likes, a bunch of views and had to reset and reupload the video. Please like again if you did earlier. Thank you!!!!
Isn't it easier to print a TPU or ABS rim for the Polymaker spool, so that it can work on the AMS without wear/dust?
It is, but the ones I printed either cracked, slipped, or bent the cardboard trying to put them on. I printed 6 and ended up tossing them all the the recyling bin...
@@3DPrints747-ku2gm maybe they need to be scaled up. I gave a colleague with an AMS a spool of Polymaker and the STL, he printed the rim in TPU and used the spools without issues
This is an awful idea, specially if you use an electric drill to re-spool your filament. If you really need to re-spool it, first you need to at least heat up your filament, if not, your will expose it to stress and compression forces that will break it in the future. It's already happening to a lot of other users that tried to respool their filaments
That's good info. I'll definitely look into it! Thanks!!!
What are your sources for this information? I'm interested. The more I get into 3d printing the more I want to learn about various aspects of mechanical engineering as it applies to printing