Kawasaki Ninja ZX-6R Tail Tidy Fender Eliminator Install / Start to Finish / 2024 - 2019

Sdílet
Vložit
  • čas přidán 18. 03. 2024
  • Complete start to finish and how to, for this and most other tail tidy fender eliminators out there for the ZX6R. Installing this was not difficult and doesn't require anything more than a 10mm and 8mm socket on a ratchet, 5mm hex head wrench or bit, a straight screwdriver and a Phillips. The fit and finish are great and the finished product looks like it came from the factory. Our kit utilizes the factory stock led turn signals and license plate light, so no splicing of wires or adapters are needed. This is not an integrated taillight kit, it maintains the factory brake light on the tail. A very cheap and affordable option that is budget friendly but cleans up the rear of the bike to make your motorcycle look the best it can. Works on years 2019 2020 2021 2022 2023 2024 2025. Whale tail gone! Comment with any questions, enjoy!
    Tail Tidy Fender Eliminator $37 - amzn.to/3PQybdt

Komentáře • 57

  • @cocky_potato
    @cocky_potato Před 4 měsíci +11

    Ah, my absolute must do mod, no questions asked, for anyone with a sportbike.

  • @stonemove4207
    @stonemove4207 Před 22 dny +1

    just ordered it, can't wait to try it out !! Thanks for sharing this tutorial with us !!

  • @Sammyalqattan
    @Sammyalqattan Před 3 měsíci

    Bro you’re a G! You’re making all the work i did easy for me without having to think how im gonna do it! Appreciate you!

  • @troywidner970
    @troywidner970 Před 4 měsíci +1

    Just put my fender eliminator on yesterday, looks great! I love my new ZX-6R, you were right this thing is amazing! Rides and handles like a dream....

    • @bikesandbangs
      @bikesandbangs  Před 3 měsíci

      Awesome man! Yeah this thing is a street slayer 👍

  • @chacemaye4829
    @chacemaye4829 Před 4 měsíci

    I love that bike too! And great videos, you're really good at explaining everything thoroughly and easily.

  • @SmokeyTheBear00
    @SmokeyTheBear00 Před měsícem

    Thanks for the help I just got a 2024 zx6r! Installing the kit tomorrow

  • @tolitsdterrible4785
    @tolitsdterrible4785 Před 3 měsíci +3

    I think you can use tape to hold those four bolts to temporarily and remove them one by one to fix them.

  • @alexismacias7256
    @alexismacias7256 Před 3 měsíci

    I went ahead and used the lower bolts , and re-used the side reflectors to place on top . The bike looks Sexy! thank you brother for showing how 🤙🏻💪🏻

  • @rvizzlecbr
    @rvizzlecbr Před 3 měsíci

    Great video, thanks!

  • @ronnelsolis
    @ronnelsolis Před 17 dny

    Thank you!

  • @JRemy617
    @JRemy617 Před 4 měsíci +1

    Good video. I’ve been looking to get a tail tidy but didn’t want to lose turn signals and get an integrated tail light. This is a good way to get rid of the bulkiness and still comply with the law that states the turn signals need to be 12 inches from each other.

    • @bikesandbangs
      @bikesandbangs  Před 4 měsíci +1

      Thanks man! Yeah I'm beyond impressed with this kit, the price is right and it looks great

  • @simplytrece
    @simplytrece Před 4 měsíci

    I love your vids bruh, so great and so informative, now you got me thinking of doing these also on my 2024 zx6r heh, wonder if you also noticed the horns on our bikes are too quiet.. thinking of changing it too.. if you have any plans changing it, please do make a vid as well. Thanks!

    • @bikesandbangs
      @bikesandbangs  Před 4 měsíci +2

      Honestly I have not pressed my horn yet now that I think about it lol I'm gna do that tmrw and see what it sounds like. I'm curious now! Thanks man!

  • @Namedyr
    @Namedyr Před 3 měsíci

    Nice job! Looks neat. They dont ship to sweden tho. Darn it. 😢

  • @slowzuki
    @slowzuki Před 2 měsíci

    Thanks 🙏

  • @SignatureAuto_
    @SignatureAuto_ Před 4 měsíci

    Nice video thank you!
    I’m trying to decide between this and Indian Scout bobber I know total different bike
    Any suggestion

    • @bikesandbangs
      @bikesandbangs  Před 4 měsíci +1

      Well Indian is announcing a new scout model on April 2, so I think we should wait and see what it looks like. Supposedly a new high hp engine, shorter wheelbase, different frame, it sounds like a totally new bike

  • @ObsidianZx6R
    @ObsidianZx6R Před 4 měsíci

    The same one I got. Still haven't gotten a chance to get out and try the wheelies.

    • @bikesandbangs
      @bikesandbangs  Před 4 měsíci +1

      Nice! This is a great little tidy. Gotta have those mastered by summer! 👍

  • @cheeks8094
    @cheeks8094 Před měsícem

    You explained so well that I watched it once. 🫡

  • @Logan_5.0
    @Logan_5.0 Před 3 měsíci

    The bolts were so hard and awkward but it was so worth the struggle!

    • @bikesandbangs
      @bikesandbangs  Před 3 měsíci

      Yeah it's a process lol but it works and all goes together and looks great 👍

  • @Sammyalqattan
    @Sammyalqattan Před 3 měsíci

    Heyy quick question! So i just got rid of the servo wires for new exhaust. In your video you said if the servo gets removed the check engine light will come on. Im also going to install fender eliminator. Will moving the servo turn the check engine light for me or should it be fine?

    • @bikesandbangs
      @bikesandbangs  Před 3 měsíci

      As long as the servo is still plugged in, the cables can be taken off and you won't get any check engine light

  • @javywavy4880
    @javywavy4880 Před měsícem

    I bought my zx6r with the Eliminator without any turn sinals any idea where could i buy turn sinals to fit the bike?

    • @bikesandbangs
      @bikesandbangs  Před měsícem

      www.kawasakipartswarehouse.com/oemparts/p/kawasaki/23037-0551/lamp-assy-signal-led-rr-rh
      www.kawasakipartswarehouse.com/oemparts/p/kawasaki/23037-0552/lamp-assy-signal-led-rr-lh
      They are $115 each if you want the exact OEM Kawasaki signals. I would go aftermarket if I were you

  • @cocky_potato
    @cocky_potato Před 3 měsíci

    You know what would be cool?
    A vid showing how to properly install a USB port!

  • @lordgdk
    @lordgdk Před 2 měsíci

    Hey bro, what exhaust is that or what mods have you done to your 636?

    • @bikesandbangs
      @bikesandbangs  Před 2 měsíci +1

      I have de-catted the factory header, put that no name link pipe and muffler on, and the ECU has a Moore Mafia tune on it. I have videos on everything, check out the channel, links are always in the description for all parts used 👍

  • @unklexsam
    @unklexsam Před 2 měsíci

    Your servo was supposed to go under the silver piece when you put it back I watched before you took it off

    • @bikesandbangs
      @bikesandbangs  Před 2 měsíci

      You are correct, I just saw that. Since I don't have the servo cables anymore it kinda just mounts anywhere under the seat. Good eye 👍

  • @akangconkel-37
    @akangconkel-37 Před 4 dny

    Indonesia hadie❤

  • @johnycash769
    @johnycash769 Před 4 měsíci

    I'm actually thinking on getting this fender eliminator for my zx6r .. but I don't know if I should get any after-market turn signals or leave the ones from factory ... do you know any good aftermarket turn signals?

    • @bikesandbangs
      @bikesandbangs  Před 4 měsíci +1

      You could get whatever signals look best to you and then just splice them to the wire and connectors of your factory signals, so it's plug and play then

    • @johnycash769
      @johnycash769 Před 4 měsíci

      Thanks ... ride safe 🏍

    • @bikesandbangs
      @bikesandbangs  Před 4 měsíci

      U too man 👍

    • @johnycash769
      @johnycash769 Před 3 měsíci

      @bikesandbangs wts up bro ... I tried to change mine, but I instead of the factory signals I got an after market signals, when I installed it I notice they were not working good.. so I put back the factory signals , but now they not flashing, not even on the dash .. do you think I messed up something??? 😅😅😅... heeeeelp !!!

    • @bikesandbangs
      @bikesandbangs  Před 3 měsíci

      Did the aftermarket ones have connectors that plugged straight into the bike or did u splice them onto the harness and connector of the factory signals?

  • @thomasolson8417
    @thomasolson8417 Před 4 měsíci

    @1:54 wassup lil tree rat? :)

    • @bikesandbangs
      @bikesandbangs  Před 4 měsíci

      Haha I didn't even notice him zip across when I was editing this. Sure enough, little guy wanted some of the spotlight 🐿️

  • @Screenwriting
    @Screenwriting Před 3 měsíci

    Why do so many manufacturers do this? The new Harley Sportster is the worst offender.

  • @crisrlok192
    @crisrlok192 Před 3 měsíci

    SQUIRREL 🐿️