Appreciate the detailed information on setup with the wizard, LAN connectivity, client software for PC and phone app. You answered many questions I had. GREAT VIDEO! Most other CZcams videos just fly past the wizard and the things a user runs into which does not answer questions users have for the wizard.
Just acquired a Reolink RLN16-410 for our church and this video really helped me move forward with my installation that the supplied documentations do not provide. This is a very thorough step-by-step guide to the installation of a new NVR security camera system. Now I understand what I did wrong with the initial set-up that I thought that I could do through my cell phone. Thanks for a great video!
This was a wonderfully informative video. Thank you for approaching it from a lay-person's perspective. And thank you for taking the time, effort and expense for making the video.
Nice walk through. I think the wizard might be different now. For example: I didn't see ntp settings or the ddns. There are quite a few things that are not hard as you mention, but not clear until you figure it out. The cameras auto-connecting is perhaps the easiest part.
Very good video. I've been considering purchasing this NVR. I use Blue Iris now but would like to offload the task to a dedicated device. I wonder if this NVR will support non ReoLink cameras using onvif or another protocol?
I totally agree. The Reolink has so many technical settings etc that you have to almost be a tech wizard to understand. It's like something from the 1990's! Why can it not be a more simple plug and play with features like automatic firmware updates if the NVR is connected to the internet?
A tech piece can have myriads of fine tune options - that is NOT a problem. THE problem is that chinese menu designers aren't capable of putting the in right order. For example (one of tens of examples) - I choose a camera/channel, make a change in one menu and then go to Recording, or Display or other menu and expect that channel is still selected so that I continue adjusting that very channel. But Nooooo, it is back to channel 1 again. And again you have to chose the necessary channel to edit settings. Every single time.
Excellent video!!!! I was at 11:21 and seen that you have non Reolink cameras working on your POE+ switch with the Reolink NVR. I was wondering if you could share your settings for those cameras please? I would real appreciate your help with this and many more of your subscriber probably would like the same too. This would make a great video if you have the time to spend to let all of us know what works on your system. Thanks again for your time and we all really appreciate your hard work to make theses excellent videos that you share on CZcams!!! Oh have have Dahua cameras if this help.
Great video on explaing everything, much appreciated... Is it normal for the hdd on the hub to keep flashing red all the time or is something not right?
My Reolink NVR screens look a little different than yours, but I was able to get thru the Wizard. Thanks for the video. NOW... I'm trying to add an Annke brand ONVIF POE dome camera. I would love to see a detailed video for that. The videos I'm finding seem to think we're all familiar with IP and Subnet and yada yada. We need step by step explanations. Please Help Us!!!
I want the 16 ch but w| 12 cameras, can i choose to have those 12 cameras show ONLY without having to have 4 black boxes that shows “video loss”? Or what are the camera boxes configurations/options for a 16 ch?
Question: If i'm in a remote location can I call up all the cameras from my mac book pro via the internet and do real time monitoring minus the obvious delay due to electronic proccessing?, if I have the NVR connected to my home router??
Can you record and play back at the same time in the software when connected to the network? I will not be connecting to the internet, as this will all be done on the local network. Any help would be appreciated. I am looking for a PoE camera that records at 30fps or better where the footage will be able to view numbers on moving objects (sports racing)
Does the reolink NVR bring a function to clear a drive,I have an existing survalence system,and I'm swapping it for a reolink system but I need to put the western digital 4tb Hardrive in the new reolink system,do I just swap the drive and thats it?? Thanks 👍👍👍
On Reolinks webpage they state "dont use with other than Reolink cameras". I need confirmation (becuase I am extending my system), Does this 8 and 16 channel PoE NVR work with Annke C800 and an older TrendNet camera??
I have bought nVR and a camera. So far so good when on home network. But as soon as I am on cellular the remote connection is very slow. Do you also have slow connection?
Thanks for the great video. I currently have a 16 camera reolink system and love it. I've ordered another NVR for 8 cameras and purchased 4 more cameras. Is there a way to connect both NVR's to work seamlessly with the app on my phone for viewing?
Glad you liked the video. When you add the second NVR to your phone, all the cameras on the second NVR will be listed below the cameras from the first NVR. It's pretty cool and totally seamless.
I’m trying to replace a SwannView NVR with this model Reolink RLN8-410. I have 6 IPOE Swann cameras from the previous installation. The system does not recognize the cameras. Any ideas?
Just got the RLK8-810B-4-A system. Love it like I knew I would. Already had one of their wireless cameras. One problem though. The supplied mouse does not work. Went through their charts to diagnose to no avail. Neither usb connectors works on the mouse. The mouse does work on the desktop as soon as plugged in. I don't think I would ever use the mouse.... but it bugs me when things don't work right. I sent them a message so hopefully it will get resolved:) I tried going through the wizard it just took me to the computer app and not all this setup stuff. Maybe b/c I already had the app for the first camera I had? Also I dont see any wizard to select to go back to...
I have just purchased the NVRRLN8-410 with 4 D-500 cameras. Where can I find the UID number for the cameras as there is nothing to scan? Also how can I connect these cameras to reolink client for windows?
Can you recommend an HDMI splitter that actually works with the Reolink RLN16-410 model? I lost count on how many I've bought and none of them worked. I have 3 screens to share the images to but cannot find an HDMI splitter that's compatible in 4k. I've talked to Reolink customer service and I was told there's none, but I refuse to believe that because I found one from Walmart, but it shoots the image in 1080. Any idea ? Thank you in advance :)
Thanks for the detailed explaination. I appreciate your hard work. I have 1 question, is it possible to record 4k video with 2k monitor ? I plan to buy separate item which are the Reolink NVR 8 channel and 1 unit of Reolink RLC-810A.
I can get my system to work on my tv. On the wireless app it wont connect.im wondering if its because I have a 2.4 Ghz wireless? It will say cant connect. Even if I enter the UID or LAN. The device name shows up on my app but won't let me connect. I've removed and tried again. I did try static and DHCP as well. Also for camera names. Even though I have 3 cameras. I cant get camera 1 to come up. It will come up with number 4 but not 1 so that box is always saying video loss.
I have a problem with my NVR everytime I dont have TV on after a while it seem to go to one of the Video Loss pictures even if all them (Video loss) are disabled from previewing. So when I turn my TV on to check CCTV after while its on single video loss previewing which I find very strange. I also disabled auto reset and preview tour. Unless it's done by power cut????
My NVR won't sync the NTP. It doesn't have the "no network" message showing so I'm assuming it's connected. I can't get remote access on my phone either, says it connection failed. Any ideas?
If I have continues recording 24/7, can I export for example a 45 min long clip from the nvr? I want the full clip and not multiple 5 min clips for example.
Great video thank You ! I’ll save it and replay it when I receive my nvr to aid me in its set up … can you please tell me what monitor you are using , what monitor do you Reccomend …if I wanted to get one. .. can I use my regular TV for the set up Again thanks 🙏 oxoxo
Anyone had trouble with picture not showing when you switch from grid view to full screen when viewing directly from a monitor connected to the nvr. The video is showing in grid view but not full screen. Wont show video in playback either. I have x4 rlc822a cameras and a rln8410 (new model)
Thanks for confirming my set up. Does the stock camera B500 have the ability to zoom? Or can it be enlarged in the app or on a computer without loosing clarity?
Hello my friend and thank you for the video. I’m in the initial setup and trying to figure out how to turn OFF motion detection. I want to record continuously. Cannot for the life of me find that setting. Please help. Thank you.
I was wondering which POE cameras you used beside reolink. I want to add 2 extra cameras with higher resolution and night vision. Reolink is not good in night when I tried to see license plate on street but couldn't see any number. Also I want to upgrade hdd as existing 2tb is small. Which budget HDD you recommend and I read only upto 4 tb. I have Google home and tried to add these on home it adds but didn't allow to watch camera likewise same in reolink app tried to add Google home it didn't go through. If you can help that will be much appreciated.
I like to run my desktop computer with two monitors. If was to get this system, would it require a separate monitor to run and view the NVR? Kinda don't want 3 monitors on my desk.....are there options for this I wonder?
You might want a separate monitor for getting the NVR initially setup, like I did. But afterwards, you could use the Reolink Client on your PC to control the NVR, including seeing the live feed and playing back and exporting past footage.
Hello if I want inside to app reolink and want connect my camera from 4g connection in my phone and not from Lan how I do this I want to be in work and see my camera, it's don't work only if I connect to router in home pls help me
Hi Thanks for the video. Is there anyway I can record some Reolink CCTVs that live on a different network (if I get their IP address and port numbers?). I noticed in your video that you had CCTVs from a different network?
Within a home or workshop, yes, these are great in low light. If you considering using these inside in a warehouse or large business, then in you may require IR illuminators to assist with those distances.
hi I have a question , I will be setting up the reolink NVR with my reolink argus 3 pro wifi camera as you i will be testing first. but I will be setting up in a remote area of the house so i doin't understand how to boos the wifi signal. If i get a wifi range extender this will cretae a different network and different ssid and thertefore my wifi camera will be useles.. how can I solve this problem?
I think you should be able to configure the camera to the WiFi extender. The NVR and the camera will be on the same network even if the network has multiple WiFi access points. Also, is that camera battery operated? If so, I don't believe NVR will work with it.
I just bought my Reo setup. How loud is the NVR on a regular basis--like a network switch loud (i.e. continuously running internal fan)? I'm trying to decide whether to place the NVR in a cooler remote location or my office.
A switch or even several switches can be connected to the LAN port with no issues. Only the important configuration to get the basics working were setup in this video. Do you need help on a particular screen?
Initial setup should be done with a monitor plugged into the NVR. With the NVR hardwired to your network you can manage it over managed using your cell phone or PC over Wifi.
Hell, please i need your help here: i installed my new RLN12W Reolink NVR, i connected on this two E1 zoom Wi-Fi cameras and one Reolink Video Doorbel Wifi. But now, i have a conflict of NVR Wi-fi connections 2.4G/5G with my router Wi-Fi connections 2.4G/5G. If i name the Wi-Fi connections from NVR like router Wi-Fi connection names, i get conflict...if i give them separate names than my router, the caemras dont connect anymore. Any advice here please, how to fix the problem?
I'm having an issue with playback only keeping about 6-7 days. I'm needing atleast 2 weeks worth of footage. Is there some setting I can change to make this happen or does the system ONLY keep 7 days worth no matter what?
You can lower the camera video quality or add a larger hard drive. I bought a bare 8 camera NVR and put a 4TB hard drive in it. It has an ESATA port for another 4TB. The newer NVR's can have up to two 6TB hard drives.
It has a 4mm lens with a viewing angle of 87° X 47°. It's a wide field of view due to its huge 1/2.8" CMOS sensor. For more information on factors that influence viewing angles, see my detailed view on the subject: czcams.com/video/e2e05usL3Sg/video.html
No, it doesn't prompt you. The NVR will automatically delete the oldest footage file by file and create room for new footage as required. It's like a rolling timeline. If the drive is full, it will delete 1-2 old files to make room for the new one. Once it's full again (an hour or so later), it will delete the oldest 1-2 again and write the new.
Hey there. I have the rln 8-410 and wanting to know which wireless mouse works with this nvr??? I have Googled it but nothing really confirms any. Reolink doesn't even know so anyone got a wireless mouse working on it???
I have tried a couple wireless mice on this NVR and they did not work for me either. It seems Reolink does not support the drivers required for this hardware. It would be an awesome feature but unfortunately it doesn't seem to be an option at this time.
I restored my device and still can’t get it to detect the HDD. The HDD was detected a few days ago then the power went out and since then it doesn’t appear. Any ideas?
@@HomeTechDIY did you end up testing this? I have the same Q...cant seems to get the correct port/frame rate settings so that ColorVu are seen by the reolink NVR
A TV that has an HDMI port will work. There is a chance that the edges of the TV might not fit and you could lose a very little part of the edge, but for setup and regular use, a TV should be fine.
@@HomeTechDIY I’ve installed two cameras so far. The first one went well. Push notifications let me know the difference between person, pet and car. When I installed the second camera, all my push notification in that camera read “motion detected”. I rebooted the app and now both cameras have the same problem. Do you have any suggestions? Thanks so much
The IR lights come on automatically in low light situations and remain on all the time. Their functionality is not connected to the motion detection for these cameras. The Argus functions differently however.
I'm having trouble setting up my email but that's a different issue. I mounted all my cameras and hook them up to the NVR and then set up my reolink app. But when I turned off the Wi-Fi on my Android phone I could not connect to the cameras. So I connected the NVR to my router and connected it to my television to try to run the setup. I did not see anything in the process on how to tell the NVR with the Wi-Fi name and password is. Is there a step or two that I am missing in order to view my NVR data on my Android phone when I am out of my Wi-Fi network
The NVR does cannot connect to the WiFi, it has to be hard wired into your network. Are you cameras plugged directly into the NVR or are the LAN cameras which are connected to your network and then accessed by the NVR? It sounds like you cameras are LAN cameras. When adding devices to your phone, did you add the cameras or the NVR? I think you need to add the NVR and the cameras will appear.
Hello, i need your advice...tell me please, i bought a new RLN12W NVR, installed and managed to activate my cameras , but i dont understand, now i can unplug the internet cable from NVR to let this on Wi-Fi or must be always connected to internet with cable? This NVR is not with cable ad wi-fi?
@@HomeTechDIY Ah, i understand, thank you very much. I noticed, because i unpluged my internet cable and the cameras gone off. IS bad, because i bought a new Tenda TX27 Pro router, and damn router have only 2 LAN's, in one i have my laptop and in the other one i have a Boavision Camera at my balcony, for my car. I tried to add this non Reolink camera to my NVR and i didn't succeded, i tried with onvif setting and with IP, but i couldn't add this, i guess Reolink don't allow other cameras to connect with their things. Any advice please, how to connect this camera with Reolink NVR? This means i have to unplug the camera cable to put internet cable for NVR, because my router have only 2 LAN's, sadly, is the latest router with Wi-Fi 6, but sadly have only 2 LAN's and one useless for me IPTV or something. Can i add something in one LAN port, to make from there 1 LAN for camera and one LAN for NVR? Is there any device i can plug in one of the 2 LAN'S? Forgive me, i am new with these things.
Since your router only has 2 ports, you can split one of the ports into many using an unmanaged network switch. This will give you more ports for other devices. Here is a picture of how it works: cdn.ttgtmedia.com/rms/onlineimages/whatis-network_switch.png Here is an example of one on Amazon. Connect this to your router and you will have many more ports. Make sure you have enough CAT6 ethernet cables. Switch link: amzn.to/4bunkOn You are on the right track to add the Boavision camera to the Reolink NVR. Make sure ONVIF is turned on in the Boavision camera. Manually enter the Boavision camera's IP address in the Reolink NVR. It should look like 192.168.0.?:8080. I am not familiar with those cameras, but you might even need to setup up an ONVIF user in the camera's app. That said, certain cameras are not compatible with the Reolink NVR. Hope this helps.
@@HomeTechDIY I tried last night both ways, onvif and ip, i didnt managed to connect Boavision camera with Reolink NVR, maybe i did something wrong? The NVR add the camera, but saying failed to give me image.
Appreciate the detailed information on setup with the wizard, LAN connectivity, client software for PC and phone app. You answered many questions I had. GREAT VIDEO! Most other CZcams videos just fly past the wizard and the things a user runs into which does not answer questions users have for the wizard.
Just acquired a Reolink RLN16-410 for our church and this video really helped me move forward with my installation that the supplied documentations do not provide. This is a very thorough step-by-step guide to the installation of a new NVR security camera system. Now I understand what I did wrong with the initial set-up that I thought that I could do through my cell phone.
Thanks for a great video!
This was a wonderfully informative video. Thank you for approaching it from a lay-person's perspective. And thank you for taking the time, effort and expense for making the video.
ALSO...Great job well thought out and edited, easy to follow and very user friendly demo! Kudos!!
This is the best i have seeing so far of explanation about setting up Riolink cameras to 410 nvr THE BEST TUTORIAL.
Thanks, it helped me so much getting through the set up wizard! 👍🏻👍🏻
Love it! Great work
Great Job. I might just buy a REOLINK. Been thinking about it!
I learned a lot from you. Great guy, may God bless you.
And may the Devil show him where the fun is!
wow, i really do have to give a thumbs up for the transition at 13:20 besides the thanks for the info :)
Thanks for the detailed video.
High quality video! Thank you!
The best video i have seen on this nvr and very well explained, thanks a lot from Malaga- Spain
Great video! Thanks! FYI, I think the "Int" in the hard drive section stands for "initialize"
More learning clarity if CZcams play speed setting at 0.75....excellent video simple and clear
Nice walk through. I think the wizard might be different now. For example: I didn't see ntp settings or the ddns. There are quite a few things that are not hard as you mention, but not clear until you figure it out. The cameras auto-connecting is perhaps the easiest part.
Thanks for sharing and I'm happy to hear the Reolink is cleaning up the wizard. :)
Fantastic video! Thanks!!
Appreciate the videos, helped set up my new Reolink system, works great. Question, is it possible to connect WiFi camera’s to to the NVR as well?
Great video, great delivery. Concise, no fluff. Keep it up!
G'day, This was just what I needed to get the clock time set to auto update.
Great video and thanks. Oh the Init is short for Initialize. It's use on the formatting of the drive is appropriate IMHO
This an amazing video thanks. And good job with explanation
Thanks this is a Big help and slow talking so you can understand it keep up the good videos .
Very good video. I've been considering purchasing this NVR. I use Blue Iris now but would like to offload the task to a dedicated device. I wonder if this NVR will support non ReoLink cameras using onvif or another protocol?
Very helpful my friend!
Thanks for that video.
Could you please briefly explain wht th 4 features on the "Option" tab of Recording are doing?
Thanks and best regards
What a great overview
Thanks for the informative video.
Great vid! How does one reinstall accidentally deleted hard drive?
Great informative video. I have just received my system. I will let you know how I get on using your video for guidence.
Great video thank you
I totally agree. The Reolink has so many technical settings etc that you have to almost be a tech wizard to understand. It's like something from the 1990's! Why can it not be a more simple plug and play with features like automatic firmware updates if the NVR is connected to the internet?
A tech piece can have myriads of fine tune options - that is NOT a problem. THE problem is that chinese menu designers aren't capable of putting the in right order. For example (one of tens of examples) - I choose a camera/channel, make a change in one menu and then go to Recording, or Display or other menu and expect that channel is still selected so that I continue adjusting that very channel. But Nooooo, it is back to channel 1 again. And again you have to chose the necessary channel to edit settings. Every single time.
Excellent video!!!!
I was at 11:21 and seen that you have non Reolink cameras working on your POE+ switch with the Reolink NVR. I was wondering if you could share your settings for those cameras please? I would real appreciate your help with this and many more of your subscriber probably would like the same too. This would make a great video if you have the time to spend to let all of us know what works on your system. Thanks again for your time and we all really appreciate your hard work to make theses excellent videos that you share on CZcams!!! Oh have have Dahua cameras if this help.
Great video on explaing everything, much appreciated...
Is it normal for the hdd on the hub to keep flashing red all the time or is something not right?
That's normal. It's letting you know that footage is being recorded.
Very helpful, thank you
My Reolink NVR screens look a little different than yours, but I was able to get thru the Wizard. Thanks for the video. NOW... I'm trying to add an Annke brand ONVIF POE dome camera. I would love to see a detailed video for that. The videos I'm finding seem to think we're all familiar with IP and Subnet and yada yada. We need step by step explanations. Please Help Us!!!
I want the 16 ch but w| 12 cameras, can i choose to have those 12 cameras show ONLY without having to have 4 black boxes that shows “video loss”? Or what are the camera boxes configurations/options for a 16 ch?
Question: If i'm in a remote location can I call up all the cameras from my mac book pro via the internet and do real time monitoring minus the obvious delay due to electronic proccessing?, if I have the NVR connected to my home router??
How do you get Blue Iris to show your Reolink NVR camera's? do you have a video for that? Thanks!
Can you record and play back at the same time in the software when connected to the network? I will not be connecting to the internet, as this will all be done on the local network. Any help would be appreciated. I am looking for a PoE camera that records at 30fps or better where the footage will be able to view numbers on moving objects (sports racing)
What’s the frame rate limit? Can I set all cameras to record to hdd on a FPS of 30 or higher?
Does the reolink NVR bring a function to clear a drive,I have an existing survalence system,and I'm swapping it for a reolink system but I need to put the western digital 4tb Hardrive in the new reolink system,do I just swap the drive and thats it?? Thanks 👍👍👍
Very good video there by you Sir.😀
Thank you very much
Does it work with a hik vision camera?
Question, Is it good idea to buy 4k monitor with this reolink system?
On Reolinks webpage they state "dont use with other than Reolink cameras". I need confirmation (becuase I am extending my system), Does this 8 and 16 channel PoE NVR work with Annke C800 and an older TrendNet camera??
I have bought nVR and a camera. So far so good when on home network. But as soon as I am on cellular the remote connection is very slow. Do you also have slow connection?
Thanks for the great video. I currently have a 16 camera reolink system and love it. I've ordered another NVR for 8 cameras and purchased 4 more cameras. Is there a way to connect both NVR's to work seamlessly with the app on my phone for viewing?
Glad you liked the video. When you add the second NVR to your phone, all the cameras on the second NVR will be listed below the cameras from the first NVR. It's pretty cool and totally seamless.
Oh my god,,,, the wizard menu is exactly the same as older Swann brand stuff 😱
Yes, the older user interface isn't the most appealing. The current NVR's from Reolink are much better.
I’m trying to replace a SwannView NVR with this model Reolink RLN8-410. I have 6 IPOE Swann cameras from the previous installation. The system does not recognize the cameras. Any ideas?
What dc power supply do i need for the reolink RLC 520A
Just got the RLK8-810B-4-A system. Love it like I knew I would. Already had one of their wireless cameras. One problem though. The supplied mouse does not work. Went through their charts to diagnose to no avail. Neither usb connectors works on the mouse. The mouse does work on the desktop as soon as plugged in. I don't think I would ever use the mouse.... but it bugs me when things don't work right. I sent them a message so hopefully it will get resolved:)
I tried going through the wizard it just took me to the computer app and not all this setup stuff. Maybe b/c I already had the app for the first camera I had? Also I dont see any wizard to select to go back to...
I have to unplug and replug the mouse into the usb port alll
the time to reboot the mouse to make it work????
I have just purchased the NVRRLN8-410 with 4 D-500 cameras. Where can I find the UID number for the cameras as there is nothing to scan? Also how can I connect these cameras to reolink client for windows?
Is it possible to set it up without monitor using just mobile app?
Hi! just a question, what is then software u are using? Reolink app/client? Which version? Thank you very much
Can you recommend an HDMI splitter that actually works with the Reolink RLN16-410 model? I lost count on how many I've bought and none of them worked. I have 3 screens to share the images to but cannot find an HDMI splitter that's compatible in 4k. I've talked to Reolink customer service and I was told there's none, but I refuse to believe that because I found one from Walmart, but it shoots the image in 1080. Any idea ? Thank you in advance :)
Amigo instale unas camaras reolink no me sale la imaguen que debo hacer
can i constantly view the nvr with the monitor connected
Thanks for the detailed explaination. I appreciate your hard work. I have 1 question, is it possible to record 4k video with 2k monitor ? I plan to buy separate item which are the Reolink NVR 8 channel and 1 unit of Reolink RLC-810A.
Glad you enjoyed the video! Yes, you can still record 4K with a 2K monitor. The camera resolution is set in the NVR.
I can get my system to work on my tv. On the wireless app it wont connect.im wondering if its because I have a 2.4 Ghz wireless? It will say cant connect. Even if I enter the UID or LAN. The device name shows up on my app but won't let me connect. I've removed and tried again. I did try static and DHCP as well.
Also for camera names. Even though I have 3 cameras. I cant get camera 1 to come up. It will come up with number 4 but not 1 so that box is always saying video loss.
I have a problem with my NVR everytime I dont have TV on after a while it seem to go to one of the Video Loss pictures even if all them (Video loss) are disabled from previewing. So when I turn my TV on to check CCTV after while its on single video loss previewing which I find very strange. I also disabled auto reset and preview tour. Unless it's done by power cut????
Two of my wired relink cameras are not working. Sats no connection. Port lights are nit lit. Ive tried everything. Any suggestions??
My NVR won't sync the NTP. It doesn't have the "no network" message showing so I'm assuming it's connected. I can't get remote access on my phone either, says it connection failed. Any ideas?
If I have continues recording 24/7, can I export for example a 45 min long clip from the nvr? I want the full clip and not multiple 5 min clips for example.
Great video thank
You ! I’ll save it and replay it when I receive my nvr to aid me in its set up … can you please tell me what monitor you are using , what monitor do you Reccomend …if I wanted to get one. .. can I use my regular TV for the set up
Again thanks 🙏
oxoxo
Yes, you can connect the NVR to your TV's HDMI connection. I use a 4K 27" monitor for my setup. amzn.to/3D2Hcs4
Thank you
Very good demonstration. What cameras will work in cold regions -20F ? Thank you
I have used these cameras in temperatures as low as -40 and there were little to no issues.
Thanks 😊
Anyone had trouble with picture not showing when you switch from grid view to full screen when viewing directly from a monitor connected to the nvr. The video is showing in grid view but not full screen. Wont show video in playback either. I have x4 rlc822a cameras and a rln8410 (new model)
Thanks for confirming my set up. Does the stock camera B500 have the ability to zoom? Or can it be enlarged in the app or on a computer without loosing clarity?
The B500 has a 4mm fixed lens, so there is no zoom option. Enlarging any fixed lens will always result in a loss of clarity.
Hello my friend and thank you for the video. I’m in the initial setup and trying to figure out how to turn OFF motion detection. I want to record continuously. Cannot for the life of me find that setting. Please help. Thank you.
Hey! Do you se the option for "Normal" under the Recording > Schedule option? I touch on this at 12:30.
I was wondering which POE cameras you used beside reolink. I want to add 2 extra cameras with higher resolution and night vision. Reolink is not good in night when I tried to see license plate on street but couldn't see any number.
Also I want to upgrade hdd as existing 2tb is small. Which budget HDD you recommend and I read only upto 4 tb.
I have Google home and tried to add these on home it adds but didn't allow to watch camera likewise same in reolink app tried to add Google home it didn't go through. If you can help that will be much appreciated.
I would also love to know if and how you can add 3rd party cameras to a Reolink nvr !
I like to run my desktop computer with two monitors. If was to get this system, would it require a separate monitor to run and view the NVR? Kinda don't want 3 monitors on my desk.....are there options for this I wonder?
You might want a separate monitor for getting the NVR initially setup, like I did. But afterwards, you could use the Reolink Client on your PC to control the NVR, including seeing the live feed and playing back and exporting past footage.
Hello if I want inside to app reolink and want connect my camera from 4g connection in my phone and not from Lan how I do this I want to be in work and see my camera, it's don't work only if I connect to router in home pls help me
Hi Thanks for the video. Is there anyway I can record some Reolink CCTVs that live on a different network (if I get their IP address and port numbers?). I noticed in your video that you had CCTVs from a different network?
You can record the cameras if they are on your home network or connected to the NVR. The cameras you noticed were connected to my home network.
Nice
is this good for indoor use? like are they good in low light
Within a home or workshop, yes, these are great in low light. If you considering using these inside in a warehouse or large business, then in you may require IR illuminators to assist with those distances.
If I lose power do I have to go back thru set-up again or does it store your settings?
The settings are stored.
Can you tell me which wireless mouse would work with this system? thank you
I don't know if any wireless mice that works with the Reolink NVR
hi I have a question , I will be setting up the reolink NVR with my reolink argus 3 pro wifi camera as you i will be testing first. but I will be setting up in a remote area of the house so i doin't understand how to boos the wifi signal. If i get a wifi range extender this will cretae a different network and different ssid and thertefore my wifi camera will be useles.. how can I solve this problem?
I think you should be able to configure the camera to the WiFi extender. The NVR and the camera will be on the same network even if the network has multiple WiFi access points. Also, is that camera battery operated? If so, I don't believe NVR will work with it.
I just bought my Reo setup. How loud is the NVR on a regular basis--like a network switch loud (i.e. continuously running internal fan)? I'm trying to decide whether to place the NVR in a cooler remote location or my office.
There is no internal fan. See a full breakdown including this information here: czcams.com/video/zwq16tF2FHc/video.html
Can you add more than 8 Reolink cameras if you have a separate Poe switch?
No, the NVR will only show and record from 8 cameras, no matter the configuration.
What about using a switch and why skip all the necessary screens?
A switch or even several switches can be connected to the LAN port with no issues. Only the important configuration to get the basics working were setup in this video. Do you need help on a particular screen?
Hello, what could be the cause of having an HD cctv with great quality in the monitor but will become blurry or pixelated upon replay?
Sounds like the live stream is displaying the main stream feed and the recording is a sub stream.
so if you set up these cameras to 4k and your monitor is HD would you be able to view the play back video to your Hd monitor ?
Yes, the image looks to be in 4K to me.
Can you remove the blank screens with video loss text and only display the used cameras?
Kinda. You can show 1, 4 or 16 cameras. You also have the ability to show one large channel and several small ones.
Good
Is it possible to a WIFI for management or does it have to be wired?
Initial setup should be done with a monitor plugged into the NVR. With the NVR hardwired to your network you can manage it over managed using your cell phone or PC over Wifi.
Hell, please i need your help here: i installed my new RLN12W Reolink NVR, i connected on this two E1 zoom Wi-Fi cameras and one Reolink Video Doorbel Wifi. But now, i have a conflict of NVR Wi-fi connections 2.4G/5G with my router Wi-Fi connections 2.4G/5G. If i name the Wi-Fi connections from NVR like router Wi-Fi connection names, i get conflict...if i give them separate names than my router, the caemras dont connect anymore. Any advice here please, how to fix the problem?
I'm having an issue with playback only keeping about 6-7 days. I'm needing atleast 2 weeks worth of footage. Is there some setting I can change to make this happen or does the system ONLY keep 7 days worth no matter what?
You can lower the camera video quality or add a larger hard drive. I bought a bare 8 camera NVR and put a 4TB hard drive in it. It has an ESATA port for another 4TB. The newer NVR's can have up to two 6TB hard drives.
What type of lens does it have? Is it a 2.8 mm lens? I keep reading that it is a 4 millimeter lens. And if that is true that's horrible
It has a 4mm lens with a viewing angle of 87° X 47°. It's a wide field of view due to its huge 1/2.8" CMOS sensor. For more information on factors that influence viewing angles, see my detailed view on the subject: czcams.com/video/e2e05usL3Sg/video.html
If you fill the hard drive does it prompt you? Does it overwrite old data and start anew?
No, it doesn't prompt you. The NVR will automatically delete the oldest footage file by file and create room for new footage as required. It's like a rolling timeline. If the drive is full, it will delete 1-2 old files to make room for the new one. Once it's full again (an hour or so later), it will delete the oldest 1-2 again and write the new.
Hey there. I have the rln 8-410 and wanting to know which wireless mouse works with this nvr??? I have Googled it but nothing really confirms any. Reolink doesn't even know so anyone got a wireless mouse working on it???
I have tried a couple wireless mice on this NVR and they did not work for me either. It seems Reolink does not support the drivers required for this hardware. It would be an awesome feature but unfortunately it doesn't seem to be an option at this time.
I restored my device and still can’t get it to detect the HDD. The HDD was detected a few days ago then the power went out and since then it doesn’t appear. Any ideas?
Maybe there was a power serge and it impacted the device. I would reach out to Reolink Support and let them know the NVR cannot recognize the HDD.
Would my ColorVu camera run on the Reolink nvr or only on Hikvision nvrs?
If it supports ONVIF, it should but I have not verified this yet.
@@HomeTechDIY did you end up testing this? I have the same Q...cant seems to get the correct port/frame rate settings so that ColorVu are seen by the reolink NVR
I just bought the RLK8-811B4. Can I use a tv as the monitor for the initial setup or do I need to buy a computer monitor?
Thanks
A TV that has an HDMI port will work. There is a chance that the edges of the TV might not fit and you could lose a very little part of the edge, but for setup and regular use, a TV should be fine.
@@HomeTechDIY thank you so much for the quick reply. Much appreciated
@@HomeTechDIY I’ve installed two cameras so far. The first one went well. Push notifications let me know the difference between person, pet and car. When I installed the second camera, all my push notification in that camera read “motion detected”. I rebooted the app and now both cameras have the same problem. Do you have any suggestions?
Thanks so much
The ir lights do they stay on all the time or do they turn on via motion detection
The IR lights come on automatically in low light situations and remain on all the time. Their functionality is not connected to the motion detection for these cameras. The Argus functions differently however.
@@HomeTechDIY ow ok thanks bit annoying if on all the time at night are they bright
I'm having trouble setting up my email but that's a different issue. I mounted all my cameras and hook them up to the NVR and then set up my reolink app. But when I turned off the Wi-Fi on my Android phone I could not connect to the cameras. So I connected the NVR to my router and connected it to my television to try to run the setup. I did not see anything in the process on how to tell the NVR with the Wi-Fi name and password is. Is there a step or two that I am missing in order to view my NVR data on my Android phone when I am out of my Wi-Fi network
The NVR does cannot connect to the WiFi, it has to be hard wired into your network. Are you cameras plugged directly into the NVR or are the LAN cameras which are connected to your network and then accessed by the NVR? It sounds like you cameras are LAN cameras. When adding devices to your phone, did you add the cameras or the NVR? I think you need to add the NVR and the cameras will appear.
Hello, i need your advice...tell me please, i bought a new RLN12W NVR, installed and managed to activate my cameras , but i dont understand, now i can unplug the internet cable from NVR to let this on Wi-Fi or must be always connected to internet with cable? This NVR is not with cable ad wi-fi?
I think the NVR has to be connected to your network with the cable. The WIFI functionality is only between the NVR and the cameras.
@@HomeTechDIY Ah, i understand, thank you very much. I noticed, because i unpluged my internet cable and the cameras gone off. IS bad, because i bought a new Tenda TX27 Pro router, and damn router have only 2 LAN's, in one i have my laptop and in the other one i have a Boavision Camera at my balcony, for my car. I tried to add this non Reolink camera to my NVR and i didn't succeded, i tried with onvif setting and with IP, but i couldn't add this, i guess Reolink don't allow other cameras to connect with their things. Any advice please, how to connect this camera with Reolink NVR? This means i have to unplug the camera cable to put internet cable for NVR, because my router have only 2 LAN's, sadly, is the latest router with Wi-Fi 6, but sadly have only 2 LAN's and one useless for me IPTV or something. Can i add something in one LAN port, to make from there 1 LAN for camera and one LAN for NVR? Is there any device i can plug in one of the 2 LAN'S? Forgive me, i am new with these things.
Since your router only has 2 ports, you can split one of the ports into many using an unmanaged network switch. This will give you more ports for other devices. Here is a picture of how it works: cdn.ttgtmedia.com/rms/onlineimages/whatis-network_switch.png
Here is an example of one on Amazon. Connect this to your router and you will have many more ports. Make sure you have enough CAT6 ethernet cables. Switch link: amzn.to/4bunkOn
You are on the right track to add the Boavision camera to the Reolink NVR. Make sure ONVIF is turned on in the Boavision camera. Manually enter the Boavision camera's IP address in the Reolink NVR. It should look like 192.168.0.?:8080. I am not familiar with those cameras, but you might even need to setup up an ONVIF user in the camera's app. That said, certain cameras are not compatible with the Reolink NVR. Hope this helps.
@@HomeTechDIY I tried last night both ways, onvif and ip, i didnt managed to connect Boavision camera with Reolink NVR, maybe i did something wrong? The NVR add the camera, but saying failed to give me image.
@@HomeTechDIY Yes, i will send you a email soon with pictures, thank you very much for helping me, i apreciate this.