HYDRAULIC PRESS FOR LOCKS NARGESA PI85
Vložit
- čas přidán 21. 02. 2008
- The Hydraulic Press PI85 NARGESA, is a NOVELTY in the world of locks. It was patented by Nargesa in 2006 which makes us leaders in the manufacturing of this kinds of machines. They fit 85% of locks of all trademarks and models.
Normally, one operative has an average time between 30 - 45 minutes to make one whole operation for a casing, handle holes and the lock hole in a square or rectangular pipe. With the PI85 Nargesa the time gets reduced to less than one minute. This is a machine for high production.
The finish is perfect, with the proper tolerance to place the lock with no need to use a bezel. Thus the assembling time is minimum.
Many companies that have bought this press for locks PI85, not only for their own use but also to sell the ready-to-be-used pipes to other companies.
The pipes that can be used with the machine are 35x35, 40x40, 40x50, 40x60, 40x70, 40x80, 50x50, 50x60, 50x70 and 50x80.
Pipe thickness can be 1,5mm and 2mm. No matter the material, it can either punch normal steel, galvanized steel or stainless steel.
It's important to bear in mind the casing must be always made in the side of 35, 40 or 50mm.
The perforation of the lock hole and the handle could be combined, it means we can punch a pipe with lock and handle on both ends, as we can as well make either the handle or the lock in the other.
The casing length is adjustable as it is as well the entrance of the lock. It ranges from 18mm to 37mm.
Characteristics of the machine
Hydraulic punching system.
Safety pedal.
Operation time 58 secodns (approximately).
Type of keyhole: Bombin.
Type of material: M.S., S.S., Galvanized steel...
Pipe Thickness: 1,5mm and 2mm
Adjustable casing length.
Adjustable lock entrance from 18mm to 37mm
PI 85 distance between axis 85mm
Motor power: 0,75 KW / 1HP.
3-phased tension: 230/400V.
For single phased machines ask quotation.
Lower bench palletized to move the machine easily to the working site or storage.
The machine is delivered completely assembled.
Packing with a steel pallet and a 3-layered cardborad box suitable for sea freight.
Optional: Complete wooden packing NIMF15
+INFO
www.nargesa.com/en/industrial-...
Prada Nargesa S.L.
Manufacture and sale of industrial machinery
nargesa@nargesa.com
Tel. (+34) 972568085
www.nargesa.com - Věda a technologie
Muchas gracias. Gracias de todo el equipo.
Muchas Gracias.
Nargesa
Muchas gracias,
Nargesa
muy interesante los vídeos para agilizar los trabajos
Agradecemos su comentario Carlos Atachagua . Si desea mas información sobre los equipos que fabricamos puede visitar nuestra página web: www.nargesa.com/es/maquinaria-industrial
Gracias por la confianza en nuestro equipo. Un
saludo NARGESA.
amios de nargesa saben que mi tutor de un curso llamado procesos industriales nos instruyo mostrando como se trabaja kn una troqueladora con su video , y me parecio muy interesante ... y nos quedo muy claro q con toda la tecnologia kn lo q aora se cuenta se esta dejando un poco de lado esto de trabajar manuealmente kn estas maquinas aun asi no dejan de ser importantes e interesantes visitare su web para obtener mas informacion Gracias.. saludos
atte. alumno ing. industrial UNT_Peru
Hola, en nargesaonline puedes descargarte el manual en pdf. Un saludo.
veeee.. tan chebre esa troqueladora....
Esta maquina no es la idonea para realizar estos trabajos.Solo sirve para perforar el alojamiento en el tubo para la cerradura.
La maquina que es ideal para realizar perforaciones en pletina es la MX340G. Vea usted el video demostrativo.
perdon ... Solera de 2" de anch, x 1/4" espesor
necesito otro tipo de maquin ? o es una maquina como esta ? ...
Amazing
Muchas gracias por su mail, y al detalle de su profesor por utilizar nuestros videos. Son mensajes como estos que nos hacen seguir luchando cada día. Si necesitan algún otro tipo de información para su instrucción no duden en contactar sera un placer. Nargesa.
Nargesa estoy interesado en comprar una ya mande mis datos pero no recibí informacion necesito una cotizacion de una mc 340G. hughesanto49@gimeil.com EEUU Phoenix AZ
Saludos de nuevo Antonio Hughes. Ayer le contactamos a su celular, el distribuidor autorizado le contactará de nuevo hoy mismo!
Como ago para tener más información estoy en los angeles california
Saludos rafy, si es usted tan amable de enviar un email a nargesa@nargesa.com mis compañeros del departamento comercial le darán la información que necesite
Hola, a mi me interesa perforar Solera de 2" x 1/4 de ancho, necesito hacerle perforaciones ccada 14 cms, y que entre un redondo liso de 3/4" y de 5/8" .... Que maquina me recomiendan ? ...o donde puedo contactarlos( su pagina no funciona) ...saludos...
nices 👍
Saber si van a estar en Bogotá feria industrial del 26 d septiembre d este sño
Saludos señor Bejarano, por supuesto asistiremos a este importantísimo evento del sector!! La empresa Aeromaquinados, Distribuidor Autorizado Nargesa en Colombia, exhibirá allí una selección de maquinaria de nuestra gama. Esperamos su visita!!
hola necesito los ruidos de la maquina porfa si se pudiera
show de bola................
hola tonylivise, pueden ponerse en contacto con nuestro equipo tecnico en nargesa telefonicamente en 0034 972 56 80 85. Un saludo y gracias por visualizar nuestro video.
do you have suppliers in South. Africa
Hello @Headman Klaas . In South Africa we make the sale directly from the Nargesa factory in Spain. Please send an email to nargesa@nargesa.com and our sales department will assist you
سلام عليكم اخي الكريم لو سمحت سعر ماكينه الدرفله ئديش سعرها ممكن شحنها إلى سوريه وهل فيها جمرك اين مقر الشركه لديكم ونحن لكم شاكرين
We are sorry we can not write in your language. The Nargesa factory is located in Spain, near Barcelona, but we arrange shipment anywhere in the world. Please send an email to nargesa@nargesa.com, our sales department will assist you. Best regards
donde puedo buscar asesoría para compra de una maquina de estas
Saludos! Por favor envíe un email a nargesa@nargesa.com y nuestro departamento comercial le asesorará
Nice how much it cost his machine
Thank you for your comment roshan luchmun. Please send an email to nargesa@nargesa.com and our sales department will assist you. Best regards
السلام عليكم ورحمه الله
لو سمحت اخي تكون تحط السعر
بدولار الامريكي والك جزيل الشكر وتقدير
Hello, please send an email to nargesa@nargesa.com and our sales department will make you a quotation
سعر المكينه mx700 سعرها كام
ر لكم جميع الخدمات و المعلومات التي تحتاجونها، نرجو ان تبعثو لنا رقمكم الهاتفي الى هذا العنوان mailto:nargesa@nargesa.com فسيتم الاتصال بكم في أقرب وقت ممكن. شكرًا على ثقتكم بنا
How many prices in this machine
@Rajesh Balmiki, please send an email to nargesa@nargesa.com and our sales department will assist you
Сколько стоит такой станок??
Благодарим за обращение в компанию Prada Nargesa!
Для получения полной информации о наших продуктах, вы можете написать нам письмо на почту nargesa@nargesa.com на русском языке, мы ответим вам в самое ближайшее время.
how much this machine price
Hi @jagdish singh. Please send an email to nargesa@nargesa.com and our sales department will make you a quotation
Quiero martillo pilón punzonadora roladora de tuvo 2hornos para herreria
Saludos señor Bejarano, puede usted contactar directamente con el Distribuidor exclusivo Nargesa en Colombia a través de nuestro sitio web oficial: nargesa.com/es/distribuidores-autorizados
O puede visitarles:
Comercializadora Aeromaquinados
Carrera 42 No. 33 - 39
Sector Fabricas Unidas
Itagüi
PBX +574 4448266
Cómo cuánto es el precio
Saludos Mauro jose Vera. Por favor envíe un email a nargesa@nargesa.com y nuestro departamento comercial le hará la cotización de este equipo
buona sea sono castelli giuseppe della soc infissi flaminia, potrei sapere prezzo per la pressa scasso per serratura, buona serata e grazie
Buon giorno, signore @Giuseppe Castelli. Si prega di inviare una mail a nargesa@nargesa.com e il nostro ufficio vendite ti fornirà un preventivo. Apprezziamo il vostro interesse
the prix pls
Hello @roshan luchmun. You can see the price of this machine in our website: www.nargesa.com/en/industrial-machinery/hydraulic-press-locks-pi85
Hi sir
मशीन की रेट क्या है
Hi sir, please send an email to nargesa@nargesa.com and our sales department will assist you
lo corta como si fuera mantequilla.